This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
Cc: Robert Nelson <robertcnel...@gmail.com>
---
arch/arm/dts/Makefile | 5 -
arch/arm/dts/omap3-beagle-u-boot.dtsi | 14 -
arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi | 14 -
arch/arm/dts/omap3-beagle-xm-ab.dts | 13 -
arch/arm/dts/omap3-beagle-xm-u-boot.dtsi | 14 -
arch/arm/dts/omap3-beagle-xm.dts | 406 ---------------
arch/arm/dts/omap3-beagle.dts | 433 ----------------
arch/arm/mach-omap2/omap3/Kconfig | 10 -
board/beagle/beagle/Kconfig | 12 -
board/beagle/beagle/MAINTAINERS | 6 -
board/beagle/beagle/Makefile | 7 -
board/beagle/beagle/beagle.c | 503 ------------------
board/beagle/beagle/beagle.h | 545 --------------------
board/beagle/beagle/led.c | 70 ---
configs/omap3_beagle_defconfig | 115 -----
include/configs/omap3_beagle.h | 200 -------
16 files changed, 2367 deletions(-)
delete mode 100644 arch/arm/dts/omap3-beagle-u-boot.dtsi
delete mode 100644 arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
delete mode 100644 arch/arm/dts/omap3-beagle-xm-ab.dts
delete mode 100644 arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
delete mode 100644 arch/arm/dts/omap3-beagle-xm.dts
delete mode 100644 arch/arm/dts/omap3-beagle.dts
delete mode 100644 board/beagle/beagle/Kconfig
delete mode 100644 board/beagle/beagle/MAINTAINERS
delete mode 100644 board/beagle/beagle/Makefile
delete mode 100644 board/beagle/beagle/beagle.c
delete mode 100644 board/beagle/beagle/beagle.h
delete mode 100644 board/beagle/beagle/led.c
delete mode 100644 configs/omap3_beagle_defconfig
delete mode 100644 include/configs/omap3_beagle.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 24a65c45a933..7936188f79e6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1010,11 +1010,6 @@ dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
omap3-evm-37xx.dtb \
omap3-evm.dtb
-dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
- omap3-beagle-xm-ab.dtb \
- omap3-beagle-xm.dtb \
- omap3-beagle.dtb
-
dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
diff --git a/arch/arm/dts/omap3-beagle-u-boot.dtsi
b/arch/arm/dts/omap3-beagle-u-boot.dtsi
deleted file mode 100644
index 2c03701c896a..000000000000
--- a/arch/arm/dts/omap3-beagle-u-boot.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot additions
- *
- * (C) Copyright 2017 Derald D. Woods <woods.techni...@gmail.com>
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart3;
- };
-};
diff --git a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
deleted file mode 100644
index 2c03701c896a..000000000000
--- a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot additions
- *
- * (C) Copyright 2017 Derald D. Woods <woods.techni...@gmail.com>
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart3;
- };
-};
diff --git a/arch/arm/dts/omap3-beagle-xm-ab.dts
b/arch/arm/dts/omap3-beagle-xm-ab.dts
deleted file mode 100644
index cb6968a8bce8..000000000000
--- a/arch/arm/dts/omap3-beagle-xm-ab.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "omap3-beagle-xm.dts"
-
-/ {
- /* HS USB Port 2 Power enable was inverted with the xM C */
- hsusb2_power: hsusb2_power_reg {
- enable-active-high;
- };
-};
diff --git a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
deleted file mode 100644
index 2c03701c896a..000000000000
--- a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot additions
- *
- * (C) Copyright 2017 Derald D. Woods <woods.techni...@gmail.com>
- */
-
-#include "omap3-u-boot.dtsi"
-
-/ {
- chosen {
- stdout-path = &uart3;
- };
-};
diff --git a/arch/arm/dts/omap3-beagle-xm.dts b/arch/arm/dts/omap3-beagle-xm.dts
deleted file mode 100644
index 73152f6fa82b..000000000000
--- a/arch/arm/dts/omap3-beagle-xm.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
- model = "TI OMAP3 BeagleBoard xM";
- compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
-
- cpus {
- cpu@0 {
- cpu0-supply = <&vcc>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-
- aliases {
- display0 = &dvi0;
- display1 = &tv0;
- ethernet = ðernet;
- };
-
- led-controller-1 {
- compatible = "gpio-leds";
-
- led-1 {
- label = "beagleboard::usr0";
- gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED
*/
- linux,default-trigger = "heartbeat";
- };
-
- led-2 {
- label = "beagleboard::usr1";
- gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED
*/
- linux,default-trigger = "mmc0";
- };
- };
-
- led-controller-2 {
- compatible = "pwm-leds";
-
- led-3 {
- label = "beagleboard::pmu_stat";
- pwms = <&twl_pwmled 1 7812500>;
- max-brightness = <127>;
- };
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "omap3beagle";
-
- ti,mcbsp = <&mcbsp2>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- user {
- label = "user";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- linux,code = <0x114>;
- wakeup-source;
- };
-
- };
-
- /* HS USB Port 2 Power */
- hsusb2_power: hsusb2_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb2_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 2 */
- hsusb2_phy: hsusb2_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
- vcc-supply = <&hsusb2_power>;
- #phy-cells = <0>;
- };
-
- tfp410: encoder0 {
- compatible = "ti,tfp410";
- powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-
- /* XXX pinctrl from twl */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tfp410_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tfp410_out: endpoint {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector0 {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
- };
-
- tv0: connector1 {
- compatible = "svideo-connector";
- label = "tv";
-
- port {
- tv_connector_in: endpoint {
- remote-endpoint = <&venc_out>;
- };
- };
- };
-
- etb@5401b000 {
- compatible = "arm,coresight-etb10", "arm,primecell";
- reg = <0x5401b000 0x1000>;
-
- clocks = <&emu_src_ck>;
- clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
- };
- };
- };
-
- etm@54010000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0x54010000 0x1000>;
-
- clocks = <&emu_src_ck>;
- clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
- };
- };
- };
-};
-
-&omap3_pmx_wkup {
- gpio1_pins: pinmux_gpio1_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT |
PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
- >;
- };
-
- dss_dpi_pins2: pinmux_dss_dpi_pins1 {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /*
sys_boot0.dss_data18 */
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /*
sys_boot1.dss_data19 */
- OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /*
sys_boot3.dss_data20 */
- OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /*
sys_boot4.dss_data21 */
- OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /*
sys_boot5.dss_data22 */
- OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /*
sys_boot6.dss_data23 */
- >;
- };
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusb2_pins
- >;
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)
/* uart3_rx_irrx.uart3_rx_irrx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)
/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
- >;
- };
-
- hsusb2_pins: pinmux_hsusb2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
- OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
- OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
- OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
- OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
- OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
- >;
- };
-
- dss_dpi_pins1: pinmux_dss_dpi_pins2 {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /*
dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /*
dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /*
dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /*
dss_acbias.dss_acbias */
-
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /*
dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /*
dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /*
dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /*
dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /*
dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /*
dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /*
dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /*
dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /*
dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /*
dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /*
dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /*
dss_data17.dss_data17 */
-
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /*
dss_data18.dss_data0 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /*
dss_data19.dss_data1 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /*
dss_data20.dss_data2 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /*
dss_data21.dss_data3 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /*
dss_data22.dss_data4 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /*
dss_data23.dss_data5 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusb2_2_pins
- >;
-
- hsusb2_2_pins: pinmux_hsusb2_2_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
/* etk_d10.hsusb2_clk */
- OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
/* etk_d11.hsusb2_stp */
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d12.hsusb2_dir */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d13.hsusb2_nxt */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d14.hsusb2_data0 */
- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d15.hsusb2_data1 */
- >;
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
-
- twl_power: power {
- compatible = "ti,twl4030-power-beagleboard-xm",
"ti,twl4030-power-idle-osc-off";
- ti,use_poweroff;
- };
- };
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- vqmmc-supply = <&vsim>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&twl_gpio {
- ti,use-leds;
- /* pullups: BIT(1) */
- ti,pullups = <0x000002>;
- /*
- * pulldowns:
- * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
- * BIT(15), BIT(16), BIT(17)
- */
- ti,pulldowns = <0x03a1c4>;
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
-
-&uart3 {
- interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
- pinctrl-names = "default";
- pinctrl-0 = <&gpio1_pins>;
-};
-
-&usbhshost {
- port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <0 &hsusb2_phy>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub@2 {
- compatible = "usb424,9514";
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethernet: ethernet@1 {
- compatible = "usb424,ec00";
- reg = <1>;
- };
- };
-};
-
-&vaux2 {
- regulator-name = "usb_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
-};
-
-&mcbsp2 {
- status = "okay";
-};
-
-&dss {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <
- &dss_dpi_pins1
- &dss_dpi_pins2
- >;
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
-};
-
-&venc {
- status = "okay";
-
- vdda-supply = <&vdac>;
-
- port {
- venc_out: endpoint {
- remote-endpoint = <&tv_connector_in>;
- ti,channels = <2>;
- };
- };
-};
diff --git a/arch/arm/dts/omap3-beagle.dts b/arch/arm/dts/omap3-beagle.dts
deleted file mode 100644
index 321b6d7448ac..000000000000
--- a/arch/arm/dts/omap3-beagle.dts
+++ /dev/null
@@ -1,433 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
- model = "TI OMAP3 BeagleBoard";
- compatible = "ti,omap3-beagle", "ti,omap3";
-
- cpus {
- cpu@0 {
- cpu0-supply = <&vcc>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- aliases {
- display0 = &dvi0;
- display1 = &tv0;
- };
-
- leds {
- compatible = "gpio-leds";
- led-pmu-stat {
- label = "beagleboard::pmu_stat";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
- };
-
- led-heartbeat {
- label = "beagleboard::usr0";
- gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED
*/
- linux,default-trigger = "heartbeat";
- };
-
- led-mmc {
- label = "beagleboard::usr1";
- gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED
*/
- linux,default-trigger = "mmc0";
- };
- };
-
- /* HS USB Port 2 Power */
- hsusb2_power: hsusb2_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb2_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 2 */
- hsusb2_phy: hsusb2_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
- vcc-supply = <&hsusb2_power>;
- #phy-cells = <0>;
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "omap3beagle";
-
- ti,mcbsp = <&mcbsp2>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- user {
- label = "user";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- linux,code = <0x114>;
- wakeup-source;
- };
-
- };
-
- tfp410: encoder0 {
- compatible = "ti,tfp410";
- powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
- pinctrl-names = "default";
- pinctrl-0 = <&tfp410_pins>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tfp410_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tfp410_out: endpoint {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector0 {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
- };
-
- tv0: connector1 {
- compatible = "svideo-connector";
- label = "tv";
-
- port {
- tv_connector_in: endpoint {
- remote-endpoint = <&venc_out>;
- };
- };
- };
-
- etb@540000000 {
- compatible = "arm,coresight-etb10", "arm,primecell";
- reg = <0x5401b000 0x1000>;
-
- clocks = <&emu_src_ck>;
- clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
- };
- };
- };
-
- etm@54010000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0x54010000 0x1000>;
-
- clocks = <&emu_src_ck>;
- clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
- };
- };
- };
-};
-
-&omap3_pmx_wkup {
- gpio1_pins: pinmux_gpio1_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT |
PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
- >;
- };
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusb2_pins
- >;
-
- hsusb2_pins: pinmux_hsusb2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
- OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
- OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
- OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
- OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
- OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT |
PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /*
uart3_tx_irtx.uart3_tx_irtx */
- >;
- };
-
- tfp410_pins: pinmux_tfp410_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)
/* hdq_sio.gpio_170 */
- >;
- };
-
- dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /*
dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /*
dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /*
dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /*
dss_acbias.dss_acbias */
- OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /*
dss_data0.dss_data0 */
- OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /*
dss_data1.dss_data1 */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /*
dss_data2.dss_data2 */
- OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /*
dss_data3.dss_data3 */
- OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /*
dss_data4.dss_data4 */
- OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /*
dss_data5.dss_data5 */
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /*
dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /*
dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /*
dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /*
dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /*
dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /*
dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /*
dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /*
dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /*
dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /*
dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /*
dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /*
dss_data17.dss_data17 */
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /*
dss_data18.dss_data18 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /*
dss_data19.dss_data19 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /*
dss_data20.dss_data20 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /*
dss_data21.dss_data21 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /*
dss_data22.dss_data22 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /*
dss_data23.dss_data23 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusb2_2_pins
- >;
-
- hsusb2_2_pins: pinmux_hsusb2_2_pins {
- pinctrl-single,pins = <
- OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
/* etk_d10.hsusb2_clk */
- OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
/* etk_d11.hsusb2_stp */
- OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d12.hsusb2_dir */
- OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d13.hsusb2_nxt */
- OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d14.hsusb2_data0 */
- OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN |
MUX_MODE3) /* etk_d15.hsusb2_data1 */
- >;
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
- };
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
- clock-frequency = <100000>;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- vqmmc-supply = <&vsim>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&usbhshost {
- port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <0 &hsusb2_phy>;
-};
-
-&twl_gpio {
- ti,use-leds;
- /* pullups: BIT(1) */
- ti,pullups = <0x000002>;
- /*
- * pulldowns:
- * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
- * BIT(15), BIT(16), BIT(17)
- */
- ti,pulldowns = <0x03a1c4>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&gpio1 {
- pinctrl-names = "default";
- pinctrl-0 = <&gpio1_pins>;
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
-
-&vaux2 {
- regulator-name = "vdd_ehci";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
-};
-
-&mcbsp2 {
- status = "okay";
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
- regulator-always-on;
-};
-
-&dss {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&dss_dpi_pins>;
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
-};
-
-&venc {
- status = "okay";
-
- vdda-supply = <&vdac>;
-
- port {
- venc_out: endpoint {
- remote-endpoint = <&tv_connector_in>;
- ti,channels = <2>;
- };
- };
-};
-
-&gpmc {
- status = "okay";
- ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
-
- /* Chip select 0 */
- nand@0,0 {
- compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* NAND I/O window, 4 bytes */
- interrupt-parent = <&gpmc>;
- interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
- <1 IRQ_TYPE_NONE>; /* termcount */
- ti,nand-ecc-opt = "ham1";
- rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
- nand-bus-width = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- gpmc,device-width = <2>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <36>;
- gpmc,cs-wr-off-ns = <36>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <24>;
- gpmc,adv-wr-off-ns = <36>;
- gpmc,oe-on-ns = <6>;
- gpmc,oe-off-ns = <48>;
- gpmc,we-on-ns = <6>;
- gpmc,we-off-ns = <30>;
- gpmc,rd-cycle-ns = <72>;
- gpmc,wr-cycle-ns = <72>;
- gpmc,access-ns = <54>;
- gpmc,wr-access-ns = <30>;
-
- partition@0 {
- label = "X-Loader";
- reg = <0 0x80000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x80000 0x1e0000>;
- };
- partition@1c0000 {
- label = "U-Boot Env";
- reg = <0x260000 0x20000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x280000 0x400000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0xf980000>;
- };
- };
-};
diff --git a/arch/arm/mach-omap2/omap3/Kconfig
b/arch/arm/mach-omap2/omap3/Kconfig
index 850ee76746ee..f15f44fe7d4b 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -34,15 +34,6 @@ config TARGET_AM3517_EVM
select DM_SERIAL
imply CMD_DM
-config TARGET_OMAP3_BEAGLE
- bool "TI OMAP3 BeagleBoard"
- select DM
- select DM_GPIO
- select DM_SERIAL
- select OMAP3_GPIO_5
- select OMAP3_GPIO_6
- imply CMD_DM
-
config TARGET_CM_T35
bool "CompuLab CM-T3530 and CM-T3730 boards"
select OMAP3_GPIO_2
@@ -153,7 +144,6 @@ config SYS_SOC
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
-source "board/beagle/beagle/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/omap3evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
diff --git a/board/beagle/beagle/Kconfig b/board/beagle/beagle/Kconfig
deleted file mode 100644
index eade599dc934..000000000000
--- a/board/beagle/beagle/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_BEAGLE
-
-config SYS_BOARD
- default "beagle"
-
-config SYS_VENDOR
- default "beagle"
-
-config SYS_CONFIG_NAME
- default "omap3_beagle"
-
-endif
diff --git a/board/beagle/beagle/MAINTAINERS b/board/beagle/beagle/MAINTAINERS
deleted file mode 100644
index c7fa87acfcc8..000000000000
--- a/board/beagle/beagle/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BEAGLE BOARD
-M: Tom Rini <tr...@konsulko.com>
-S: Maintained
-F: board/beagle/beagle/
-F: include/configs/omap3_beagle.h
-F: configs/omap3_beagle_defconfig
diff --git a/board/beagle/beagle/Makefile b/board/beagle/beagle/Makefile
deleted file mode 100644
index fc9288cf1863..000000000000
--- a/board/beagle/beagle/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-
-obj-y := beagle.o
-obj-$(CONFIG_LED_STATUS) += led.o
diff --git a/board/beagle/beagle/beagle.c b/board/beagle/beagle/beagle.c
deleted file mode 100644
index ac2f89cf213a..000000000000
--- a/board/beagle/beagle/beagle.c
+++ /dev/null
@@ -1,503 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004-2011
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Sunil Kumar <sunilsain...@gmail.com>
- * Shashi Ranjan <shashiranjanmc...@gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- * Richard Woodruff <r-woodru...@ti.com>
- * Syed Mohammed Khasim <kha...@ti.com>
- *
- */
-#include <config.h>
-#include <bootstage.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <net.h>
-#include <ns16550.h>
-#include <serial.h>
-#ifdef CONFIG_LED_STATUS
-#include <status_led.h>
-#endif
-#include <twl4030.h>
-#include <asm/global_data.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/omap_musb.h>
-#include <linux/errno.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/musb.h>
-#include "beagle.h"
-#include <command.h>
-
-#define TWL4030_I2C_BUS 0
-#define EXPANSION_EEPROM_I2C_BUS 1
-#define EXPANSION_EEPROM_I2C_ADDRESS 0x50
-
-#define TINCANTOOLS_ZIPPY 0x01000100
-#define TINCANTOOLS_ZIPPY2 0x02000100
-#define TINCANTOOLS_TRAINER 0x04000100
-#define TINCANTOOLS_SHOWDOG 0x03000100
-#define KBADC_BEAGLEFPGA 0x01000600
-#define LW_BEAGLETOUCH 0x01000700
-#define BRAINMUX_LCDOG 0x01000800
-#define BRAINMUX_LCDOGTOUCH 0x02000800
-#define BBTOYS_WIFI 0x01000B00
-#define BBTOYS_VGA 0x02000B00
-#define BBTOYS_LCD 0x03000B00
-#define BCT_BRETTL3 0x01000F00
-#define BCT_BRETTL4 0x02000F00
-#define LSR_COM6L_ADPT 0x01001300
-#define BEAGLE_NO_EEPROM 0xffffffff
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct {
- unsigned int device_vendor;
- unsigned char revision;
- unsigned char content;
- char fab_revision[8];
- char env_var[16];
- char env_setting[64];
-} expansion_config;
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
- status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
-#endif
-
- return 0;
-}
-
-#if defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- if (serial_tstc() && serial_getc() == 'c')
- return 1;
-
- return 0;
-}
-#endif /* CONFIG_SPL_OS_BOOT */
-
-/*
- * Routine: get_board_revision
- * Description: Detect if we are running on a Beagle revision Ax/Bx,
- * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading
- * the level of GPIO173, GPIO172 and GPIO171. This should
- * result in
- * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
- * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
- * GPIO173, GPIO172, GPIO171: 1 0 1 => C4
- * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx
- * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx
- */
-static int get_board_revision(void)
-{
- static int revision = -1;
-
- if (revision == -1) {
- if (!gpio_request(171, "rev0") &&
- !gpio_request(172, "rev1") &&
- !gpio_request(173, "rev2")) {
- gpio_direction_input(171);
- gpio_direction_input(172);
- gpio_direction_input(173);
-
- revision = gpio_get_value(173) << 2 |
- gpio_get_value(172) << 1 |
- gpio_get_value(171);
- } else {
- printf("Error: unable to acquire board revision
GPIOs\n");
- }
- }
-
- return revision;
-}
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
- int pop_mfr, pop_id;
-
- /*
- * We need to identify what PoP memory is on the board so that
- * we know what timings to use. If we can't identify it then
- * we know it's an xM. To map the ID values please see nand_ids.c
- */
- identify_nand_chip(&pop_mfr, &pop_id);
-
- timings->mr = MICRON_V_MR_165;
- switch (get_board_revision()) {
- case REVISION_C4:
- if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) {
- /* 512MB DDR */
- timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_165;
- timings->ctrlb = NUMONYX_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- break;
- } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) {
- /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/
- timings->mcfg = MICRON_V_MCFG_165(128 << 20);
- timings->ctrla = MICRON_V_ACTIMA_165;
- timings->ctrlb = MICRON_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- break;
- } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) {
- /* Beagleboard Rev C5, 256MB DDR */
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- break;
- }
- case REVISION_XM_AB:
- case REVISION_XM_C:
- if (pop_mfr == 0) {
- /* 256MB DDR */
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- } else {
- /* 512MB DDR */
- timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_165;
- timings->ctrlb = NUMONYX_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- }
- break;
- default:
- /* Assume 128MB and Micron/165MHz timings to be safe */
- timings->mcfg = MICRON_V_MCFG_165(128 << 20);
- timings->ctrla = MICRON_V_ACTIMA_165;
- timings->ctrlb = MICRON_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- }
-}
-#endif
-
-/*
- * Routine: get_expansion_id
- * Description: This function checks for expansion board by checking I2C
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
-static unsigned int get_expansion_id(void)
-{
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying
with 16bit:\n");
- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8
*)&expansion_config,
- sizeof(expansion_config));
- }
-
- i2c_set_bus_num(TWL4030_I2C_BUS);
-
- return expansion_config.device_vendor;
-}
-
-#ifdef CONFIG_VIDEO_OMAP3
-/*
- * Configure DSS to display background color on DVID
- * Configure VENC to display color bar on S-Video
- */
-static void beagle_display_init(void)
-{
- omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
- switch (get_board_revision()) {
- case REVISION_AXBX:
- case REVISION_CX:
- case REVISION_C4:
- omap3_dss_panel_config(&dvid_cfg);
- break;
- case REVISION_XM_AB:
- case REVISION_XM_C:
- default:
- omap3_dss_panel_config(&dvid_cfg_xm);
- break;
- }
-}
-
-/*
- * Enable DVI power
- */
-static void beagle_dvi_pup(void)
-{
- uchar val;
-
- switch (get_board_revision()) {
- case REVISION_AXBX:
- case REVISION_CX:
- case REVISION_C4:
- gpio_request(170, "dvi");
- gpio_direction_output(170, 0);
- gpio_set_value(170, 1);
- break;
- case REVISION_XM_AB:
- case REVISION_XM_C:
- default:
- #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3)
- #define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6)
-
- i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1);
- val |= 4;
- i2c_write(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1);
-
- i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1);
- val |= 4;
- i2c_write(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1);
- break;
- }
-}
-#endif
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
- struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
- struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
- struct control_prog_io *prog_io_base = (struct control_prog_io
*)OMAP34XX_CTRL_BASE;
- bool generate_fake_mac = false;
- u32 value;
-
- /* Enable i2c2 pullup resisters */
- value = readl(&prog_io_base->io1);
- value &= ~(PRG_I2C2_PULLUPRESX);
- writel(value, &prog_io_base->io1);
-
- switch (get_board_revision()) {
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- env_set("beaglerev", "AxBx");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- env_set("beaglerev", "Cx");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- env_set("beaglerev", "C4");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
- break;
- case REVISION_XM_AB:
- printf("Beagle xM Rev A/B\n");
- env_set("beaglerev", "xMAB");
- MUX_BEAGLE_XM();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
- generate_fake_mac = true;
- break;
- case REVISION_XM_C:
- printf("Beagle xM Rev C\n");
- env_set("beaglerev", "xMC");
- MUX_BEAGLE_XM();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
- generate_fake_mac = true;
- break;
- default:
- printf("Beagle unknown 0x%02x\n", get_board_revision());
- MUX_BEAGLE_XM();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
- generate_fake_mac = true;
- }
-
- switch (get_expansion_id()) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_TINCANTOOLS_ZIPPY();
- env_set("buddy", "zippy");
- break;
- case TINCANTOOLS_ZIPPY2:
- printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_TINCANTOOLS_ZIPPY();
- env_set("buddy", "zippy2");
- break;
- case TINCANTOOLS_TRAINER:
- printf("Recognized Tincantools Trainer board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- MUX_TINCANTOOLS_ZIPPY();
- MUX_TINCANTOOLS_TRAINER();
- env_set("buddy", "trainer");
- break;
- case TINCANTOOLS_SHOWDOG:
- printf("Recognized Tincantools Showdow board (rev %d %s)\n",
- expansion_config.revision,
- expansion_config.fab_revision);
- /* Place holder for DSS2 definition for showdog lcd */
- env_set("defaultdisplay", "showdoglcd");
- env_set("buddy", "showdog");
- break;
- case KBADC_BEAGLEFPGA:
- printf("Recognized KBADC Beagle FPGA board\n");
- MUX_KBADC_BEAGLEFPGA();
- env_set("buddy", "beaglefpga");
- break;
- case LW_BEAGLETOUCH:
- printf("Recognized Liquidware BeagleTouch board\n");
- env_set("buddy", "beagletouch");
- break;
- case BRAINMUX_LCDOG:
- printf("Recognized Brainmux LCDog board\n");
- env_set("buddy", "lcdog");
- break;
- case BRAINMUX_LCDOGTOUCH:
- printf("Recognized Brainmux LCDog Touch board\n");
- env_set("buddy", "lcdogtouch");
- break;
- case BBTOYS_WIFI:
- printf("Recognized BeagleBoardToys WiFi board\n");
- MUX_BBTOYS_WIFI()
- env_set("buddy", "bbtoys-wifi");
- break;
- case BBTOYS_VGA:
- printf("Recognized BeagleBoardToys VGA board\n");
- break;
- case BBTOYS_LCD:
- printf("Recognized BeagleBoardToys LCD board\n");
- break;
- case BCT_BRETTL3:
- printf("Recognized bct electronic GmbH brettl3 board\n");
- break;
- case BCT_BRETTL4:
- printf("Recognized bct electronic GmbH brettl4 board\n");
- break;
- case LSR_COM6L_ADPT:
- printf("Recognized LSR COM6L Adapter Board\n");
- MUX_BBTOYS_WIFI()
- env_set("buddy", "lsr-com6l-adpt");
- break;
- case BEAGLE_NO_EEPROM:
- printf("No EEPROM on expansion board\n");
- env_set("buddy", "none");
- break;
- default:
- printf("Unrecognized expansion board: %x\n",
- expansion_config.device_vendor);
- env_set("buddy", "unknown");
- }
-
- if (expansion_config.content == 1)
- env_set(expansion_config.env_var, expansion_config.env_setting);
-
- twl4030_power_init();
- twl4030_power_mmc_init(0);
-
- switch (get_board_revision()) {
- case REVISION_XM_AB:
- twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
- break;
- default:
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON |
TWL4030_LED_LEDEN_LEDBON);
- break;
- }
-
- /* Set GPIO states before they are made outputs */
- writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
- &gpio6_base->setdataout);
- writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
- GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
-
- /* Configure GPIOs to output */
- writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
- writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
- GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
-
- omap_die_id_display();
-
-#ifdef CONFIG_VIDEO_OMAP3
- beagle_dvi_pup();
- beagle_display_init();
- omap3_dss_enable();
-#endif
-
- if (generate_fake_mac)
- omap_die_id_usbethaddr();
-
-#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
- if (strlen(CONFIG_MTDIDS_DEFAULT))
- env_set("mtdids", CONFIG_MTDIDS_DEFAULT);
-
- if (strlen(CONFIG_MTDPARTS_DEFAULT))
- env_set("mtdparts", CONFIG_MTDPARTS_DEFAULT);
-#endif
-
- return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_BEAGLE();
-}
diff --git a/board/beagle/beagle/beagle.h b/board/beagle/beagle/beagle.h
deleted file mode 100644
index ce78ea661b9f..000000000000
--- a/board/beagle/beagle/beagle.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Dirk Behme <dirk.be...@gmail.com>
- */
-#ifndef _BEAGLE_H_
-#define _BEAGLE_H_
-
-#include <asm/arch/dss.h>
-
-const omap3_sysinfo sysinfo = {
- DDR_STACKED,
- "OMAP3 Beagle board",
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
- "OneNAND",
-#else
- "NAND",
-#endif
-};
-
-/* BeagleBoard revisions */
-#define REVISION_AXBX 0x7
-#define REVISION_CX 0x6
-#define REVISION_C4 0x5
-#define REVISION_XM_AB 0x0
-#define REVISION_XM_C 0x2
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_BEAGLE() \
- /*SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
- MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
- MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
- MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
- MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
- MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
- MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
- MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
- MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
- MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
- MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
- MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
- MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
- MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
- MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
- MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
- MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1))
/*SYS_nDMA_REQ2*/\
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1))
/*SYS_nDMA_REQ3*/\
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))
/*GPMC_nADV_ALE*/\
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0))
/*GPMC_nBE0_CLE*/\
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
- /*DSS*/\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
- /*CAMERA*/\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\
- /*Audio Interface */\
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0))
/*McBSP2_CLKX*/\
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
- MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- /*Expansion card */\
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
- /*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
- /*Bluetooth*/\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
- MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\
- MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
- MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
- /*Modem Interface */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \
- MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1))
/*SSI1_DAT_RX*/\
- MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1))
/*SSI1_FLAG_RX*/\
- MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1))
/*SSI1_RDY_RX*/\
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\
- MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\
- MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
- MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\
- MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\
- /*Serial Interface*/\
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0))
/*UART3_CTS_RCTX*/\
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD
*/\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0))
/*UART3_RX_IRRX*/\
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0))
/*UART3_TX_IRTX*/\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA0*/\
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA1*/\
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA2*/\
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA3*/\
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA4*/\
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA5*/\
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA6*/\
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA7*/\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
- MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
- MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
- MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
- /* USB EHCI (port 2) */\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3))
/*HSUSB2_DATA2*/\
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3))
/*HSUSB2_DATA7*/\
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3))
/*HSUSB2_DATA4*/\
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3))
/*HSUSB2_DATA5*/\
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3))
/*HSUSB2_DATA6*/\
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3))
/*HSUSB2_DATA3*/\
- MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DIR*/\
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_NXT*/\
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3))
/*HSUSB2_DATA0*/\
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3))
/*HSUSB2_DATA1*/\
- /*Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 -
MMC1_WP*/\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))
/*SYS_OFF_MODE*/\
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))
/*SYS_CLKOUT1*/\
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA0*/\
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA1*/\
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA2*/\
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA7*/\
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA4*/\
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA5*/\
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA6*/\
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3))
/*HSUSB1_DATA3*/\
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\
- MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
- MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
- MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
- MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
- MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
- MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
- MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
- MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
- MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
- MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
- MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
- MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
- MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
- MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
- MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
- MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
- MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
- MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
- MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
- MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
- MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
- MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
- MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
- MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
- MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
- MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
- MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
- MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
- MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
- MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
- MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
- MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
- MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0))
/*d2d_clk26mi*/\
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0))
/*d2d_nrespwron*/\
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm
*/\
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq
*/\
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0))
/*d2d_uma2p6fiq*/\
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0))
/*d2d_dmareq0*/\
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0))
/*d2d_dmareq1*/\
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0))
/*d2d_dmareq2*/\
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0))
/*d2d_dmareq3*/\
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0))
/*d2d_n3gtrst*/\
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0))
/*d2d_n3grtck*/\
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))
/*d2d_swakeup*/\
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0))
/*d2d_idlereq*/\
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0))
/*d2d_idleack*/\
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0))
/*d2d_mbusflag*/\
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))
/*d2d_sbusflag*/\
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
-
-#define MUX_BEAGLE_C() \
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\
- MUX_VAL(CP(UART2_RX), (IDIS | PTU | EN | M4)) /*GPIO_147*/
-
-#define MUX_BEAGLE_XM() \
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\
- MUX_VAL(CP(GPMC_WAIT1), (IDIS | PTU | EN | M4)) /*GPIO_63*/\
- MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\
- MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\
- MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\
- MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\
- MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\
- MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\
- MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/
-
-#define MUX_TINCANTOOLS_ZIPPY() \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | EN | M1)) /*MCSPI4_CLK*/\
- MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\
- MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | EN | M1)) /*MCSPI4_SIMO*/\
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)) /*MCSPI4_SOMI*/\
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | EN | M1)) /*MCSPI4_CS0*/\
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/
-
-#define MUX_TINCANTOOLS_TRAINER() \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
- MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
- MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) /*GPIO_140*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) /*GPIO_141*/\
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | EN | M4)) /*GPIO_162*/
-
-#define MUX_KBADC_BEAGLEFPGA() \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | DIS | M1)) /*MCSPI4_CLK*/\
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTU | DIS | M1)) /*MCSPI4_SIMO*/\
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTU | EN | M1)) /*MCSPI4_SOMI*/\
- MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/
-
-#define MUX_BBTOYS_WIFI() \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) /*GPIO_136
FM_EN/BT_WU*/\
- MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137
WLAN_IRQ*/\
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139
WLAN_EN*/
-
-/*
- * Display Configuration
- */
-
-#define DVI_BEAGLE_ORANGE_COL 0x00FF8000
-#define VENC_HEIGHT 0x00ef
-#define VENC_WIDTH 0x027f
-
-/*
- * Configure VENC in DSS for Beagle to generate Color Bar
- *
- * Kindly refer to OMAP TRM for definition of these values.
- */
-static const struct venc_regs venc_config_std_tv = {
- .status = 0x0000001B,
- .f_control = 0x00000040,
- .vidout_ctrl = 0x00000000,
- .sync_ctrl = 0x00008000,
- .llen = 0x00008359,
- .flens = 0x0000020C,
- .hfltr_ctrl = 0x00000000,
- .cc_carr_wss_carr = 0x043F2631,
- .c_phase = 0x00000024,
- .gain_u = 0x00000130,
- .gain_v = 0x00000198,
- .gain_y = 0x000001C0,
- .black_level = 0x0000006A,
- .blank_level = 0x0000005C,
- .x_color = 0x00000000,
- .m_control = 0x00000001,
- .bstamp_wss_data = 0x0000003F,
- .s_carr = 0x21F07C1F,
- .line21 = 0x00000000,
- .ln_sel = 0x00000015,
- .l21__wc_ctl = 0x00001400,
- .htrigger_vtrigger = 0x00000000,
- .savid__eavid = 0x069300F4,
- .flen__fal = 0x0016020C,
- .lal__phase_reset = 0x00060107,
- .hs_int_start_stop_x = 0x008D034E,
- .hs_ext_start_stop_x = 0x000F0359,
- .vs_int_start_x = 0x01A00000,
- .vs_int_stop_x__vs_int_start_y = 0x020501A0,
- .vs_int_stop_y__vs_ext_start_x = 0x01AC0024,
- .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC,
- .vs_ext_stop_y = 0x00000006,
- .avid_start_stop_x = 0x03480079,
- .avid_start_stop_y = 0x02040024,
- .fid_int_start_x__fid_int_start_y = 0x0001008A,
- .fid_int_offset_y__fid_ext_start_x = 0x01AC0106,
- .fid_ext_start_y__fid_ext_offset_y = 0x01060006,
- .tvdetgp_int_start_stop_x = 0x00140001,
- .tvdetgp_int_start_stop_y = 0x00010001,
- .gen_ctrl = 0x00FF0000,
- .output_control = 0x0000000D,
- .dac_b__dac_c = 0x00000000
-};
-
-/*
- * Configure Timings for DVI D
- */
-static const struct panel_config dvid_cfg = {
- .timing_h = 0x0ff03f31, /* Horizontal timing */
- .timing_v = 0x01400504, /* Vertical timing */
- .pol_freq = 0x00007028, /* Pol Freq */
- .divisor = 0x00010006, /* 72Mhz Pixel Clock */
- .lcd_size = 0x02ff03ff, /* 1024x768 */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
-};
-
-static const struct panel_config dvid_cfg_xm = {
- .timing_h = 0x1a4024c9, /* Horizontal timing */
- .timing_v = 0x02c00509, /* Vertical timing */
- .pol_freq = 0x00007028, /* Pol Freq */
- .divisor = 0x00010001, /* 96MHz Pixel Clock */
- .lcd_size = 0x02ff03ff, /* 1024x768 */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
-};
-#endif
diff --git a/board/beagle/beagle/led.c b/board/beagle/beagle/led.c
deleted file mode 100644
index efbd7c1e0e36..000000000000
--- a/board/beagle/beagle/led.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2010 Texas Instruments, Inc.
- * Jason Kridner <jkrid...@beagleboard.org>
- */
-#include <status_led.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-
-/* GPIO pins for the LEDs */
-#define BEAGLE_LED_USR0 150
-#define BEAGLE_LED_USR1 149
-
-#ifdef CONFIG_LED_STATUS_GREEN
-void green_led_off(void)
-{
- __led_set(CONFIG_LED_STATUS_GREEN, 0);
-}
-
-void green_led_on(void)
-{
- __led_set(CONFIG_LED_STATUS_GREEN, 1);
-}
-#endif
-
-static int get_led_gpio(led_id_t mask)
-{
-#ifdef CONFIG_LED_STATUS0
- if (CONFIG_LED_STATUS_BIT & mask)
- return BEAGLE_LED_USR0;
-#endif
-#ifdef CONFIG_LED_STATUS1
- if (CONFIG_LED_STATUS_BIT1 & mask)
- return BEAGLE_LED_USR1;
-#endif
-
- return 0;
-}
-
-void __led_init (led_id_t mask, int state)
-{
- int toggle_gpio;
-
- toggle_gpio = get_led_gpio(mask);
-
- if (toggle_gpio && !gpio_request(toggle_gpio, "led"))
- __led_set(mask, state);
-}
-
-void __led_toggle (led_id_t mask)
-{
- int state, toggle_gpio;
-
- toggle_gpio = get_led_gpio(mask);
- if (toggle_gpio) {
- state = gpio_get_value(toggle_gpio);
- gpio_direction_output(toggle_gpio, !state);
- }
-}
-
-void __led_set (led_id_t mask, int state)
-{
- int toggle_gpio;
-
- toggle_gpio = get_led_gpio(mask);
- if (toggle_gpio)
- gpio_direction_output(toggle_gpio, state);
-}
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
deleted file mode 100644
index 8a709243a900..000000000000
--- a/configs/omap3_beagle_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SPL_USE_ARCH_MEMCPY is not set
-# CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
-CONFIG_SPL_TEXT_BASE=0x40200000
-CONFIG_TARGET_OMAP3_BEAGLE=y
-CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
-CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
-CONFIG_SYS_PBSIZE=1055
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SYS_PROMPT="BeagleBoard # "
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x280000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FS_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SPL_PARTITION_UUIDS=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=1
-CONFIG_LED_STATUS_STATE=2
-CONFIG_LED_STATUS1=y
-CONFIG_LED_STATUS_BIT1=2
-CONFIG_LED_STATUS_STATE1=2
-CONFIG_LED_STATUS_BOOT_ENABLE=y
-CONFIG_LED_STATUS_BOOT=1
-CONFIG_LED_STATUS_GREEN_ENABLE=y
-CONFIG_LED_STATUS_GREEN=2
-CONFIG_LED_STATUS_CMD=y
-CONFIG_TWL4030_LED=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_MCS7830=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
-CONFIG_BCH=y
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
deleted file mode 100644
index af7cb3513f8f..000000000000
--- a/include/configs/omap3_beagle.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodru...@ti.com>
- * Syed Mohammed Khasim <x0kha...@ti.com>
- *
- * Configuration settings for the TI OMAP3530 Beagle board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-
-/* NAND */
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CFG_SYS_FLASH_BASE NAND_BASE
-#define CFG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13}
-#define CFG_SYS_NAND_ECCSIZE 512
-#define CFG_SYS_NAND_ECCBYTES 3
-/* NAND: SPL falcon mode configs */
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/* Enable Multi Bus support for I2C */
-#define CFG_I2C_MULTI_BUS
-
-/* DSS Support */
-
-/* TWL4030 LED Support */
-
-#define MEM_LAYOUT_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV
-
-#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
- "bootcmd_" #devtypel #instance "=" \
- "setenv mmcdev " #instance "; " \
- "run mmcboot\0"
-#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
- #devtypel #instance " "
-
-#if defined(CONFIG_MTD_RAW_NAND)
-
-#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
- "bootcmd_" #devtypel #instance "=" \
- "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
- "echo NAND boot disabled: No mtdids and/or mtdparts; " \
- "else " \
- "run nandboot; " \
- "fi\0"
-#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
- #devtypel #instance " "
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(LEGACY_MMC, legacy_mmc, 0) \
- func(UBIFS, ubifs, 0, rootfs, rootfs) \
- func(NAND, nand, 0)
-
-#else /* !CONFIG_MTD_RAW_NAND */
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(LEGACY_MMC, legacy_mmc, 0)
-
-#endif /* CONFIG_MTD_RAW_NAND */
-
-#include <config_distro_bootcmd.h>
-
-#define CFG_EXTRA_ENV_SETTINGS \
- MEM_LAYOUT_ENV_SETTINGS \
- "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_high=0xffffffff\0" \
- "console=ttyO2,115200n8\0" \
- "bootdir=/boot\0" \
- "bootenv=uEnv.txt\0" \
- "bootfile=zImage\0" \
- "bootpart=0:2\0" \
- "usbtty=cdc_acm\0" \
- "mpurate=auto\0" \
- "buddy=none\0" \
- "camera=none\0" \
- "vram=12M\0" \
- "dvimode=640x480MR-16@60\0" \
- "defaultdisplay=dvi\0" \
- "defaultargs=setenv defargs " \
- "mpurate=${mpurate} " \
- "buddy=${buddy} "\
- "camera=${camera} "\
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapdss.def_disp=${defaultdisplay}\0" \
- "optargs=\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
- "if test $beaglerev = Cx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
- "if test $beaglerev = C4; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
- "if test $beaglerev = xMAB; then " \
- "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine device tree to use;
fi\0" \
- "mmcdev=0\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "mmcargs=run defaultargs; setenv bootargs console=${console} " \
- "${mtdparts} " \
- "${defargs} " \
- "${optargs} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "userbutton_xm=gpio input 4;\0" \
- "userbutton_nonxm=gpio input 7;\0" \
- "userbutton=if gpio input 173; then " \
- "run userbutton_xm; " \
- "else " \
- "run userbutton_nonxm; " \
- "fi;\0" \
- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr}
${bootdir}/${bootenv}\0" \
- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
- "env import -t ${loadaddr} ${filesize}\0" \
- "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
- "mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "if run userbutton; then " \
- "setenv bootenv uEnv.txt;" \
- "else " \
- "setenv bootenv user.txt;" \
- "fi;" \
- "run loadbootenv && run importbootenv; " \
- "run ext4bootenv && run importbootenv; " \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...; " \
- "run uenvcmd; " \
- "fi; " \
- "fi\0" \
- "validatefdt=" \
- "if test $beaglerev = xMAB; then " \
- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile};
then " \
- "setenv fdtfile omap3-beagle-xm.dtb; " \
- "fi; " \
- "fi; \0" \
- "loadimage=ext4load mmc ${bootpart} ${loadaddr}
${bootdir}/${bootfile}\0" \
- "loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr}
${bootdir}/${fdtfile}\0" \
- "mmcboot=run mmcbootenv; " \
- "if run loadimage && run loaddtb; then " \
- "echo Booting ${bootdir}/${bootfile} from mmc
${bootpart} ...; " \
- "run mmcargs; " \
- "if test ${bootfile} = uImage; then " \
- "bootm ${loadaddr} - ${fdtaddr}; " \
- "fi; " \
- "if test ${bootfile} = zImage; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi; " \
- "fi\0" \
- "nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \
- "nandrootfstype=ubifs rootwait\0" \
- "nandargs=run defaultargs; setenv bootargs console=${console} " \
- "${mtdparts} " \
- "${defargs} " \
- "${optargs} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb;
then " \
- "echo Booting uImage from NAND MTD 'kernel' partition
...; " \
- "run nandargs; " \
- "bootm ${loadaddr} - ${fdtaddr}; " \
- "fi\0" \
- "loadramdisk=ext4load mmc ${bootpart} ${rdaddr}
${bootdir}/${ramdisk}\0" \
- "ramdisk=rootfs.ext2.gz.uboot\0" \
- "ramdisk_size=16384\0" \
- "ramroot=/dev/ram rw\0" \
- "ramrootfstype=ext2\0" \
- "ramargs=run defaultargs; setenv bootargs console=${console} " \
- "${mtdparts} " \
- "${defargs} " \
- "${optargs} " \
- "root=${ramroot} ramdisk_size=${ramdisk_size} " \
- "rootfstype=${ramrootfstype}\0" \
- "ramboot=run mmcbootenv; " \
- "if run loadimage && run loaddtb && run loadramdisk; then " \
- "echo Booting ${bootdir}/${bootfile} from mmc
${bootpart} w/ramdisk ...; " \
- "run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \
- "fi\0" \
- BOOTENV
-
-#endif /* __CONFIG_H */
--
2.34.1
