Hi, 2011/4/14 Simon Glass <s...@chromium.org>: > Built-in Ethernet adapters support setting the mac address by means of a > ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr). > > This adds similar support to the USB network side, using the names > usbethaddr, usbeth1addr, etc. They are kept separate since we don't want > a USB device taking the MAC address of a built-in device or vice versa. > > TEST=build, test on harmony, with setenv usbethaddr c0:c1:c0:13:0b:b8, bootp, > tftp ... > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > board/davinci/common/misc.c | 2 +- > drivers/net/designware.c | 2 +- > drivers/usb/eth/usb_ether.c | 9 ++++- > include/net.h | 25 ++++++++++++++++- > net/eth.c | 65 ++++++++++++++++++++++++++----------------
3 subsystems within 1 single patch (net + usb + davinci-boards). How are we gonna deal with it? Since the remainder of the series is USB tree related, I would suggest to include it in the u-boot-usb tree, but then I need the Ack of Ben and Sandeep. Kind regards, Remy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot