With the emmc and uart0 DT nodes updated to v6.11-rc1 in dts/upstream
there is no longer any need to keep overrides in board u-boot dtsi.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
index a6fb8b12da38..ff5bab316a34 100644
--- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
@@ -4,17 +4,6 @@
*/
#include "rk3308-u-boot.dtsi"
-&emmc {
- cap-sd-highspeed;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus4>;
-};
-
-&emmc_bus4 {
- bootph-pre-ram;
- bootph-some-ram;
-};
-
&u2phy_otg {
/delete-property/ phy-supply;
};
@@ -24,14 +13,6 @@
clock-frequency = <24000000>;
};
-&uart0_cts {
- bootph-all;
-};
-
-&uart0_rts {
- bootph-all;
-};
-
&uart0_xfer {
bootph-all;
};
--
2.45.2
