Hi Caleb, Thank you for the patch.
On lun., juin 03, 2024 at 14:49, Caleb Connolly <caleb.conno...@linaro.org> wrote: > This is extremely similar to the MMC backend, but there are some notable > differences. > > Works with a DFU string like > > scsi 4=u-boot-bin part 11 > > Where "4" is the SCSI dev number (sequential LUN across all SCSI devices) > and "11" is the partition number. > > Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org> > --- > doc/usage/dfu.rst | 32 ++++ > drivers/dfu/Kconfig | 7 + > drivers/dfu/Makefile | 1 + > drivers/dfu/dfu.c | 5 +- > drivers/dfu/dfu_scsi.c | 435 > +++++++++++++++++++++++++++++++++++++++++++++++++ > include/dfu.h | 26 +++ > 6 files changed, 505 insertions(+), 1 deletion(-) > > diff --git a/doc/usage/dfu.rst b/doc/usage/dfu.rst > index 8cc09c308d82..f497dcf137a4 100644 > --- a/doc/usage/dfu.rst > +++ b/doc/usage/dfu.rst > @@ -21,8 +21,9 @@ U-Boot implements this DFU capability (CONFIG_DFU) with the > command dfu > > Today the supported DFU backends are: > > - MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT) > +- SCSI (UFS, RAW partition, FAT / EXT2 / EXT3 / EXT4 file system / SKIP / > SCRIPT) > - NAND > - RAM > - SF (serial flash) > - MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...) > @@ -166,8 +167,38 @@ mmc > > Please note that this means the user will be able to execute any > arbitrary commands just like in the u-boot's shell. Can we please add CONFIG_DFU_SCSI in "Configuration Options" section at the beginning of this document? See: https://docs.u-boot.org/en/latest/usage/dfu.html#configuration-options Note: I requested that here: https://lore.kernel.org/all/87o7a94pe1....@baylibre.com/ With above addressed, feel free to add: Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> And please take this through your tree: Acked-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> > > +scsi [...]
