On 15:19-20240627, Siddharth Vadapalli wrote: > The command "main_cpsw0_qsgmii_phyinit" has to be run depending on > whether or not the "do_main_cpsw0_qsgmii_phyinit" variable is set. > However, there is no support for the cases where the environment variable > "do_main_cpsw0_qsgmii_phyinit" is updated at runtime. On J721E, the value > of "do_main_cpsw0_qsgmii_phyinit" is updated at runtime. > > Fix the existing implementation in order to handle the case where the > value of "do_main_cpsw0_qsgmii_phyinit" is updated at runtime. Do so by > introducing the environment variable "update_do_main_cpsw0_qsgmii_phyinit" > which defaults to setting "do_main_cpsw0_qsgmii_phyinit" to zero, but at > the same time, it allows the board to update the value at runtime. > > Fixes: 0d72b0f2f83b ("include: env: ti: ti_common: Run > main_cpsw0_qsgmii_phyinit conditionally") > Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com>
Why cant we do this entirely in board files? we do the board detection there anyways.. > --- > > Hello, > > This patch is based on commit > 899b088674 Merge patch series "pxe: Add debugging for booting" > of U-Boot's next branch. > > Regards, > Siddharth. > > board/ti/j721e/j721e.env | 9 +++++---- > include/env/ti/ti_common.env | 3 ++- > 2 files changed, 7 insertions(+), 5 deletions(-) > > diff --git a/board/ti/j721e/j721e.env b/board/ti/j721e/j721e.env > index 38bfd7d496..03d7e81aa8 100644 > --- a/board/ti/j721e/j721e.env > +++ b/board/ti/j721e/j721e.env > @@ -29,7 +29,7 @@ bootdir=/boot > rd_spec=- > > #if CONFIG_TARGET_J7200_A72_EVM > -do_main_cpsw0_qsgmii_phyinit=1 > +update_do_main_cpsw0_qsgmii_phyinit=setenv do_main_cpsw0_qsgmii_phyinit 1; > init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; > gpio clear gpio@22_16 > main_cpsw0_qsgmii_phyinit= > @@ -39,10 +39,11 @@ main_cpsw0_qsgmii_phyinit= > #elif CONFIG_TARGET_J721E_A72_EVM > init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; > gpio clear gpio@22_16 > -main_cpsw0_qsgmii_phyinit= > +update_do_main_cpsw0_qsgmii_phyinit= > if test $board_name = J721EX-PM1-SOM || test $board_name = > J721EX-PM2-SOM || test $board_name = j721e; then > - do_main_cpsw0_qsgmii_phyinit=1; else > - do_main_cpsw0_qsgmii_phyinit=0; fi; > + setenv do_main_cpsw0_qsgmii_phyinit 1; else > + setenv do_main_cpsw0_qsgmii_phyinit 0; fi; > +main_cpsw0_qsgmii_phyinit= > if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} > -eq 1 && test ${boot} = mmc; then > run init_main_cpsw0_qsgmii_phy; \ > fi; > diff --git a/include/env/ti/ti_common.env b/include/env/ti/ti_common.env > index c5c3642177..d0b3d698a0 100644 > --- a/include/env/ti/ti_common.env > +++ b/include/env/ti/ti_common.env > @@ -23,9 +23,10 @@ get_fit_overlaystring= > done; > get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} > run_fit=run get_fit_config; bootm > ${addr_fit}#${name_fit_config}${overlaystring} > -do_main_cpsw0_qsgmii_phyinit=0 > +update_do_main_cpsw0_qsgmii_phyinit=setenv do_main_cpsw0_qsgmii_phyinit 0; > bootcmd_ti_mmc= > run findfdt; run init_${boot}; > + run update_do_main_cpsw0_qsgmii_phyinit; > #if CONFIG_CMD_REMOTEPROC > if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; > then run main_cpsw0_qsgmii_phyinit; > -- > 2.40.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D