- Change the spi-max-frequency to 50000000 (50 Mhz). According to the data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in the DTS to ensure u-boot is consistent with what Linux kernel expected. - Update GPIO fan to conform to the latest DT binding.
[1] MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf Signed-off-by: Tony Dinh <mibo...@gmail.com> --- arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts index 253cf01130..fdaa444e51 100644 --- a/arch/arm/dts/armada-385-thecus-n2350.dts +++ b/arch/arm/dts/armada-385-thecus-n2350.dts @@ -2,7 +2,7 @@ /* * Device Tree file for Thecus N2350 board * - * Copyright (C) 2018-2023 Tony Dinh <mibo...@gmail.com> + * Copyright (C) 2018-2024 Tony Dinh <mibo...@gmail.com> * Copyright (C) 2018 Manuel Jung <manuel.j...@hotmail.com> */ @@ -143,9 +143,9 @@ fan { compatible = "gpio-fan"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 600 1 - 3000 2 >; + gpio-fan,speed-map = < 0 0>, + <600 1>, + <3000 2 >; pinctrl-0 = <&pmx_fan>; pinctrl-names = "default"; }; @@ -415,7 +415,7 @@ compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <108000000>; + spi-max-frequency = <50000000>; spi-cpha; partition@0 { -- 2.39.2