Hi Michael, On Tue, Jul 23, 2024 at 10:37 AM Stahl, Michael <mst...@moba.de> wrote: > > Hi, > after I swichted to the new uboot (2024.01) I can't flash a wic-file to the > emmc anymore.
Not so new :-) 2024.07 is the new one. > I use a uboot version for imx8 processors but I think the fastboot parts are > equal. There is a special tool supported from NXP called uuu-tool to flash > files by the fastboot protocol Which i.MX8 processor do you use exactly? > With the old uboot (2021.04) I can flash the uboot-image as the wic-image as > follows: Is the old U-Boot based on a NXP release? > Which fastboot command can I use to flash the raw emmc regardless of whether > there are already partitions or not? The scripts you showed should also work with mainline U-Boot. Have you added fastboot support to your board in U-Boot 2024.01? Also, does it enter fastboot mode when booting from USB? Here are some suggestions: https://lore.kernel.org/u-boot/caomzo5bb9c+9-gj22lnvlggqbh259h7iuff5jind3ledpan...@mail.gmail.com/ Regards, Fabio Estevam