[PATCH v2 5/9] include: env: phytec: renaming of variables according to bootstd doc

[Daniel Schultz]

From: Benjamin Hahn <b.h...@phytec.de>

Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr.

Signed-off-by: Benjamin Hahn <b.h...@phytec.de>
Signed-off-by: Daniel Schultz <d.schu...@phytec.de>
Reviewed-by: Wadim Egorov <w.ego...@phytec.de>
---
 include/env/phytec/overlays.env | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/include/env/phytec/overlays.env b/include/env/phytec/overlays.env
index febb991f4f5..78721cde654 100644
--- a/include/env/phytec/overlays.env
+++ b/include/env/phytec/overlays.env
@@ -6,32 +6,33 @@
 
 /* Logic to load and apply overlays. Load overlays from bootenv.txt into
  * environment and apply those overlays.
- * The variables bootenv_addr and fdto_addr are board specific. */
+ * The variables bootenv_addr_r and fdtoverlay_addr_r are board specific.
+ * get_cmd can be either tftp or dhcp. */
 
 bootenv=bootenv.txt
-mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
-mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr_r} ${bootenv}
+mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdtoverlay_addr_r} ${overlay}
 mmc_apply_overlays=
-       fdt address ${fdt_addr};
+       fdt address ${fdt_addr_r};
        if test ${no_overlays} = 0; then
                for overlay in ${overlays};
                do;
                        if run mmc_load_overlay; then
                                fdt resize ${filesize};
-                               fdt apply ${fdto_addr};
+                               fdt apply ${fdtoverlay_addr_r};
                        fi;
                done;
        fi;
-net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
-net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_load_bootenv=${get_cmd} ${bootenv_addr_r} ${bootenv}
+net_load_overlay=${get_cmd} ${fdtoverlay_addr_r} ${overlay}
 net_apply_overlays=
-       fdt address ${fdt_addr};
+       fdt address ${fdt_addr_r};
        if test ${no_overlays} = 0; then
                for overlay in ${overlays};
                do;
                        if run net_load_overlay; then
                                fdt resize ${filesize};
-                               fdt apply ${fdto_addr};
+                               fdt apply ${fdtoverlay_addr_r};
                        fi;
                done;
        fi;
-- 
2.25.1