UART pinctrl for serial is typically applied multiple times: - in external TPL - in SPL using pinctrl from DT - in pre-reloc phase using pinctrl from DT - after relocation using pinctrl from DT
Skip including UART pinctrl for the pre-reloc phase to save time during boot. On a Radxa ROCK Pi S this reduce boot time by ~80 ms. After this a warning may be shown with LOGLEVEL=5 (or higher), it is safe to ignore this warning as device probe is successful even when pinctrl cannot be applied: ns16550_serial serial@ff0a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 Signed-off-by: Jonas Karlman <jo...@kwiboo.se> --- arch/arm/dts/rk3308-evb-u-boot.dtsi | 3 ++- arch/arm/dts/rk3308-roc-cc-u-boot.dtsi | 3 ++- arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 3 ++- arch/arm/dts/rk3308-rock-s0-u-boot.dtsi | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/rk3308-evb-u-boot.dtsi b/arch/arm/dts/rk3308-evb-u-boot.dtsi index 007a69f9a60e..ce826667dcc2 100644 --- a/arch/arm/dts/rk3308-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3308-evb-u-boot.dtsi @@ -10,5 +10,6 @@ }; &uart4_xfer { - bootph-all; + bootph-pre-sram; + bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi index 3e01e7af6113..72b6f223838b 100644 --- a/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi +++ b/arch/arm/dts/rk3308-roc-cc-u-boot.dtsi @@ -29,7 +29,8 @@ }; &uart2m0_xfer { - bootph-all; + bootph-pre-sram; + bootph-pre-ram; }; &vcc_sd { diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi index ff5bab316a34..3059a0246086 100644 --- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi +++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi @@ -14,7 +14,8 @@ }; &uart0_xfer { - bootph-all; + bootph-pre-sram; + bootph-pre-ram; }; &vcc5v0_otg { diff --git a/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi index 84ca2ee0d5fb..dd4cb8660b8d 100644 --- a/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi +++ b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi @@ -13,7 +13,8 @@ }; &uart0_xfer { - bootph-all; + bootph-pre-sram; + bootph-pre-ram; }; &vdd_core { -- 2.45.2