On 2024/7/30 22:27, Jonas Karlman wrote:
The merged upstream DT node for OTP differs in nodename and will cause
following build errors once rk3308.dtsi in dts/upstream is updated:
ERROR (duplicate_label): /nvmem@ff210000: Duplicate label 'otp' on
/nvmem@ff210000 and /efuse@ff210000
ERROR (duplicate_label): /nvmem@ff210000/id@7: Duplicate label 'cpu_id' on
/nvmem@ff210000/id@7 and /efuse@ff210000/id@7
Remove the OTP device node from soc u-boot dtsi in preparation for
replacing it with the merged upstream DT node in dts/upstream.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
v2: New patch
---
arch/arm/dts/rk3308-u-boot.dtsi | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/arch/arm/dts/rk3308-u-boot.dtsi b/arch/arm/dts/rk3308-u-boot.dtsi
index 684fa7abddb1..b7964e2756f3 100644
--- a/arch/arm/dts/rk3308-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-u-boot.dtsi
@@ -21,22 +21,6 @@
bootph-all;
};
- otp: nvmem@ff210000 {
- compatible = "rockchip,rk3308-otp";
- reg = <0x0 0xff210000 0x0 0x4000>;
- clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
- <&cru PCLK_OTP_PHY>;
- clock-names = "otp", "apb_pclk", "phy";
- resets = <&cru SRST_OTP_PHY>;
- reset-names = "phy";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpu_id: id@7 {
- reg = <0x07 0x10>;
- };
- };
-
rng: rng@ff2f0000 {
compatible = "rockchip,cryptov2-rng";
reg = <0x0 0xff2f0000 0x0 0x4000>;