Hi,
On 8/9/24 04:37, Maxim Moskalets wrote:
From: Maxim Moskalets <maximmo...@gmail.com>
Based on rock-3a-rk3568_defconfig.
Tested on v1.31 revision.
Board Specifications:
- Rockchip RK3566
- 1/2/4GB LPDDR4 2112MT/s
- eMMC socket
- uSD card slot
- M.2 2230 Connector
- GbE LAN with POE
- 3.5mm jack with mic
- HDMI 2.0, MIPI DSI/CSI
- USB 3.0 Host, USB 2.0 Host/OTG
- 40-pin GPIO expansion ports
Signed-off-by: Maxim Moskalets <maximmo...@gmail.com>
Suggested-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Jonas Karlman <jo...@kwiboo.se>
I got following error when `usb start` and `usb reset`
```
Bus usb@fcc00000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd840000: USB OHCI 1.0
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fcc00000 for devices... 1 USB Device(s) found
scanning bus usb@fd000000 for devices... 1 USB Device(s) found
scanning bus usb@fd800000 for devices... 1 USB Device(s) found
scanning bus usb@fd840000 for devices... ERROR: USB-error:
DEVICENOTRESPONDING: Device did not respond to token (IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token
(IN) or did
not provide a handshake (OUT) (5)
unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning bus usb@fd880000 for devices... 1 USB Device(s) found
scanning bus usb@fd8c0000 for devices... 1 USB Device(s) found
```
but it happens only when no USB device is connected at usb@fd840000
(upper right port). if some device is connected, it doesn't happen,
device is recognized properly.
if it's okay,
Tested-by: FUKAUMI Naoki <na...@radxa.com>
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
v6:
update dts to turn LED up in U-Boot
v5:
fixed board info
v4:
fixed typo in commit-msg
moved maintainers record to file for rk3568 boards
renamed from ROCK 3 Model C to ROCK3C
v3:
add suggested by Jonas Karlman <jo...@kwiboo.se> in
https://lore.kernel.org/all/bbb81dd1-e318-423d-8258-db7556ce6...@kwiboo.se/
v2:
rebase to updated upstream dts
---
arch/arm/dts/rk3566-rock-3c-u-boot.dtsi | 18 +++++
board/rockchip/evb_rk3568/MAINTAINERS | 7 ++
configs/rock-3c-rk3566_defconfig | 97 +++++++++++++++++++++++++
doc/board/rockchip/rockchip.rst | 1 +
4 files changed, 123 insertions(+)
create mode 100644 arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
create mode 100644 configs/rock-3c-rk3566_defconfig
diff --git a/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
new file mode 100644
index 00000000000..f4124aa48fc
--- /dev/null
+++ b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
+
+/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+ };
+};
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS
b/board/rockchip/evb_rk3568/MAINTAINERS
index e5b0986ead9..ba4884db8e1 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -69,3 +69,10 @@ S: Maintained
F: configs/rock-3a-rk3568_defconfig
F: arch/arm/dts/rk3568-rock-3a.dts
F: arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+
+ROCK-3C
+M: Jonas Karlman <jo...@kwiboo.se>
+M: Maxim Moskalets <maximmo...@gmail.com>
+S: Maintained
+F: arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
+F: configs/rock-3c-rk3566_defconfig
diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
new file mode 100644
index 00000000000..f44b202c8c3
--- /dev/null
+++ b/configs/rock-3c-rk3566_defconfig
@@ -0,0 +1,97 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-rock-3c.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=4
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index bedc52e03e2..60357af6caa 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -105,6 +105,7 @@ List of mainline supported Rockchip boards:
- Pine64 SOQuartz on Model A (soquartz-model-a-rk3566)
- Powkiddy X55 (powkiddy-x55-rk3566)
- Radxa CM3 IO Board (radxa-cm3-io-rk3566)
+ - Radxa ROCK 3C (rock-3c-rk3566)
* rk3568
- Rockchip Evb-RK3568 (evb-rk3568)
