From: Quentin Schulz <quentin.sch...@cherry.de> USB gadget simply doesn't work right now on PX30. Tested on PX30 EVB and PX30 Ringneck with Linux mainline and Rockchip 5.10 Linux as well as U-Boot.
We don't want to our users to assume that USB gadget is supported on Q7 USB P1 on Ringneck Haikou, so let's remove its support, which also removes the ums CLI command, fastboot and Android image booting support. Signed-off-by: Quentin Schulz <quentin.sch...@cherry.de> --- configs/ringneck-px30_defconfig | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index 23204794205..2ec5f72e47a 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -15,7 +15,6 @@ CONFIG_DEBUG_UART_BASE=0xFF030000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y -# CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -42,6 +41,7 @@ CONFIG_SPL_ATF=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set +CONFIG_CMD_BIND=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y @@ -49,7 +49,6 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y @@ -73,8 +72,6 @@ CONFIG_BUTTON=y CONFIG_BUTTON_GPIO=y CONFIG_CLK=y CONFIG_SPL_CLK=y -CONFIG_FASTBOOT_BUF_ADDR=0x800800 -CONFIG_FASTBOOT_BUF_SIZE=0x04000000 CONFIG_GPIO_HOG=y CONFIG_SPL_GPIO_HOG=y CONFIG_ROCKCHIP_GPIO=y @@ -112,8 +109,6 @@ CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_SPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y CONFIG_LZO=y -- 2.45.2
