The Asus Eee Pad Transformer family are 2-in-1 detachable/slider
tablets developed by Asus that run the Android operating system.
The Eee Pad Transformers feature a 10.1-inch (260 mm) display,
an Nvidia Tegra 2 dual-core chip, 1 GB of RAM, and 16/32 GB of storage.
Transformers board derives from Nvidia Ventana development board.
This patch brings support for all 3 known T20 Transformers:
- Asus Eee Pad Transformer TF101
- Asus Eee Pad Transformer TF101G
- Asus Eee Pad Slider SL101
Tested-by: Robert Eckelmann <longnose...@gmail.com> # ASUS TF101
Tested-by: Antoni Aloy Torrens <aaloytorr...@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
---
arch/arm/dts/Makefile | 6 +-
arch/arm/dts/tegra20-asus-sl101.dts | 9 +
arch/arm/dts/tegra20-asus-tf101.dts | 9 +
arch/arm/dts/tegra20-asus-tf101g.dts | 9 +
arch/arm/dts/tegra20-asus-transformer.dtsi | 545 ++++++++++++++++++
arch/arm/mach-tegra/tegra20/Kconfig | 5 +
board/asus/transformer-t20/Kconfig | 12 +
board/asus/transformer-t20/MAINTAINERS | 8 +
board/asus/transformer-t20/Makefile | 9 +
.../asus/transformer-t20/configs/sl101.config | 1 +
.../asus/transformer-t20/configs/tf101.config | 1 +
.../transformer-t20/configs/tf101g.config | 1 +
board/asus/transformer-t20/transformer-t20.c | 57 ++
configs/transformer_t20_defconfig | 82 +++
doc/board/asus/index.rst | 1 +
doc/board/asus/transformer_t20.rst | 129 +++++
include/configs/transformer-t20.h | 23 +
17 files changed, 906 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/tegra20-asus-sl101.dts
create mode 100644 arch/arm/dts/tegra20-asus-tf101.dts
create mode 100644 arch/arm/dts/tegra20-asus-tf101g.dts
create mode 100644 arch/arm/dts/tegra20-asus-transformer.dtsi
create mode 100644 board/asus/transformer-t20/Kconfig
create mode 100644 board/asus/transformer-t20/MAINTAINERS
create mode 100644 board/asus/transformer-t20/Makefile
create mode 100644 board/asus/transformer-t20/configs/sl101.config
create mode 100644 board/asus/transformer-t20/configs/tf101.config
create mode 100644 board/asus/transformer-t20/configs/tf101g.config
create mode 100644 board/asus/transformer-t20/transformer-t20.c
create mode 100644 configs/transformer_t20_defconfig
create mode 100644 doc/board/asus/transformer_t20.rst
create mode 100644 include/configs/transformer-t20.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8fb6a8a1f1..3a66c6d012 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -102,7 +102,11 @@ dtb-$(CONFIG_ARCH_S5P4418) += \
dtb-$(CONFIG_ARCH_MESON) += \
meson-a1-ad401.dtb
-dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+dtb-$(CONFIG_ARCH_TEGRA) += \
+ tegra20-asus-sl101.dtb \
+ tegra20-asus-tf101.dtb \
+ tegra20-asus-tf101g.dtb \
+ tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
diff --git a/arch/arm/dts/tegra20-asus-sl101.dts
b/arch/arm/dts/tegra20-asus-sl101.dts
new file mode 100644
index 0000000000..b4709c3e9a
--- /dev/null
+++ b/arch/arm/dts/tegra20-asus-sl101.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS EeePad Slider SL101";
+ compatible = "asus,sl101", "nvidia,tegra20";
+};
diff --git a/arch/arm/dts/tegra20-asus-tf101.dts
b/arch/arm/dts/tegra20-asus-tf101.dts
new file mode 100644
index 0000000000..7c734fb5b1
--- /dev/null
+++ b/arch/arm/dts/tegra20-asus-tf101.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS EeePad Transformer TF101";
+ compatible = "asus,tf101", "nvidia,tegra20";
+};
diff --git a/arch/arm/dts/tegra20-asus-tf101g.dts
b/arch/arm/dts/tegra20-asus-tf101g.dts
new file mode 100644
index 0000000000..f49a358a26
--- /dev/null
+++ b/arch/arm/dts/tegra20-asus-tf101g.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS EeePad Transformer TF101G";
+ compatible = "asus,tf101g", "nvidia,tegra20";
+};
diff --git a/arch/arm/dts/tegra20-asus-transformer.dtsi
b/arch/arm/dts/tegra20-asus-transformer.dtsi
new file mode 100644
index 0000000000..49efabbfd9
--- /dev/null
+++ b/arch/arm/dts/tegra20-asus-transformer.dtsi
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uartd;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* MicroSD */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ usb0 = &usb1;
+ usb1 = &usb3; /* Dock USB */
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
+ pinmux@70000014 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "spia",
+ "spib", "spic";
+ nvidia,function = "gmi";
+ };
+
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ };
+
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+
+ dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+ nvidia,function = "vi";
+ };
+
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+
+ gmd {
+ nvidia,pins = "gmd";
+ nvidia,function = "sflash";
+ };
+
+ gpu {
+ nvidia,pins = "gpu";
+ nvidia,function = "pwm";
+ };
+
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+
+ gpv {
+ nvidia,pins = "gpv", "slxa";
+ nvidia,function = "pcie";
+ };
+
+ hdint {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ };
+
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uartb";
+ };
+
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+
+ lcsn {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+ "lsdi", "lvp0";
+ nvidia,function = "rsvd4";
+ };
+
+ ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lpp", "lpw0",
+ "lpw2", "lsc0", "lsc1", "lsck", "lsda",
+ "lspi", "lvp1", "lvs";
+ nvidia,function = "displaya";
+ };
+
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd", "slxc",
"slxk";
+ nvidia,function = "sdio3";
+ };
+
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+
+ slxd {
+ nvidia,pins = "slxd";
+ nvidia,function = "spdif";
+ };
+
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "atd",
+ "cdev1", "cdev2", "dap1", "dap4",
+ "dte", "ddc", "dtf", "gma", "gmc",
+ "gme", "gpu", "gpu7", "gpv", "i2cp",
+ "irrx", "irtx", "pta", "rm", "sdc",
+ "sdd", "slxc", "slxd", "slxk", "spdi",
+ "spdo", "uac", "uad",
+ "uda", "csus";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf_ate {
+ nvidia,pins = "ate", "dap2", "dap3", "gmb",
"gmd",
+ "owc", "spia", "spib", "spic",
+ "spid", "spie", "spig", "slxa";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+
+ conf_crtp {
+ nvidia,pins = "crtp", "spih";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf_dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf_spif {
+ nvidia,pins = "spif";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf_hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsck", "lsda", "lsdi", "lvp0";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf_kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf", "sdio1", "uaa", "uab",
+ "uca", "ucb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf_lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ };
+
+ conf_ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+ "lvp1", "lvs", "pmc", "sdb";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ };
+
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1", "drive_ddc",
"drive_vi1";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode =
<TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising =
<TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling =
<TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+
+ drive_csus {
+ nvidia,pins = "drive_csus";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode =
<TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising =
<TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling =
<TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+ };
+
+ state_i2cmux_ddc: pinmux-i2cmux-ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_idle: pinmux-i2cmux-idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux-i2cmux-pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+ };
+
+ uartd: serial@70006300 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ pwr_i2c: i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ avdd_usb: ldo3 {
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcore_emmc: ldo5 {
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ };
+ };
+ };
+
+ /* USB via ASUS connector */
+ usb1: usb@c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ nvidia,xcvr-setup-use-fuses;
+ };
+
+ /* Dock's USB port */
+ usb3: usb@c5008000 {
+ status = "okay";
+ };
+
+ sdmmc3: sdhci@c8000400 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+
+ vmmc-supply = <&vdd_3v3_sys>;
+ vqmmc-supply = <&vdd_3v3_sys>;
+ };
+
+ sdmmc4: sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_3v3_sys>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_3v3_sys>;
+ pwms = <&pwm 2 4000000>;
+
+ brightness-levels = <1 35 70 105 140 175 210 255>;
+ default-brightness-level = <5>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k-in {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ switch-dock-hall-sensor {
+ label = "Lid sensor";
+ gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <SW_LID>;
+ };
+ };
+
+ panel: panel {
+ compatible = "simple-panel";
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+
+ display-timings {
+ timing@0 {
+ clock-frequency = <71200000>;
+
+ hactive = <1280>;
+ hfront-porch = <8>;
+ hback-porch = <18>;
+ hsync-len = <184>;
+
+ vactive = <800>;
+ vfront-porch = <4>;
+ vback-porch = <8>;
+ vsync-len = <3>;
+ };
+ };
+ };
+
+ vdd_3v3_sys: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_vs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_pnl_reg: regulator-pnl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
diff --git a/arch/arm/mach-tegra/tegra20/Kconfig
b/arch/arm/mach-tegra/tegra20/Kconfig
index 57d11024bf..6458827d6d 100644
--- a/arch/arm/mach-tegra/tegra20/Kconfig
+++ b/arch/arm/mach-tegra/tegra20/Kconfig
@@ -47,6 +47,10 @@ config TARGET_TEC
bool "Avionic Design Tamonten Evaluation Carrier"
select BOARD_LATE_INIT
+config TARGET_TRANSFORMER_T20
+ bool "Asus Tegra20 Transformer board"
+ select BOARD_LATE_INIT
+
config TARGET_TRIMSLICE
bool "Compulab TrimSlice board"
select BOARD_LATE_INIT
@@ -72,6 +76,7 @@ source "board/compal/paz00/Kconfig"
source "board/avionic-design/plutux/Kconfig"
source "board/nvidia/seaboard/Kconfig"
source "board/avionic-design/tec/Kconfig"
+source "board/asus/transformer-t20/Kconfig"
source "board/compulab/trimslice/Kconfig"
source "board/nvidia/ventana/Kconfig"
source "board/toradex/colibri_t20/Kconfig"
diff --git a/board/asus/transformer-t20/Kconfig
b/board/asus/transformer-t20/Kconfig
new file mode 100644
index 0000000000..d5fe412828
--- /dev/null
+++ b/board/asus/transformer-t20/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_TRANSFORMER_T20
+
+config SYS_BOARD
+ default "transformer-t20"
+
+config SYS_VENDOR
+ default "asus"
+
+config SYS_CONFIG_NAME
+ default "transformer-t20"
+
+endif
diff --git a/board/asus/transformer-t20/MAINTAINERS
b/board/asus/transformer-t20/MAINTAINERS
new file mode 100644
index 0000000000..7bf9357098
--- /dev/null
+++ b/board/asus/transformer-t20/MAINTAINERS
@@ -0,0 +1,8 @@
+TRANSFORMER T20 BOARD
+M: Svyatoslav Ryhel <clamo...@gmail.com>
+S: Maintained
+F: arch/arm/dts/tegra20-asus-*
+F: board/asus/transformer-t20/
+F: configs/transformer_t20_defconfig
+F: doc/board/asus/transformer_t20.rst
+F: include/configs/transformer-t20.h
diff --git a/board/asus/transformer-t20/Makefile
b/board/asus/transformer-t20/Makefile
new file mode 100644
index 0000000000..8522f82c2b
--- /dev/null
+++ b/board/asus/transformer-t20/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010,2011
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamo...@gmail.com>
+
+obj-y += transformer-t20.o
diff --git a/board/asus/transformer-t20/configs/sl101.config
b/board/asus/transformer-t20/configs/sl101.config
new file mode 100644
index 0000000000..4f639e1b41
--- /dev/null
+++ b/board/asus/transformer-t20/configs/sl101.config
@@ -0,0 +1 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-sl101"
diff --git a/board/asus/transformer-t20/configs/tf101.config
b/board/asus/transformer-t20/configs/tf101.config
new file mode 100644
index 0000000000..44a1d1a3c1
--- /dev/null
+++ b/board/asus/transformer-t20/configs/tf101.config
@@ -0,0 +1 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-tf101"
diff --git a/board/asus/transformer-t20/configs/tf101g.config
b/board/asus/transformer-t20/configs/tf101g.config
new file mode 100644
index 0000000000..0ccf2498cc
--- /dev/null
+++ b/board/asus/transformer-t20/configs/tf101g.config
@@ -0,0 +1 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-tf101g"
diff --git a/board/asus/transformer-t20/transformer-t20.c
b/board/asus/transformer-t20/transformer-t20.c
new file mode 100644
index 0000000000..42fc563a0b
--- /dev/null
+++ b/board/asus/transformer-t20/transformer-t20.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamo...@gmail.com>
+ */
+
+/* T20 Transformers derive from Ventana board */
+
+#include <dm.h>
+#include <i2c.h>
+#include <log.h>
+#include <linux/delay.h>
+
+#define TPS6586X_I2C_ADDRESS 0x34
+#define TPS6586X_SUPPLYENE 0x14
+#define EXITSLREQ_BIT BIT(1)
+#define SLEEP_MODE_BIT BIT(3)
+
+#ifdef CONFIG_CMD_POWEROFF
+int do_poweroff(struct cmd_tbl *cmdtp,
+ int flag, int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS6586X_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, TPS6586X_SUPPLYENE, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] &= ~EXITSLREQ_BIT;
+
+ ret = dm_i2c_write(dev, TPS6586X_SUPPLYENE, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= SLEEP_MODE_BIT;
+
+ ret = dm_i2c_write(dev, TPS6586X_SUPPLYENE, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif
diff --git a/configs/transformer_t20_defconfig
b/configs/transformer_t20_defconfig
new file mode 100644
index 0000000000..6f03d62135
--- /dev/null
+++ b/configs/transformer_t20_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x00110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-tf101"
+CONFIG_SPL_TEXT_BASE=0x00108000
+CONFIG_SPL_STACK=0xffffc
+CONFIG_TEGRA20=y
+CONFIG_TARGET_TRANSFORMER_T20=y
+CONFIG_TEGRA_ENABLE_UARTD=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x2000000
+CONFIG_BUTTON_CMD=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff"
+CONFIG_SYS_PBSIZE=2085
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
+CONFIG_SYS_PROMPT="Tegra20 (Transformer) # "
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x11000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="ASUS"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0b05
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4e0f
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+# CONFIG_VIDEO_BPP8 is not set
+CONFIG_VIDEO_TEGRA20=y
diff --git a/doc/board/asus/index.rst b/doc/board/asus/index.rst
index 87e535fe34..2b10328790 100644
--- a/doc/board/asus/index.rst
+++ b/doc/board/asus/index.rst
@@ -7,4 +7,5 @@ ASUS
:maxdepth: 2
grouper_common
+ transformer_t20
transformer_t30
diff --git a/doc/board/asus/transformer_t20.rst
b/doc/board/asus/transformer_t20.rst
new file mode 100644
index 0000000000..b5614b1092
--- /dev/null
+++ b/doc/board/asus/transformer_t20.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the ASUS Eee Pad Transformer device family
+=====================================================
+
+``DISCLAMER!`` Moving your ASUS Eee Pad Transformer/Slider to use U-Boot
+assumes replacement of the vendor ASUS bootloader. Vendor Android firmwares
+will no longer be able to run on the device. This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Process U-Boot
+- Flashing U-Boot into the eMMC
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+Device support is implemented by applying config fragment to a generic board
+defconfig. Valid fragments are ``tf101.config``, ``tf101g.config`` and
+``sl101.config``.
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make transformer_t20_defconfig tf101.config # For TF101
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for further processing.
+
+Process U-Boot
+--------------
+
+``DISCLAMER!`` All questions related to the re-crypt work should be asked
+in re-crypt repo issues. NOT HERE!
+
+re-crypt is a tool that processes the ``u-boot-dtb-tegra.bin`` binary into form
+usable by device. This process is required only on the first installation or
+to recover the device in case of a failed update.
+
+Permanent installation can be performed either by using the nv3p protocol or by
+pre-loading just built U-Boot into RAM.
+
+Processing for the NV3P protocol
+********************************
+
+.. code-block:: bash
+
+ $ git clone https://gitlab.com/grate-driver/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-tegra.bin here
+ $ ./re-crypt.py --dev tf101
+
+The script will produce a ``repart-block.bin`` ready to flash.
+
+Processing for pre-loaded U-Boot
+********************************
+
+The procedure is the same, but the ``--split`` argument is used with the
+``re-crypt.py``. The script will produce ``bct.img`` and ``ebt.img`` ready
+to flash.
+
+Flashing U-Boot into the eMMC
+-----------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked in the proper
+place. NOT HERE! Flashing U-Boot will erase all eMMC, so make a backup before!
+
+Permanent installation can be performed either by using the nv3p protocol or by
+pre-loading just built U-Boot into RAM.
+
+Flashing with the NV3P protocol
+*******************************
+
+Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
+enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
+pre-loading vendor bootloader with the Fusée Gelée.
+
+With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
+encrypted state in form, which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+When flashing is done, reboot the device.
+
+Flashing with a pre-loaded U-Boot
+*********************************
+
+U-Boot pre-loaded into RAM acts the same as when it was booted "cold".
Currently
+U-Boot supports bootmenu entry fastboot, which allows to write a processed copy
+of U-Boot permanently into eMMC.
+
+While pre-loading U-Boot, hold the ``volume down`` button which will trigger
+the bootmenu. There, select ``fastboot`` using the volume and power buttons.
+After, on host PC, do:
+
+.. code-block:: bash
+
+ $ fastboot flash 0.1 bct.img
+ $ fastboot flash 0.2 ebt.img
+ $ fastboot reboot
+
+Device will reboot.
+
+Boot
+----
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on
+eMMC. Additionally, if the Volume Down button is pressed while booting, the
+device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC
+as mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot console
+and update bootloader (check the next chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restrictions on eMMC and allows
+the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the MicroSD card
+and insert it into the tablet. Enter bootmenu, choose update the bootloader
+option with the Power button and U-Boot should update itself. Once the process
+is completed, U-Boot will ask to press any button to reboot.
diff --git a/include/configs/transformer-t20.h
b/include/configs/transformer-t20.h
new file mode 100644
index 0000000000..45f937804f
--- /dev/null
+++ b/include/configs/transformer-t20.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamo...@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra20-common.h"
+#include "transformer-common.h"
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--
2.43.0
