On Wed, Jul 17, 2024 at 11:59:50AM +0100, Peter Robinson wrote: > On Tue, 16 Jul 2024 at 18:21, Tom Rini <tr...@konsulko.com> wrote: > > > > On Tue, Jul 16, 2024 at 02:16:02PM -0300, Walter Lozano wrote: > > > > > ARM and Aarch64 have different restrictions and trying to accommodate > > > larger kernels like the ones used in distros can be challenging. For this > > > reason, separate the layout and rearrange the map for Aarch64 to support > > > kernels larger than 36 MB. > > > > > > Signed-off-by: Walter Lozano <walter.loz...@collabora.com> > > > --- > > > > > > board/raspberrypi/rpi/rpi.env | 25 ++++++++++++++++++------- > > > 1 file changed, 18 insertions(+), 7 deletions(-) > > > > > > diff --git a/board/raspberrypi/rpi/rpi.env b/board/raspberrypi/rpi/rpi.env > > > index 30228285edd..37c7f6a920e 100644 > > > --- a/board/raspberrypi/rpi/rpi.env > > > +++ b/board/raspberrypi/rpi/rpi.env > > > @@ -42,13 +42,19 @@ dfu_alt_info+=zImage fat 0 1 > > > * For Aarch64, the kernel image is uncompressed and must be loaded at > > > * text_offset bytes (specified in the header of the Image) into a 2MB > > > * boundary. The 'booti' command relocates the image if necessary. > > > Linux uses > > > - * a default text_offset of 0x80000. In summary, loading at 0x80000 > > > - * satisfies all these constraints and reserving memory up to > > > 0x02400000 > > > - * permits fairly large (roughly 36M) kernels. > > > + * a default text_offset of 0x80000. However, loading it at 0x80000 > > > + * will allow to reserve only up to 0x02400000 which permits medium > > > size > > > + * kernels (roughly 36M). This is good enough for customized kernels > > > but > > > + * not for distros which by default enable drivers for many different > > > + * boards. Under these circumstances, using 0x00200000 provides room > > > for > > > + * larger kernels. > > > * > > > * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't > > > * conflict with something else. Reserving 1M for each of them at > > > - * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty. > > > + * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty for > > > ARM. > > > + * > > > + * For Aarch64, since the kernel is placed in different location, > > > + * accommodate them to reserver 1M for each of them. > > > * > > > * On ARM, both the DTB and any possible initrd must be loaded such that > > > they > > > * fit inside the lowmem mapping in Linux. In practice, this usually > > > means not > > > @@ -62,16 +68,21 @@ dfu_alt_info+=zImage fat 0 1 > > > * large initrds before they start colliding with U-Boot. > > > */ > > > #ifdef CONFIG_ARM64 > > > +pxefile_addr_r=0x00080000 > > > +scriptaddr=0x00100000 > > > +kernel_addr_r=0x00200000 > > > +fdt_addr_r=0x03400000 > > > +ramdisk_addr_r=0x03500000 > > > fdt_high=ffffffffffffffff > > > initrd_high=ffffffffffffffff > > > #else > > > -fdt_high=ffffffff > > > -initrd_high=ffffffff > > > -#endif > > > kernel_addr_r=0x00080000 > > > scriptaddr=0x02400000 > > > pxefile_addr_r=0x02500000 > > > fdt_addr_r=0x02600000 > > > ramdisk_addr_r=0x02700000 > > > +fdt_high=ffffffff > > > +initrd_high=ffffffff > > > +#endif > > > > > > boot_targets=mmc usb pxe dhcp > > > > We need to drop the disabling of device tree / initrd relocation as > > that's sure not going to help matters. What's the minimum amount of > > memory an aarch64 Pi will have? I really prefer reserving 128MiB (even > > if that's not the maximum Linux Kernel Image size anymore) and then > > device tree and then initrd. > > 512Mb on the Zero2W and RPi3A. > > We've not seen an issue here on the very large Fedora kernel, but I > suspect that's because using UEFI mitigates this somewhat because here > we're actually loading shim/grub.
OK, that should be enough to put a 128MiB spot for kernel, then 512KiB for device tree, and then rest for initrd, and not be disabling relocation (and thus preventing U-Boot from fixing failures). -- Tom
signature.asc
Description: PGP signature