On Mon, 22 Jul 2024 at 22:31, Raymond Mao <raymond....@linaro.org> wrote: > > Recently we are introducing multiple git subtree projects and > it is the right time to have a universal script to update > various subtrees and replace the dts/update-dts-subtree.sh. > > update-subtree.sh is a wrapper of git subtree commands. > > Usage: From U-Boot top directory, > run > $ ./tools/update-subtree.sh pull <subtree-name> <release-tag> > for pulling a tag from the upstream. > Or run > $ ./tools/update-subtree.sh pick <subtree-name> <commit-id> > for cherry-pick a commit from the upstream. > > Currently <subtree-name> supports dts, mbedtls and lwip. > > Signed-off-by: Raymond Mao <raymond....@linaro.org> > --- > Changes in v2 > - Refactored the script. > - Update the control doc. > > doc/develop/devicetree/control.rst | 8 +-- > dts/update-dts-subtree.sh | 48 ----------------- > tools/update-subtree.sh | 86 ++++++++++++++++++++++++++++++ > 3 files changed, 90 insertions(+), 52 deletions(-) > delete mode 100755 dts/update-dts-subtree.sh > create mode 100755 tools/update-subtree.sh > > diff --git a/doc/develop/devicetree/control.rst > b/doc/develop/devicetree/control.rst > index ca4fb0b5b10..211f7e4909c 100644 > --- a/doc/develop/devicetree/control.rst > +++ b/doc/develop/devicetree/control.rst > @@ -96,12 +96,12 @@ sync the `dts/upstream/` subtree from the > devicetree-rebasing repo whenever > the next branch opens (refer: :doc:`../release_cycle`) with the latest > mainline > Linux kernel release. To sync the `dts/upstream/` subtree, run:: > > - ./dts/update-dts-subtree.sh pull <devicetree-rebasing-release-tag> > + ./tools/update-subtree.sh pull dts <devicetree-rebasing-release-tag> > > If required it is also possible to cherry-pick fixes from the > devicetree-rebasing repository prior to next sync, usage:: > > - ./dts/update-dts-subtree.sh pick <devicetree-rebasing-commit-id> > + ./tools/update-subtree.sh pick dts <devicetree-rebasing-commit-id> > > > Configuration > @@ -116,8 +116,8 @@ However, if `dts/upstream/` hasn't yet received > devicetree source file for your > newly added board support then one option is that you can add the > corresponding > devicetree source file as `arch/<arch>/dts/<name>.dts`. To select that add `# > CONFIG_OF_UPSTREAM is not set` and set `DEFAULT_DEVICE_TREE=<name>` when > -prompted by Kconfig. Another option is that you can use use the "pick" > option of > -`dts/update-dts-subtree.sh` mentioned above to bring in the commits that you > +prompted by Kconfig. Another option is that you can use the "pick" option of > +`tools/update-subtree.sh` mentioned above to bring in the commits that you > need. > > This should include your CPU or SoC's devicetree file. On top of that any > U-Boot > diff --git a/dts/update-dts-subtree.sh b/dts/update-dts-subtree.sh > deleted file mode 100755 > index a57b78a41d3..00000000000 > --- a/dts/update-dts-subtree.sh > +++ /dev/null > @@ -1,48 +0,0 @@ > -#!/bin/sh > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# Copyright 2024 Linaro Ltd. > -# > -# Usage: from the top level U-Boot source tree, run: > -# $ ./dts/update-dts-subtree.sh pull <release-tag> > -# $ ./dts/update-dts-subtree.sh pick <commit-id> > -# > -# The script will pull changes from devicetree-rebasing repo into U-Boot > -# as a subtree located as <U-Boot>/dts/upstream sub-directory. It will > -# automatically create a squash/merge commit listing the commits imported. > - > -set -e > - > -merge_commit_msg=$(cat << EOF > -Subtree merge tag '$2' of devicetree-rebasing repo [1] into dts/upstream > - > -[1] > https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/ > -EOF > -) > - > -remote_add_and_fetch() { > - if ! git remote get-url devicetree-rebasing 2>/dev/null > - then > - echo "Warning: Script automatically adds new git remote via:" > - echo " git remote add devicetree-rebasing \\" > - echo " > https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git"; > - git remote add devicetree-rebasing \ > - > https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git > - fi > - git fetch devicetree-rebasing master > -} > - > -if [ "$1" = "pull" ] > -then > - remote_add_and_fetch > - git subtree pull --prefix dts/upstream devicetree-rebasing \ > - "$2" --squash -m "${merge_commit_msg}" > -elif [ "$1" = "pick" ] > -then > - remote_add_and_fetch > - git cherry-pick -x --strategy=subtree -Xsubtree=dts/upstream/ "$2" > -else > - echo "usage: $0 <op> <ref>" > - echo " <op> pull or pick" > - echo " <ref> release tag [pull] or commit id [pick]" > -fi > diff --git a/tools/update-subtree.sh b/tools/update-subtree.sh > new file mode 100755 > index 00000000000..5946aa1a9e2 > --- /dev/null > +++ b/tools/update-subtree.sh > @@ -0,0 +1,86 @@ > +#!/bin/sh > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (c) 2024 Linaro Limited > +# Author: Raymond Mao <raymond....@linaro.org> > +# > +# Usage: from the top level U-Boot source tree, run: > +# $ ./tools/update-subtree.sh pull <subtree-name> <release-tag> > +# Or: > +# $ ./tools/update-subtree.sh pick <subtree-name> <commit-id> > +# > +# The script will pull changes from subtree repo into U-Boot. > +# It will automatically create a squash/merge commit listing the commits > +# imported. > + > +set -e > + > +print_usage() { > + echo "usage: $0 <op> <subtree-name> <ref>" > + echo " <op> pull or pick" > + echo " <subtree-name> mbedtls or dts or lwip" > + echo " <ref> release tag [pull] or commit id [pick]" > +} > + > +if [ $# -ne 3 ]; then > + print_usage > + exit 1 > +fi > + > +op=$1 > +subtree_name=$2 > +ref=$3 > + > +set_params() { > + case "$subtree_name" in > + mbedtls) > + path=lib/mbedtls/external/mbedtls > + repo_url=https://github.com/Mbed-TLS/mbedtls.git > + remote_name="mbedtls_upstream" > + ;; > + dts) > + path=dts/upstream > + > repo_url=https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git > + remote_name="devicetree-rebasing" > + ;; > + lwip) > + path=lib/lwip/lwip > + repo_url=https://git.savannah.gnu.org/git/lwip.git > + remote_name="lwip_upstream" > + ;; > + *) > + echo "Invalid subtree name: $subtree_name" > + print_usage > + exit 1 > + esac > +} > + > +set_params > + > +merge_commit_msg=$(cat << EOF > +Subtree merge tag '$ref' of $subtree_name repo [1] into $path > + > +[1] $repo_url > +EOF > +) > + > +remote_add_and_fetch() { > + if [ -z "$(git remote get-url $remote_name 2>/dev/null)" ]; then > + echo "Warning: Script automatically adds new git remote via:" > + echo " git remote add $remote_name \\" > + echo " $repo_url" > + git remote add $remote_name $repo_url > + fi > + git fetch $remote_name master > +} > + > +if [ "$op" = "pull" ]; then > + remote_add_and_fetch > + git subtree pull --prefix $path $remote_name "$ref" --squash -m > "$merge_commit_msg" > +elif [ "$op" = "pick" ]; then > + remote_add_and_fetch > + git cherry-pick -x --strategy=subtree -Xsubtree=$path/ "$ref" > +else > + print_usage > + exit 1 > +fi > -- > 2.25.1 >
Acked-by: Ilias Apalodimas <ilias.apalodi...@linaro.org>
