Add i2c and rtc commands with all dependencies which are required for testing.
Additionally, add smc and cache commands to boot Zephyr on the A53. Signed-off-by: Daniel Schultz <d.schu...@phytec.de> --- configs/phycore_am62x_a53_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig index 56302383c0f..06b8834e074 100644 --- a/configs/phycore_am62x_a53_defconfig +++ b/configs/phycore_am62x_a53_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_ARM_SMCCC=y CONFIG_ARCH_K3=y CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 @@ -63,9 +64,13 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_DFU=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_RTC=y +CONFIG_CMD_SMC=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_MULTI_DTB_FIT=y @@ -123,6 +128,8 @@ CONFIG_TI_SCI_POWER_DOMAIN=y CONFIG_K3_SYSTEM_CONTROLLER=y CONFIG_REMOTEPROC_TI_K3_ARM64=y CONFIG_RESET_TI_SCI=y +CONFIG_DM_RTC=y +CONFIG_RTC_RV3028=y CONFIG_DM_SERIAL=y CONFIG_SOC_DEVICE=y CONFIG_SOC_DEVICE_TI_K3=y -- 2.25.1
