The pcie1ln_sel bits for the RK3588 are getting set but not cleared due
to an incorrect write mask.
Use a newly introduced constant for the write mask to fix this.
Also introduce a GENMASK-based constant for PCIE30_PHY_MODE.

This fix is adapted from the upstream Linux commit by Sebastian Reichel:
55491a5fa163 ("phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits")

Fixes: 50e54e80679b ("phy: rockchip: snps-pcie3: Add support for RK3588")
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-...@mail.de>
---
 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c 
b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index fadb77c25c..62b42d1805 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -36,6 +36,8 @@
 #define RK3588_BIFURCATION_LANE_0_1            BIT(0)
 #define RK3588_BIFURCATION_LANE_2_3            BIT(1)
 #define RK3588_LANE_AGGREGATION                        BIT(2)
+#define RK3588_PCIE1LN_SEL_EN                  (GENMASK(1, 0) << 16)
+#define RK3588_PCIE30_PHY_MODE_EN              (GENMASK(2, 0) << 16)
 
 /**
  * struct rockchip_p3phy_priv - RK DW PCIe PHY state
@@ -127,13 +129,13 @@ static int rockchip_p3phy_rk3588_init(struct phy *phy)
 
        reg = mode;
        regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0,
-                    (0x7 << 16) | reg);
+                    RK3588_PCIE30_PHY_MODE_EN | reg);
 
        /* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
-       reg = mode & 3;
+       reg = mode & (RK3588_BIFURCATION_LANE_0_1 | 
RK3588_BIFURCATION_LANE_2_3);
        if (reg)
                regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
-                            (reg << 16) | reg);
+                            RK3588_PCIE1LN_SEL_EN | reg);
 
        reset_deassert(&priv->p30phy);
        udelay(1);
-- 
2.43.0

Reply via email to