Enable OF_UPSTREAM for am62a7-sk board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <n...@ti.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/k3-am62a-main.dtsi | 1054 --------------------------
arch/arm/dts/k3-am62a-mcu.dtsi | 170 -----
arch/arm/dts/k3-am62a-sk-binman.dtsi | 2 +-
arch/arm/dts/k3-am62a-thermal.dtsi | 50 --
arch/arm/dts/k3-am62a-wakeup.dtsi | 73 --
arch/arm/dts/k3-am62a.dtsi | 125 ---
arch/arm/dts/k3-am62a7-sk.dts | 702 -----------------
configs/am62ax_evm_a53_defconfig | 3 +-
9 files changed, 4 insertions(+), 2178 deletions(-)
delete mode 100644 arch/arm/dts/k3-am62a-main.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-mcu.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-thermal.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-wakeup.dtsi
delete mode 100644 arch/arm/dts/k3-am62a.dtsi
delete mode 100644 arch/arm/dts/k3-am62a7-sk.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5b0bcf336924..27f38908f268 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1203,8 +1203,7 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-r5-sk.dtb \
k3-am625-verdin-r5.dtb \
k3-am625-r5-phycore-som-2gb.dtb
-dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \
- k3-am62a7-r5-sk.dtb
+dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-r5-sk.dtb
dtb-$(CONFIG_SOC_K3_AM62P5) += k3-am62p5-r5-sk.dtb
diff --git a/arch/arm/dts/k3-am62a-main.dtsi b/arch/arm/dts/k3-am62a-main.dtsi
deleted file mode 100644
index aa1e057082f0..000000000000
--- a/arch/arm/dts/k3-am62a-main.dtsi
+++ /dev/null
@@ -1,1054 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family Main Domain peripherals
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_main {
- oc_sram: sram@70000000 {
- compatible = "mmio-sram";
- reg = <0x00 0x70000000 0x00 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x70000000 0x10000>;
- };
-
- gic500: interrupt-controller@1800000 {
- compatible = "arm,gic-v3";
- reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x01 0x00000000 0x00 0x2000>, /* GICC */
- <0x01 0x00010000 0x00 0x1000>, /* GICH */
- <0x01 0x00020000 0x00 0x2000>; /* GICV */
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- /*
- * vcpumntirq:
- * virtual CPU interface maintenance interrupt
- */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
- gic_its: msi-controller@1820000 {
- compatible = "arm,gic-v3-its";
- reg = <0x00 0x01820000 0x00 0x10000>;
- socionext,synquacer-pre-its = <0x1000000 0x400000>;
- msi-controller;
- #msi-cells = <1>;
- };
- };
-
- main_conf: bus@100000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00 0x00 0x00100000 0x20000>;
-
- phy_gmii_sel: phy@4044 {
- compatible = "ti,am654-phy-gmii-sel";
- reg = <0x4044 0x8>;
- #phy-cells = <1>;
- };
-
- epwm_tbclk: clock-controller@4130 {
- compatible = "ti,am62-epwm-tbclk";
- reg = <0x4130 0x4>;
- #clock-cells = <1>;
- };
- };
-
- dmss: bus@48000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- dma-ranges;
- ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>;
-
- ti,sci-dev-id = <25>;
-
- secure_proxy_main: mailbox@4d000000 {
- compatible = "ti,am654-secure-proxy";
- reg = <0x00 0x4d000000 0x00 0x80000>,
- <0x00 0x4a600000 0x00 0x80000>,
- <0x00 0x4a400000 0x00 0x80000>;
- reg-names = "target_data", "rt", "scfg";
- #mbox-cells = <1>;
- interrupt-names = "rx_012";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- inta_main_dmss: interrupt-controller@48000000 {
- compatible = "ti,sci-inta";
- reg = <0x00 0x48000000 0x00 0x100000>;
- #interrupt-cells = <0>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- msi-controller;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <28>;
- ti,interrupt-ranges = <6 70 34>;
- ti,unmapped-event-sources = <&main_bcdma>,
<&main_pktdma>;
- };
-
- main_bcdma: dma-controller@485c0100 {
- compatible = "ti,am64-dmss-bcdma";
- reg = <0x00 0x485c0100 0x00 0x100>,
- <0x00 0x4c000000 0x00 0x20000>,
- <0x00 0x4a820000 0x00 0x20000>,
- <0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>,
- <0x00 0x48600000 0x00 0x8000>,
- <0x00 0x484a4000 0x00 0x2000>,
- <0x00 0x484c2000 0x00 0x2000>,
- <0x00 0x48420000 0x00 0x2000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt",
"ringrt",
- "ring", "tchan", "rchan", "bchan";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <3>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <26>;
- ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
- ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
- ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
- };
-
- main_pktdma: dma-controller@485c0000 {
- compatible = "ti,am64-dmss-pktdma";
- reg = <0x00 0x485c0000 0x00 0x100>,
- <0x00 0x4a800000 0x00 0x20000>,
- <0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>,
- <0x00 0x485e0000 0x00 0x10000>,
- <0x00 0x484a0000 0x00 0x2000>,
- <0x00 0x484c0000 0x00 0x2000>,
- <0x00 0x48430000 0x00 0x1000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
- "ring", "tchan", "rchan", "rflow";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <2>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <30>;
- ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
- <0x24>, /* CPSW_TX_CHAN */
- <0x25>, /* SAUL_TX_0_CHAN */
- <0x26>; /* SAUL_TX_1_CHAN */
- ti,sci-rm-range-tflow = <0x10>, /*
RING_UNMAPPED_TX_CHAN */
- <0x11>, /* RING_CPSW_TX_CHAN */
- <0x12>, /* RING_SAUL_TX_0_CHAN
*/
- <0x13>; /* RING_SAUL_TX_1_CHAN
*/
- ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
- <0x2b>, /* CPSW_RX_CHAN */
- <0x2d>, /* SAUL_RX_0_CHAN */
- <0x2f>, /* SAUL_RX_1_CHAN */
- <0x31>, /* SAUL_RX_2_CHAN */
- <0x33>; /* SAUL_RX_3_CHAN */
- ti,sci-rm-range-rflow = <0x2a>, /*
FLOW_UNMAPPED_RX_CHAN */
- <0x2c>, /* FLOW_CPSW_RX_CHAN */
- <0x2e>, /*
FLOW_SAUL_RX_0/1_CHAN */
- <0x32>; /*
FLOW_SAUL_RX_2/3_CHAN */
- };
- };
-
- dmss_csi: bus@4e000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- dma-ranges;
- ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
-
- ti,sci-dev-id = <198>;
-
- inta_main_dmss_csi: interrupt-controller@4e0a0000 {
- compatible = "ti,sci-inta";
- reg = <0x00 0x4e0a0000 0x00 0x8000>;
- #interrupt-cells = <0>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- msi-controller;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <200>;
- ti,interrupt-ranges = <0 237 8>;
- ti,unmapped-event-sources = <&main_bcdma_csi>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- };
-
- main_bcdma_csi: dma-controller@4e230000 {
- compatible = "ti,am62a-dmss-bcdma-csirx";
- reg = <0x00 0x4e230000 0x00 0x100>,
- <0x00 0x4e180000 0x00 0x8000>,
- <0x00 0x4e100000 0x00 0x10000>;
- reg-names = "gcfg", "rchanrt", "ringrt";
- msi-parent = <&inta_main_dmss_csi>;
- #dma-cells = <3>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <199>;
- ti,sci-rm-range-rchan = <0x21>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- };
- };
-
- dmsc: system-controller@44043000 {
- compatible = "ti,k2g-sci";
- reg = <0x00 0x44043000 0x00 0xfe0>;
- reg-names = "debug_messages";
- ti,host-id = <12>;
- mbox-names = "rx", "tx";
- mboxes = <&secure_proxy_main 12>,
- <&secure_proxy_main 13>;
-
- k3_pds: power-controller {
- compatible = "ti,sci-pm-domain";
- #power-domain-cells = <2>;
- };
-
- k3_clks: clock-controller {
- compatible = "ti,k2g-sci-clk";
- #clock-cells = <2>;
- };
-
- k3_reset: reset-controller {
- compatible = "ti,sci-reset";
- #reset-cells = <2>;
- };
- };
-
- secure_proxy_sa3: mailbox@43600000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x43600000 0x00 0x10000>,
- <0x00 0x44880000 0x00 0x20000>,
- <0x00 0x44860000 0x00 0x20000>;
- /*
- * Marked Disabled:
- * Node is incomplete as it is meant for bootloaders and
- * firmware on non-MPU processors
- */
- status = "disabled";
- };
-
- main_pmx0: pinctrl@f4000 {
- compatible = "pinctrl-single";
- reg = <0x00 0xf4000 0x00 0x2ac>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_timer0: timer@2400000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2400000 0x00 0x400>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 36 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 36 2>;
- assigned-clock-parents = <&k3_clks 36 3>;
- power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer1: timer@2410000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2410000 0x00 0x400>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 37 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 37 2>;
- assigned-clock-parents = <&k3_clks 37 3>;
- power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer2: timer@2420000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2420000 0x00 0x400>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 38 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 38 2>;
- assigned-clock-parents = <&k3_clks 38 3>;
- power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer3: timer@2430000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2430000 0x00 0x400>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 39 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 39 2>;
- assigned-clock-parents = <&k3_clks 39 3>;
- power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer4: timer@2440000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2440000 0x00 0x400>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 40 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 40 2>;
- assigned-clock-parents = <&k3_clks 40 3>;
- power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer5: timer@2450000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2450000 0x00 0x400>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 41 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 41 2>;
- assigned-clock-parents = <&k3_clks 41 3>;
- power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer6: timer@2460000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2460000 0x00 0x400>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 42 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 42 2>;
- assigned-clock-parents = <&k3_clks 42 3>;
- power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer7: timer@2470000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2470000 0x00 0x400>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 43 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 43 2>;
- assigned-clock-parents = <&k3_clks 43 3>;
- power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_uart0: serial@2800000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02800000 0x00 0x100>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 146 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart1: serial@2810000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02810000 0x00 0x100>;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 152 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart2: serial@2820000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02820000 0x00 0x100>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 153 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart3: serial@2830000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02830000 0x00 0x100>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 154 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart4: serial@2840000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02840000 0x00 0x100>;
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 155 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart5: serial@2850000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02850000 0x00 0x100>;
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 156 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart6: serial@2860000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02860000 0x00 0x100>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 158 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_i2c0: i2c@20000000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20000000 0x00 0x100>;
- interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 102 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c1: i2c@20010000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20010000 0x00 0x100>;
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 103 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c2: i2c@20020000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20020000 0x00 0x100>;
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 104 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c3: i2c@20030000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20030000 0x00 0x100>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 105 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_spi0: spi@20100000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x20100000 0x00 0x400>;
- interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 141 0>;
- status = "disabled";
- };
-
- main_spi1: spi@20110000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20110000 0x00 0x400>;
- interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 142 0>;
- status = "disabled";
- };
-
- main_spi2: spi@20120000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20120000 0x00 0x400>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 143 0>;
- status = "disabled";
- };
-
- main_gpio_intr: interrupt-controller@a00000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x00a00000 0x00 0x800>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <3>;
- ti,interrupt-ranges = <0 32 16>;
- status = "disabled";
- };
-
- main_gpio0: gpio@600000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x00600000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <190>, <191>, <192>,
- <193>, <194>, <195>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <92>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 77 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- main_gpio1: gpio@601000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x00601000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <180>, <181>, <182>,
- <183>, <184>, <185>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <52>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 78 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- sdhci0: mmc@fa10000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
- clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 6>;
- assigned-clock-parents = <&k3_clks 57 8>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-hs200 = <0x6>;
- status = "disabled";
- };
-
- sdhci1: mmc@fa00000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0xf>;
- ti,otap-del-sel-sdr25 = <0xf>;
- ti,otap-del-sel-sdr50 = <0xc>;
- ti,otap-del-sel-sdr104 = <0x6>;
- ti,otap-del-sel-ddr50 = <0x9>;
- ti,itap-del-sel-legacy = <0x0>;
- ti,itap-del-sel-sd-hs = <0x0>;
- ti,itap-del-sel-sdr12 = <0x0>;
- ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
- status = "disabled";
- };
-
- sdhci2: mmc@fa20000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0xf>;
- ti,otap-del-sel-sdr25 = <0xf>;
- ti,otap-del-sel-sdr50 = <0xc>;
- ti,otap-del-sel-sdr104 = <0x6>;
- ti,otap-del-sel-ddr50 = <0x9>;
- ti,itap-del-sel-legacy = <0x0>;
- ti,itap-del-sel-sd-hs = <0x0>;
- ti,itap-del-sel-sdr12 = <0x0>;
- ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
- status = "disabled";
- };
-
- usbss0: dwc3-usb@f900000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f900000 0x00 0x800>;
- clocks = <&k3_clks 161 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb0: usb@31000000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31000000 0x00 0x50000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /*
irq.0 */
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /*
irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
- usbss1: dwc3-usb@f910000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>;
- clocks = <&k3_clks 162 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb1: usb@31100000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31100000 0x00 0x50000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /*
irq.0 */
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /*
irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
- fss: bus@fc00000 {
- compatible = "simple-bus";
- reg = <0x00 0x0fc00000 0x00 0x70000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- ospi0: spi@fc40000 {
- compatible = "ti,am654-ospi", "cdns,qspi-nor";
- reg = <0x00 0x0fc40000 0x00 0x100>,
- <0x05 0x00000000 0x01 0x00000000>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x0>;
- clocks = <&k3_clks 75 7>;
- assigned-clocks = <&k3_clks 75 7>;
- assigned-clock-parents = <&k3_clks 75 8>;
- assigned-clock-rates = <166666666>;
- power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- cpsw3g: ethernet@8000000 {
- compatible = "ti,am642-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x0 0x8000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
- clocks = <&k3_clks 13 0>;
- assigned-clocks = <&k3_clks 13 3>;
- assigned-clock-parents = <&k3_clks 13 11>;
- clock-names = "fck";
- power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
-
- dmas = <&main_pktdma 0xc600 15>,
- <&main_pktdma 0xc601 15>,
- <&main_pktdma 0xc602 15>,
- <&main_pktdma 0xc603 15>,
- <&main_pktdma 0xc604 15>,
- <&main_pktdma 0xc605 15>,
- <&main_pktdma 0xc606 15>,
- <&main_pktdma 0xc607 15>,
- <&main_pktdma 0x4600 15>;
- dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
- "tx7", "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
- reg = <1>;
- ti,mac-only;
- label = "port1";
- phys = <&phy_gmii_sel 1>;
- mac-address = [00 00 00 00 00 00];
- ti,syscon-efuse = <&wkup_conf 0x200>;
- };
-
- cpsw_port2: port@2 {
- reg = <2>;
- ti,mac-only;
- label = "port2";
- phys = <&phy_gmii_sel 2>;
- mac-address = [00 00 00 00 00 00];
- };
- };
-
- cpsw3g_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x0 0xf00 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 13 0>;
- clock-names = "fck";
- bus_freq = <1000000>;
- };
-
- cpts@3d000 {
- compatible = "ti,j721e-cpts";
- reg = <0x0 0x3d000 0x0 0x400>;
- clocks = <&k3_clks 13 3>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 102
IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
- };
- };
-
- hwspinlock: spinlock@2a000000 {
- compatible = "ti,am64-hwspinlock";
- reg = <0x00 0x2a000000 0x00 0x1000>;
- #hwlock-cells = <1>;
- };
-
- mailbox0_cluster0: mailbox@29000000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29000000 0x00 0x200>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster1: mailbox@29010000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29010000 0x00 0x200>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster2: mailbox@29020000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29020000 0x00 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster3: mailbox@29030000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29030000 0x00 0x200>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x20701000 0x00 0x200>,
- <0x00 0x20708000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
- clock-names = "hclk", "cclk";
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- main_rti0: watchdog@e000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e000000 0x00 0x100>;
- clocks = <&k3_clks 125 0>;
- power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 125 0>;
- assigned-clock-parents = <&k3_clks 125 2>;
- };
-
- main_rti1: watchdog@e010000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e010000 0x00 0x100>;
- clocks = <&k3_clks 126 0>;
- power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 126 0>;
- assigned-clock-parents = <&k3_clks 126 2>;
- };
-
- main_rti2: watchdog@e020000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e020000 0x00 0x100>;
- clocks = <&k3_clks 127 0>;
- power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 127 0>;
- assigned-clock-parents = <&k3_clks 127 2>;
- };
-
- main_rti3: watchdog@e030000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e030000 0x00 0x100>;
- clocks = <&k3_clks 128 0>;
- power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 128 0>;
- assigned-clock-parents = <&k3_clks 128 2>;
- };
-
- main_rti4: watchdog@e040000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e040000 0x00 0x100>;
- clocks = <&k3_clks 205 0>;
- power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 205 0>;
- assigned-clock-parents = <&k3_clks 205 2>;
- };
-
- epwm0: pwm@23000000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23000000 0x00 0x100>;
- power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm1: pwm@23010000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23010000 0x00 0x100>;
- power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm2: pwm@23020000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23020000 0x00 0x100>;
- power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ecap0: pwm@23100000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23100000 0x00 0x100>;
- power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 51 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap1: pwm@23110000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23110000 0x00 0x100>;
- power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 52 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap2: pwm@23120000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23120000 0x00 0x100>;
- power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 53 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- mcasp0: audio-controller@2b00000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b00000 0x00 0x2000>,
- <0x00 0x02b08000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 190 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 190 0>;
- assigned-clock-parents = <&k3_clks 190 2>;
- power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp1: audio-controller@2b10000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b10000 0x00 0x2000>,
- <0x00 0x02b18000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 191 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 191 0>;
- assigned-clock-parents = <&k3_clks 191 2>;
- power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp2: audio-controller@2b20000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b20000 0x00 0x2000>,
- <0x00 0x02b28000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 192 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 192 0>;
- assigned-clock-parents = <&k3_clks 192 2>;
- power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- ti_csi2rx0: ticsi2rx@30102000 {
- compatible = "ti,j721e-csi2rx-shim";
- dmas = <&main_bcdma_csi 0 0x5000 0>;
- dma-names = "rx0";
- reg = <0x00 0x30102000 0x00 0x1000>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- cdns_csi2rx0: csi-bridge@30101000 {
- compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
- reg = <0x00 0x30101000 0x00 0x1000>;
- clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks
182 0>,
- <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks
182 4>;
- clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
- "pixel_if1_clk", "pixel_if2_clk",
"pixel_if3_clk";
- phys = <&dphy0>;
- phy-names = "dphy";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- csi0_port0: port@0 {
- reg = <0>;
- status = "disabled";
- };
-
- csi0_port1: port@1 {
- reg = <1>;
- status = "disabled";
- };
-
- csi0_port2: port@2 {
- reg = <2>;
- status = "disabled";
- };
-
- csi0_port3: port@3 {
- reg = <3>;
- status = "disabled";
- };
-
- csi0_port4: port@4 {
- reg = <4>;
- status = "disabled";
- };
- };
- };
- };
-
- dphy0: phy@30110000 {
- compatible = "cdns,dphy-rx";
- reg = <0x00 0x30110000 0x00 0x1100>;
- #phy-cells = <0>;
- power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- dss: dss@30200000 {
- compatible = "ti,am62a7-dss";
- reg = <0x00 0x30200000 0x00 0x1000>, /* common */
- <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
- <0x00 0x30206000 0x00 0x1000>, /* vid */
- <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
- <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
- <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the
SoC */
- <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
- <0x00 0x30201000 0x00 0x1000>; /* common1 */
- reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2", "common1";
- power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 186 6>,
- <&k3_clks 186 0>,
- <&k3_clks 186 2>;
- clock-names = "fck", "vp1", "vp2";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
- dss_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
diff --git a/arch/arm/dts/k3-am62a-mcu.dtsi b/arch/arm/dts/k3-am62a-mcu.dtsi
deleted file mode 100644
index 8c36e56f4138..000000000000
--- a/arch/arm/dts/k3-am62a-mcu.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC Family MCU Domain peripherals
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_mcu {
- mcu_pmx0: pinctrl@4084000 {
- compatible = "pinctrl-single";
- reg = <0x00 0x04084000 0x00 0x88>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- status = "disabled";
- };
-
- /*
- * The MCU domain timer interrupts are routed only to the ESM module,
- * and not currently available for Linux. The MCU domain timers are
- * of limited use without interrupts, and likely reserved by the ESM.
- */
- mcu_timer0: timer@4800000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4800000 0x00 0x400>;
- clocks = <&k3_clks 35 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer1: timer@4810000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4810000 0x00 0x400>;
- clocks = <&k3_clks 48 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer2: timer@4820000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4820000 0x00 0x400>;
- clocks = <&k3_clks 49 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer3: timer@4830000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4830000 0x00 0x400>;
- clocks = <&k3_clks 50 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_uart0: serial@4a00000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x04a00000 0x00 0x100>;
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 149 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- mcu_i2c0: i2c@4900000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x04900000 0x00 0x100>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 106 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- mcu_spi0: spi@4b00000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x04b00000 0x00 0x400>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 147 0>;
- status = "disabled";
- };
-
- mcu_spi1: spi@4b10000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x04b10000 0x00 0x400>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 148 0>;
- status = "disabled";
- };
-
- mcu_gpio_intr: interrupt-controller@4210000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x04210000 0x00 0x200>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <5>;
- ti,interrupt-ranges = <0 104 4>;
- };
-
- mcu_gpio0: gpio@4201000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x04201000 0x00 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&mcu_gpio_intr>;
- interrupts = <30>, <31>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <24>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 79 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- mcu_rti0: watchdog@4880000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x04880000 0x00 0x100>;
- clocks = <&k3_clks 131 0>;
- power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 131 0>;
- assigned-clock-parents = <&k3_clks 131 2>;
- /* Tightly coupled to M4F */
- status = "reserved";
- };
-
- mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e08000 0x00 0x200>,
- <0x00 0x4e00000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e18000 0x00 0x200>,
- <0x00 0x4e10000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-};
diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi
b/arch/arm/dts/k3-am62a-sk-binman.dtsi
index ec3bf7ce913b..6ccc8b5834cb 100644
--- a/arch/arm/dts/k3-am62a-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi
@@ -144,7 +144,7 @@
#ifdef CONFIG_TARGET_AM62A7_A53_EVM
-#define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb"
+#define SPL_AM62A7_SK_DTB "spl/dts/ti/k3-am62a7-sk.dtb"
#define AM62A7_SK_DTB "u-boot.dtb"
&binman {
diff --git a/arch/arm/dts/k3-am62a-thermal.dtsi
b/arch/arm/dts/k3-am62a-thermal.dtsi
deleted file mode 100644
index c7486fb2a5b4..000000000000
--- a/arch/arm/dts/k3-am62a-thermal.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-thermal_zones: thermal-zones {
- main0_thermal: main0-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 0>;
-
- trips {
- main0_crit: main0-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-
- main1_thermal: main1-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 1>;
-
- trips {
- main1_crit: main1-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-
- main2_thermal: main2-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 2>;
-
- trips {
- main2_crit: main2-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-};
diff --git a/arch/arm/dts/k3-am62a-wakeup.dtsi
b/arch/arm/dts/k3-am62a-wakeup.dtsi
deleted file mode 100644
index f7bec484705a..000000000000
--- a/arch/arm/dts/k3-am62a-wakeup.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_wakeup {
- wkup_conf: syscon@43000000 {
- compatible = "ti,j721e-system-controller", "syscon",
"simple-mfd";
- reg = <0x00 0x43000000 0x00 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00 0x00 0x43000000 0x20000>;
-
- chipid: chipid@14 {
- compatible = "ti,am654-chipid";
- reg = <0x14 0x4>;
- };
- };
-
- wkup_uart0: serial@2b300000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x2b300000 0x00 0x100>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 114 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- wkup_i2c0: i2c@2b200000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x2b200000 0x00 0x100>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 107 4>;
- clock-names = "fck";
- status = "disabled";
- };
-
- wkup_rtc0: rtc@2b1f0000 {
- compatible = "ti,am62-rtc";
- reg = <0x00 0x2b1f0000 0x00 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
- clock-names = "vbus", "osc32k";
- power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
- wakeup-source;
- status = "disabled";
- };
-
- wkup_rti0: watchdog@2b000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x2b000000 0x00 0x100>;
- clocks = <&k3_clks 132 0>;
- power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 132 0>;
- assigned-clock-parents = <&k3_clks 132 2>;
- /* Used by DM firmware */
- status = "reserved";
- };
-
- wkup_vtm0: temperature-sensor@b00000 {
- compatible = "ti,j7200-vtm";
- reg = <0x00 0xb00000 0x00 0x400>,
- <0x00 0xb01000 0x00 0x400>;
- power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/arch/arm/dts/k3-am62a.dtsi b/arch/arm/dts/k3-am62a.dtsi
deleted file mode 100644
index b1b884600293..000000000000
--- a/arch/arm/dts/k3-am62a.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/ti,sci_pm_domain.h>
-
-#include "k3-pinctrl.h"
-
-/ {
- model = "Texas Instruments K3 AM62A SoC";
- compatible = "ti,am62a7";
- interrupt-parent = <&gic500>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- firmware {
- optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- };
-
- psci: psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
- };
-
- a53_timer0: timer-cl0-cpu0 {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cbass_main: bus@f0000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
-
- ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /*
Main MMRs */
- <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /*
ESM0 */
- <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /*
GPIO */
- <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /*
USB0 debug trace */
- <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /*
USB1 debug trace */
- <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /*
Timesync router */
- <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /*
First peripheral window */
- <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /*
Main CPSW */
- <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /*
Second peripheral window */
- <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /*
GPU */
- <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /*
Third peripheral window */
- <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /*
PRUSS-M */
- <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /*
CSI window */
- <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /*
DSS */
- <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /*
VPU */
- <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /*
USB0 DWC3 Core window */
- <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /*
USB1 DWC3 Core window */
- <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /*
SA3UL */
- <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /*
SA3 sproxy data */
- <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /*
TI SCI DEBUG */
- <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /*
SA3 sproxy config */
- <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /*
DMSS */
- <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /*
FSS0 DAT1 */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /*
OCSRAM */
- <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /*
C7x_0 */
- <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /*
A53 PERIPHBASE */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /*
FSS0 DAT3 */
-
- /* MCU Domain Range */
- <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
- <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /*
MCU R5 ATCM */
- <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /*
MCU R5 BTCM */
- <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /*
MCU R5 IRAM0 */
- <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /*
MCU R5 IRAM1 */
-
- /* Wakeup Domain Range */
- <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
- <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
- <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
- <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /*
DM R5 ATCM */
- <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /*
DM R5 BTCM */
-
- cbass_mcu: bus@4000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x04000000 0x00 0x04000000 0x00
0x01ff1400>, /* Peripheral window */
- <0x00 0x79000000 0x00 0x79000000 0x00
0x00008000>, /* MCU R5 ATCM */
- <0x00 0x79020000 0x00 0x79020000 0x00
0x00008000>, /* MCU R5 BTCM */
- <0x00 0x79100000 0x00 0x79100000 0x00
0x00040000>, /* MCU IRAM0 */
- <0x00 0x79140000 0x00 0x79140000 0x00
0x00040000>; /* MCU IRAM1 */
- };
-
- cbass_wakeup: bus@b00000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00
0x00002400>, /* VTM */
- <0x00 0x2b000000 0x00 0x2b000000 0x00
0x00300400>, /* Peripheral Window */
- <0x00 0x43000000 0x00 0x43000000 0x00
0x00020000>, /* WKUP CTRL MMR */
- <0x00 0x78000000 0x00 0x78000000 0x00
0x00008000>, /* DM R5 ATCM*/
- <0x00 0x78100000 0x00 0x78100000 0x00
0x00008000>; /* DM R5 BTCM*/
- };
- };
-
- #include "k3-am62a-thermal.dtsi"
-};
-
-/* Now include the peripherals for each bus segments */
-#include "k3-am62a-main.dtsi"
-#include "k3-am62a-mcu.dtsi"
-#include "k3-am62a-wakeup.dtsi"
diff --git a/arch/arm/dts/k3-am62a7-sk.dts b/arch/arm/dts/k3-am62a7-sk.dts
deleted file mode 100644
index f241637a5642..000000000000
--- a/arch/arm/dts/k3-am62a7-sk.dts
+++ /dev/null
@@ -1,702 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * AM62A SK: https://www.ti.com/lit/zip/sprr459
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am62a7.dtsi"
-
-/ {
- compatible = "ti,am62a7-sk", "ti,am62a7";
- model = "Texas Instruments AM62A7 SK";
-
- aliases {
- serial0 = &wkup_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory@80000000 {
- device_type = "memory";
- /* 4G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
- <0x00000008 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- secure_tfa_ddr: tfa@9e780000 {
- reg = <0x00 0x9e780000 0x00 0x80000>;
- alignment = <0x1000>;
- no-map;
- };
-
- secure_ddr: optee@9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE
*/
- alignment = <0x1000>;
- no-map;
- };
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
- };
-
- vmain_pd: regulator-0 {
- /* TPS25750 PD CONTROLLER OUTPUT */
- compatible = "regulator-fixed";
- regulator-name = "vmain_pd";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_5v0: regulator-1 {
- /* Output of TPS63070 */
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_3v3_main: regulator-2 {
- /* output of LM5141-Q1 */
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_main";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_mmc1: regulator-3 {
- /* TPS22918DBVR */
- compatible = "regulator-fixed";
- regulator-name = "vdd_mmc1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
- };
-
- vcc_3v3_sys: regulator-4 {
- /* output of TPS222965DSGT */
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_main>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&usr_led_pins_default>;
-
- led-0 {
- label = "am62a-sk:green:heartbeat";
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- default-state = "off";
- };
- };
-
- tlv320_mclk: clk-0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <12288000>;
- };
-
- hdmi0: connector-hdmi {
- compatible = "hdmi-connector";
- label = "hdmi";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&sii9022_out>;
- };
- };
- };
-
- codec_audio: sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "AM62Ax-SKEVM";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Line", "Line In",
- "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "LINE1L", "Line In",
- "LINE1R", "Line In",
- "MIC3R", "Microphone Jack",
- "Microphone Jack", "Mic Bias";
- simple-audio-card,format = "dsp_b";
- simple-audio-card,bitclock-master = <&sound_master>;
- simple-audio-card,frame-master = <&sound_master>;
- simple-audio-card,bitclock-inversion;
-
- simple-audio-card,cpu {
- sound-dai = <&mcasp1>;
- };
-
- sound_master: simple-audio-card,codec {
- sound-dai = <&tlv320aic3106>;
- clocks = <&tlv320_mclk>;
- };
- };
-};
-
-&mcu_pmx0 {
- wkup_uart0_pins_default: wkup-uart0-default-pins {
- pinctrl-single,pins = <
- AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9)
WKUP_UART0_RXD */
- AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9)
WKUP_UART0_TXD */
- AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10)
WKUP_UART0_CTSn */
- AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8)
WKUP_UART0_RTSn */
- >;
- };
-};
-
-/* WKUP UART0 is used for DM firmware logs */
-&wkup_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
- status = "reserved";
-};
-
-&main_pmx0 {
- main_dss0_pins_default: main-dss0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC
*/
- AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC
*/
- AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK
*/
- AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */
- AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0
*/
- AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1
*/
- AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2
*/
- AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3
*/
- AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4
*/
- AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5
*/
- AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6
*/
- AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7
*/
- AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8
*/
- AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9
*/
- AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22)
VOUT0_DATA10 */
- AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21)
VOUT0_DATA11 */
- AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20)
VOUT0_DATA12 */
- AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19)
VOUT0_DATA13 */
- AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21)
VOUT0_DATA14 */
- AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22)
VOUT0_DATA15 */
- AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22)
GPMC0_AD8.VOUT0_DATA16 */
- AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19)
GPMC0_AD9.VOUT0_DATA17 */
- AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20)
GPMC0_AD10.VOUT0_DATA18 */
- AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22)
GPMC0_AD11.VOUT0_DATA19 */
- AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22)
GPMC0_AD12.VOUT0_DATA20 */
- AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21)
GPMC0_AD13.VOUT0_DATA21 */
- AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20)
GPMC0_AD14.VOUT0_DATA22 */
- AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21)
GPMC0_AD15.VOUT0_DATA23 */
- >;
- };
-
- main_uart0_pins_default: main-uart0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
- AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
- >;
- };
-
- main_uart1_pins_default: main-uart1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17)
I2C1_SCL.UART1_RXD */
- AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17)
I2C1_SDA.UART1_TXD */
- AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19)
MCASP0_AXR3.UART1_CTSn */
- AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19)
MCASP0_AXR2.UART1_RTSn */
- >;
- };
-
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16)
I2C0_SCL */
- AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16)
I2C0_SDA */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17)
I2C1_SCL */
- AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17)
I2C1_SDA */
- >;
- };
-
- main_i2c2_pins_default: main-i2c2-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22)
GPMC0_CSn2.I2C2_SCL */
- AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24)
GPMC0_CSn3.I2C2_SDA */
- >;
- };
-
- main_mmc0_pins_default: main-mmc0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
- AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
- AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
- AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
- AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1)
MMC0_DAT1 */
- AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3)
MMC0_DAT2 */
- AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4)
MMC0_DAT3 */
- AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2)
MMC0_DAT4 */
- AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1)
MMC0_DAT5 */
- AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2)
MMC0_DAT6 */
- AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2)
MMC0_DAT7 */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
- AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
- AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
- AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
- AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
- AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
- AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
- >;
- };
-
- usr_led_pins_default: usr-led-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18)
MMC1_SDWP.GPIO1_49 */
- >;
- };
-
- main_usb1_pins_default: main-usb1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18)
USB1_DRVVBUS */
- >;
- };
-
- main_mdio1_pins_default: main-mdio1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
- AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
- >;
- };
-
- main_rgmii1_pins_default: main-rgmii1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0
*/
- AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
- AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
- AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
- AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC
*/
- AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15)
RGMII1_RX_CTL */
- AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
- AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
- AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
- AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3
*/
- AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC
*/
- AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16)
RGMII1_TX_CTL */
- >;
- };
-
- main_mcasp1_pins_default: main-mcasp1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19)
GPMC0_BE0n_CLE.MCASP1_ACLKX */
- AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18)
GPMC0_WAIT0.MCASP1_AFSX */
- AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19)
GPMC0_WEn.MCASP1_AXR0 */
- AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18)
GPMC0_ADVn_ALE.MCASP1_AXR2 */
- >;
- };
-
- main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15)
UART0_RTSn.GPIO1_23 */
- >;
- };
-};
-
-&mcu_pmx0 {
- status = "okay";
-
- pmic_irq_pins_default: pmic-irq-default-pins {
- pinctrl-single,pins = <
- AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11)
MCU_GPIO0_0 */
- >;
- };
-};
-
-&mcu_gpio0 {
- status = "okay";
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- typec_pd0: usb-power-controller@3f {
- compatible = "ti,tps6598x";
- reg = <0x3f>;
-
- connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- self-powered;
- data-role = "dual";
- power-role = "sink";
- port {
- usb_con_hs: endpoint {
- remote-endpoint = <&usb0_hs_ep>;
- };
- };
- };
- };
-
- tps659312: pmic@48 {
- compatible = "ti,tps6593-q1";
- reg = <0x48>;
- ti,primary-pmic;
- system-power-controller;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins_default>;
- interrupt-parent = <&mcu_gpio0>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
- buck123-supply = <&vcc_3v3_sys>;
- buck4-supply = <&vcc_3v3_sys>;
- buck5-supply = <&vcc_3v3_sys>;
- ldo1-supply = <&vcc_3v3_sys>;
- ldo2-supply = <&vcc_3v3_sys>;
- ldo3-supply = <&buck5>;
- ldo4-supply = <&vcc_3v3_sys>;
-
- regulators {
- buck123: buck123 {
- regulator-name = "vcc_core";
- regulator-min-microvolt = <715000>;
- regulator-max-microvolt = <895000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4: buck4 {
- regulator-name = "vcc_1v1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: buck5 {
- regulator-name = "vcc_1v8_sys";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: ldo1 {
- regulator-name = "vddshv5_sdio";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2: ldo2 {
- regulator-name = "vpp_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3: ldo3 {
- regulator-name = "vcc_0v85";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: ldo4 {
- regulator-name = "vdda_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <100000>;
-
- exp1: gpio@22 {
- compatible = "ti,tca6424";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio1>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
-
- gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
- "BT_EN_SOC", "MMC1_SD_EN",
- "VPP_EN", "EXP_PS_3V3_En",
- "EXP_PS_5V0_En", "EXP_HAT_DETECT",
- "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
- "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
- "GPIO_HDMI_RSTn", "CSI_GPIO0",
- "CSI_GPIO1", "WLAN_ALERTn",
- "HDMI_INTn", "TEST_GPIO2",
- "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
- "MCASP1_FET_SEL", "UART1_FET_SEL",
- "PD_I2C_IRQ", "IO_EXP_TEST_LED";
- };
-
- tlv320aic3106: audio-codec@1b {
- #sound-dai-cells = <0>;
- compatible = "ti,tlv320aic3106";
- reg = <0x1b>;
- ai3x-micbias-vg = <1>; /* 2.0V */
-
- /* Regulators */
- AVDD-supply = <&vcc_3v3_sys>;
- IOVDD-supply = <&vcc_3v3_sys>;
- DRVDD-supply = <&vcc_3v3_sys>;
- DVDD-supply = <&buck5>;
- };
-
- exp2: gpio@23 {
- compatible = "ti,tca6424";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio-line-names = "", "",
- "", "",
- "", "",
- "", "",
- "WL_LT_EN", "CSI_RSTz",
- "", "",
- "", "",
- "", "",
- "SPI0_FET_SEL", "SPI0_FET_OE",
- "RGMII2_BRD_CONN_DET", "CSI_SEL2",
- "CSI_EN", "AUTO_100M_1000M_CONFIG",
- "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
- };
-
- sii9022: bridge-hdmi@3b {
- compatible = "sil,sii9022";
- reg = <0x3b>;
- interrupt-parent = <&exp1>;
- interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
- #sound-dai-cells = <0>;
- sil,i2s-data-lanes = < 0 >;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- sii9022_in: endpoint {
- remote-endpoint = <&dpi1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- sii9022_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-};
-
-&main_i2c2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c2_pins_default>;
- clock-frequency = <400000>;
-};
-
-&sdhci0 {
- /* eMMC */
- status = "okay";
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- disable-wp;
-};
-
-&sdhci1 {
- /* SD/MMC */
- status = "okay";
- vmmc-supply = <&vdd_mmc1>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- disable-wp;
-};
-
-&main_gpio0 {
- status = "okay";
-};
-
-&main_gpio1 {
- status = "okay";
-};
-
-&main_gpio_intr {
- status = "okay";
-};
-
-&main_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-/* Main UART1 is used for TIFS firmware logs */
-&main_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart1_pins_default>;
- status = "reserved";
-};
-
-&usbss0 {
- status = "okay";
- ti,vbus-divider;
-};
-
-&usb0 {
- usb-role-switch;
-
- port {
- usb0_hs_ep: endpoint {
- remote-endpoint = <&usb_con_hs>;
- };
- };
-};
-
-&usbss1 {
- status = "okay";
-};
-
-&usb1 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&main_usb1_pins_default>;
-};
-
-&cpsw3g {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default>;
-};
-
-&cpsw_port1 {
- status = "okay";
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- status = "disabled";
-};
-
-&cpsw3g_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mdio1_pins_default>;
-
- cpsw3g_phy0: ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,min-output-impedance;
- };
-};
-
-&mcasp1 {
- status = "okay";
- #sound-dai-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&main_mcasp1_pins_default>;
-
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
-
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 0 2 0
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-&dss {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_dss0_pins_default>;
-};
-
-&dss_ports {
- /* VP2: DPI Output */
- port@1 {
- reg = <1>;
-
- dpi1_out: endpoint {
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig
index 6b29a4b9cff5..2a71b06310f1 100644
--- a/configs/am62ax_evm_a53_defconfig
+++ b/configs/am62ax_evm_a53_defconfig
@@ -8,7 +8,7 @@ CONFIG_SOC_K3_AM62A7=y
CONFIG_TARGET_AM62A7_A53_EVM=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
-CONFIG_DEFAULT_DEVICE_TREE="k3-am62a7-sk"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -39,6 +39,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_MMC=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
--
2.43.0
