On 2024/5/22 01:39, Quentin Schulz wrote:
From: Quentin Schulz <quentin.sch...@cherry.de> U-Boot proper pre-reloc is currently running out of memory on PX30 Ringneck and it is thus impossible to boot into U-Boot CLI. It is assumed the same problem can be seen on other PX30 boards though I cannot guarantee it since I don't have access to them. Fix this by migrating to the common bss and stack addresses for PX30, which drastically increases the size of the pre-reloc allocation pool (8 times bigger now). The memory layout in SPL and U-Boot proper now match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR. Signed-off-by: Quentin Schulz <quentin.sch...@cherry.de>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- configs/odroid-go2_defconfig | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index 3c1abb83ed9..f4c9b02e12f 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -2,29 +2,17 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x4000 CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2" -CONFIG_SPL_TEXT_BASE=0x00000000 CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y +# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set CONFIG_TARGET_ODROID_GO2=y CONFIG_DEBUG_UART_CHANNEL=1 -CONFIG_TPL_LIBGENERIC_SUPPORT=y +# CONFIG_TPL_LIBCOMMON_SUPPORT is not set CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 -CONFIG_SPL_STACK_R=y CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 @@ -44,11 +32,11 @@ CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set # CONFIG_TPL_BANNER_PRINT is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set
