Hi Simon, Thank you for the patch.
On mar., juil. 16, 2024 at 08:04, Simon Glass <s...@chromium.org> wrote: > Add documentation for the script bootmeth. > > Signed-off-by: Simon Glass <s...@chromium.org> > Reviewed-by: Quentin Schulz <quentin.sch...@cherry.de> Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> > --- > > Changes in v2: > - Adjustments from Heinrich's comments > > doc/develop/bootstd/index.rst | 1 + > doc/develop/bootstd/overview.rst | 2 +- > doc/develop/bootstd/script.rst | 52 ++++++++++++++++++++++++++++++++ > 3 files changed, 54 insertions(+), 1 deletion(-) > create mode 100644 doc/develop/bootstd/script.rst > > diff --git a/doc/develop/bootstd/index.rst b/doc/develop/bootstd/index.rst > index 2c5d2d3fade..9d35b567d55 100644 > --- a/doc/develop/bootstd/index.rst > +++ b/doc/develop/bootstd/index.rst > @@ -11,4 +11,5 @@ Standard Boot > pxelinux > qfw > cros > + script > sandbox > diff --git a/doc/develop/bootstd/overview.rst > b/doc/develop/bootstd/overview.rst > index add054f3088..e4924b55ae7 100644 > --- a/doc/develop/bootstd/overview.rst > +++ b/doc/develop/bootstd/overview.rst > @@ -414,7 +414,7 @@ Bootmeth drivers are provided for booting from various > media: > > - :doc:`extlinux / syslinux <extlinux>` boot from a storage device > - :doc:`extlinux / syslinux <extlinux>` boot from a network (PXE) > - - U-Boot scripts from disk, network or SPI flash > + - :doc:`U-Boot scripts <script>` from disk, network or SPI flash > - EFI boot using bootefi from disk > - VBE > - :doc:`ChromiumOS <cros>` ChromiumOS boot from a disk > diff --git a/doc/develop/bootstd/script.rst b/doc/develop/bootstd/script.rst > new file mode 100644 > index 00000000000..58ddc1cae1d > --- /dev/null > +++ b/doc/develop/bootstd/script.rst > @@ -0,0 +1,52 @@ > +.. SPDX-License-Identifier: GPL-2.0+: > + > +Script Bootmeth > +=============== > + > +This bootmeth provides a way to locate and run a script on a block or network > +device. It can also support SPI flash. > + > +For a block device the file is read from the selected partition, which must > use > +a supported filesystem. The subdirectory to search in is defined by the > bootstd > +list of prefixes ({"/", "/boot"} by default) and can be adjust with the > +`filename-prefixes` property in the bootstd device. > + > +For a network device, the filename is obtained from the `boot_script_dhcp` > +environment variable and the file is read using tftp. It must be in the > +top-level directory of the tftp server. > + > +In either case (file or network), the bootmeth searches for the file and > creates > +a bootflow if found. The bootmeth searches for "boot.scr.uimg" first, then > +"boot.scr" if not found. > + > +For SPI flash, a script is read from flash using the offset provided by the > +"script_offset_f" environment variable. > + > +Some attempt is made to identify the Operating System: so far this only > detects > +an `Armbian <https://www.armbian.com>`_ > +distro. For block devices, if a file called "boot.bmp" exists in the same > +directory then it is used as the bootflow logo. > + > +When the bootflow is booted, the bootmeth sets these environment variables: > + > + devtype > + device type (e.g. "usb", "mmc", "ethernet" or "spi_flash") > + > + devnum > + device number, corresponding to the device 'sequence' number > + `dev_seq(dev)` > + > + distro_bootpart > + (block devices only) partition number on the device (numbered from 1) > + > + prefix > + prefix used to find the file > + > + mmc_bootdev > + device number (same as `devnum`), set for sunxi mmc devices only > + > +The script file must be a FIT or a legacy uImage. It is loaded into memory > and > +executed. > + > +The compatible string "u-boot,script" is used for the driver. It is present > +if `CONFIG_BOOTMETH_SCRIPT` is enabled. > -- > 2.34.1