Enable ECC 1-bit error, 2-bit error, multiple 1-bit error interrupts
by setting the respective bits in the DDRSS_V2A_INT_SET_REG register.
Signed-off-by: Santhosh Kumar K <s...@ti.com>
---
drivers/ram/k3-ddrss/k3-ddrss.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index 6cf680972808..5bc625fc2db6 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -46,6 +46,11 @@
#define DDRSS_ECC_R2_STR_ADDR_REG 0x0140
#define DDRSS_ECC_R2_END_ADDR_REG 0x0144
#define DDRSS_ECC_1B_ERR_CNT_REG 0x0150
+#define DDRSS_V2A_INT_SET_REG 0x00a8
+
+#define DDRSS_V2A_INT_SET_REG_ECC1BERR_EN BIT(3)
+#define DDRSS_V2A_INT_SET_REG_ECC2BERR_EN BIT(4)
+#define DDRSS_V2A_INT_SET_REG_ECCM1BERR_EN BIT(5)
#define SINGLE_DDR_SUBSYSTEM 0x1
#define MULTI_DDR_SUBSYSTEM 0x2
@@ -748,6 +753,9 @@ static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc
*ddrss)
/* Clear Error Count Register */
writel(0x1, base + DDRSS_ECC_1B_ERR_CNT_REG);
+ writel(DDRSS_V2A_INT_SET_REG_ECC1BERR_EN |
DDRSS_V2A_INT_SET_REG_ECC2BERR_EN |
+ DDRSS_V2A_INT_SET_REG_ECCM1BERR_EN, base +
DDRSS_V2A_INT_SET_REG);
+
/* Enable ECC Check */
val = readl(base + DDRSS_ECC_CTRL_REG);
val |= DDRSS_ECC_CTRL_REG_ECC_CK;
--
2.34.1
