There is quite a bit of code in pytest to try to start up U-Boot on a
board, with timeouts, expects, etc.
This is tedious to maintain and is peripheral to the test system's
purpose. It seems better to put this logic in the lab itself, where is
can provide such support.
With Labgrid we can use the UbootStrategy class to get the board into a
useful state, however it needs to do it. Then it can report to pytest
by writing a suitable string along with the U-Boot version it detected.
Add support for detecting 'lab mode' and simply assume that all is well
in that case. Collect the version string when Labgrid says it is ready.
Signed-off-by: Simon Glass <s...@chromium.org>
---
(no changes since v1)
test/py/u_boot_console_base.py | 68 ++++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 15 deletions(-)
diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py
index dbf54eadd0f..cfde57649f1 100644
--- a/test/py/u_boot_console_base.py
+++ b/test/py/u_boot_console_base.py
@@ -23,13 +23,21 @@ pattern_stop_autoboot_prompt = re.compile('Hit any key to
stop autoboot: ')
pattern_unknown_command = re.compile('Unknown command \'.*\' - try \'help\'')
pattern_error_notification = re.compile('## Error: ')
pattern_error_please_reset = re.compile('### ERROR ### Please RESET the board
###')
-pattern_ready_prompt = re.compile('U-Boot is ready')
+pattern_ready_prompt = re.compile('{lab ready in (.*)s: (.*)}')
+pattern_lab_mode = re.compile('{lab mode.*}')
PAT_ID = 0
PAT_RE = 1
# Timeout before expecting the console to be ready (in milliseconds)
-TIMEOUT_MS = 30000
+TIMEOUT_MS = 30000 # Standard timeout
+
+# Timeout for board preparation in lab mode. This needs to be enough to build
+# U-Boot, write it to the board and then boot the board. Since this process is
+# under the control of another program (e.g. Labgrid), it will failure sooner
+# if something goes way. So use a very long timeout here to cover all possible
+# situations.
+TIMEOUT_PREPARE_MS = 3 * 60 * 1000
bad_pattern_defs = (
('spl_signon', pattern_u_boot_spl_signon),
@@ -117,6 +125,7 @@ class ConsoleBase(object):
self.at_prompt = False
self.at_prompt_logevt = None
+ self.lab_mode = False
def get_spawn(self):
# This is not called, ssubclass must define this.
@@ -150,40 +159,69 @@ class ConsoleBase(object):
self.p.close()
self.logstream.close()
+ def set_lab_mode(self):
+ """Select lab mode
+
+ This tells us that we will get a 'lab ready' message when the board is
+ ready for use. We don't need to look for signon messages.
+ """
+ self.log.info(f'test.py: Lab mode is active')
+ self.p.timeout = TIMEOUT_PREPARE_MS
+ self.lab_mode = True
+
def wait_for_boot_prompt(self, loop_num = 1):
"""Wait for the boot up until command prompt. This is for internal use
only.
"""
try:
+ self.log.info('Waiting for U-Boot to be ready')
bcfg = self.config.buildconfig
config_spl_serial = bcfg.get('config_spl_serial', 'n') == 'y'
env_spl_skipped = self.config.env.get('env__spl_skipped', False)
env_spl_banner_times =
self.config.env.get('env__spl_banner_times', 1)
- while loop_num > 0:
+ while not self.lab_mode and loop_num > 0:
loop_num -= 1
while config_spl_serial and not env_spl_skipped and
env_spl_banner_times > 0:
- m = self.p.expect([pattern_u_boot_spl_signon] +
- self.bad_patterns)
- if m != 0:
+ m = self.p.expect([pattern_u_boot_spl_signon,
+ pattern_lab_mode] + self.bad_patterns)
+ if m == 1:
+ self.set_lab_mode()
+ break
+ elif m != 0:
raise BootFail('Bad pattern found on SPL console: ' +
- self.bad_pattern_ids[m - 1])
+ self.bad_pattern_ids[m - 1])
env_spl_banner_times -= 1
- m = self.p.expect([pattern_u_boot_main_signon] +
self.bad_patterns)
- if m != 0:
- raise BootFail('Bad pattern found on console: ' +
- self.bad_pattern_ids[m - 1])
- self.u_boot_version_string = self.p.after
+ if not self.lab_mode:
+ m = self.p.expect([pattern_u_boot_main_signon,
+ pattern_lab_mode] + self.bad_patterns)
+ if m == 1:
+ self.set_lab_mode()
+ elif m != 0:
+ raise BootFail('Bad pattern found on console: ' +
+ self.bad_pattern_ids[m - 1])
+ if not self.lab_mode:
+ self.u_boot_version_string = self.p.after
while True:
m = self.p.expect([self.prompt_compiled, pattern_ready_prompt,
pattern_stop_autoboot_prompt] + self.bad_patterns)
- if m == 0 or m == 1:
+ if m == 0:
+ self.log.info(f'Found ready prompt {m}')
+ break
+ elif m == 1:
+ m = pattern_ready_prompt.search(self.p.after)
+ self.u_boot_version_string = m.group(2)
+ self.log.info(f'Lab: Board is ready')
+ self.p.timeout = TIMEOUT_MS
break
if m == 2:
+ self.log.info(f'Found autoboot prompt {m}')
self.p.send(' ')
continue
- raise BootFail('Bad pattern found on console: ' +
- self.bad_pattern_ids[m - 3])
+ if not self.lab_mode:
+ raise BootFail('Missing prompt / ready message on console:
' +
+ self.bad_pattern_ids[m - 3])
+ self.log.info(f'U-Boot is ready')
finally:
self.log.timestamp()
--
2.34.1
