On Tue, Jul 16, 2024 at 11:16:27AM +0200, Richard Weinberger wrote: > Hi! > > While inspecting various security aspects of U-Boot I noticed some > issues around dlmalloc and asking for your feedback, especially for the > first issue. > I'm CC'ing Barebox folks since Barebox seems to be based on the same > dlmalloc-implementation as U-Boot does.
Thanks for digging in to all of this. > 1. Integer Overflow While Computing Allocation Size > > malloc/realloc/memalign take an arbitrary request size and apply > padding. > > First, the length is (imperfectly) checked and the the conversion happens: > > if ((long)bytes < 0) return NULL; > > nb = request2size(bytes); /* padded request size; */ > > The problem is that the request2size() macro is casting the requested > size to an signed long and adds SIZE_SZ + MALLOC_ALIGN_MASK: > > #define request2size(req) \ > (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \ > (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \ > (((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK))) > > So, any allocation request between LONG_MAX - (SIZE_SZ + MALLOC_ALIGN_MASK) - > 1 and LONG_MAX > will cause an overflow and as a consequence the caller will get > less memory than requested. > > e.g. on an 32bits system malloc(2147483647) will succeed but allocates > only 16 bytes (MINSIZE). I've tested this with U-Boot on i386 and ARM. > > This is a beefy vulnerability for exploit writers since unbound allocations > do happen. Like in the ext4 and squashfs symlink code, I'm sure there are > more. > If you don't care about verified boot, it's less of an issue, though. > > I'm not so sure what the best fix is. > Mostly because I'm not sure why request2size() is anyway casting to long. > The original dlmalloc.c implementation doesn't do so. It has also a more > sophisticated overflow check, which is also missing in both U-Boot and > Barebox. > See > https://research.cs.wisc.edu/sonar/projects/mnemosyne/resources/doc/html/malloc-original_2src_2dlmalloc_8c-source.html > Lines 01938 to 01962. > > I tracked down the bug to ppcboot, it's there since day 0. > So I don't know what's the intention behind casting. > > On the other hand, since over commit is not supported, we could also just fail > if the requested size is larger then the total amount of system memory. > I'm a little in fear that more overflows are lurking in the code. The "why" is likely lost due to time and I could only speculate and wave my hands about funny compiler issues at the time. Since we don't support overcommit, I'd be inclined to go with just failing if we're exceeding SYS_MALLOC_LEN. > 2. Integer overflow in sbrk() (U-Boot only) > > sbrk() does: > ulong new = old + increment; > > /* > * if we are giving memory back make sure we clear it out since > * we set MORECORE_CLEARS to 1 > */ > if (increment < 0) > memset((void *)new, 0, -increment); > > if ((new < mem_malloc_start) || (new > mem_malloc_end)) > return (void *)MORECORE_FAILURE; > > > If old + increment overflows (increment is a ptrdiff_t) then > sbrk() wrongly thinks we're shrinking the heap and memsets an invalid > range. > > I propose as solution, applying memset() after the range check. OK, sounds good. > 3. Wrong ptrdiff_t type (U-Boot only) > > U-Boot defines __kernel_ptrdiff_t to int for both i386 and x86_64. > As a consequence, large allocations on x86_64 will overflow the increment > parameter of sbrk() and less than requested is allocated. > I suggest defining __kernel_ptrdiff_t on x86_64 to long. OK, sounds good. -- Tom
signature.asc
Description: PGP signature
