Currently, there is an error when the i.MX93 CPU frequency is read: Could not read CPU frequency: -2 CPU: NXP i.MX93(52) Rev1.1 A55 at 0 MHz
Fix it by describing the A55 clock nodes in the devicetree, like done on other i.MX SoCs. With this change, the CPU frequency error is gone and it can be correctly retrieved: CPU: NXP i.MX93(52) Rev1.1 A55 at 1700 MHz CPU: Industrial temperature grade (-40C to 105C) at 35C As the upstream imx93.dtsi does not describe the CPU clocks, keep the clock node in imx93-u-boot.dtsi for now. Signed-off-by: Fabio Estevam <feste...@gmail.com> --- arch/arm/dts/imx93-u-boot.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/dts/imx93-u-boot.dtsi b/arch/arm/dts/imx93-u-boot.dtsi index 289aba175843..b2b3d57318fc 100644 --- a/arch/arm/dts/imx93-u-boot.dtsi +++ b/arch/arm/dts/imx93-u-boot.dtsi @@ -9,6 +9,14 @@ }; }; +&A55_0 { + clocks = <&clk IMX93_CLK_ARM_PLL>; +}; + +&A55_1 { + clocks = <&clk IMX93_CLK_ARM_PLL>; +}; + &binman { u-boot-spl-ddr { align = <4>; -- 2.34.1