On 29/05/2024 07:33, Sumit Garg wrote:
Hi Neil,
On Tue, 28 May 2024 at 14:02, Neil Armstrong <neil.armstr...@linaro.org> wrote:
Add support for bias-pull-down as an alternate of bias-pull-up.
nit: s/alternate/alternative/
Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-qcom.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-qcom.c
b/drivers/pinctrl/qcom/pinctrl-qcom.c
index 3c3336e7635..4f4e9a83949 100644
--- a/drivers/pinctrl/qcom/pinctrl-qcom.c
+++ b/drivers/pinctrl/qcom/pinctrl-qcom.c
@@ -44,6 +44,7 @@ static const struct pinconf_param msm_conf_params[] = {
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 2 },
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 3 },
+ { "bias-pull-down", PIN_CONFIG_BIAS_PULL_UP, 1 },
Did you mean PIN_CONFIG_BIAS_PULL_DOWN here instead?
Nop, I use the same flag but with the "1" argument instead of "3" which
does set a pull-down.
Neil
-Sumit
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
};
--
2.34.1
