This series enables Ethernet Boot on SK-AM62 device. This series is based on commit 'f4f845b85926' of origin/next branch of U-Boot.
Link to v3: https://lore.kernel.org/r/20240705045030.1141934-1-c-van...@ti.com/ Logs for Ethernet Boot for AM625-SK: https://gist.github.com/chintanv133/07bcb1473301581aab6d4e951d9c6572 Changes from v3 to v4: - Updated config files by enabling architecture specific configs and default device tree config to fix buildman failure as pointed by Tom. - Updated [PATCH v3 10/10] by syncing "k3-am62x-sk-common.dtsi" file with Linux v6.11-rc3. Chintan Vankar (2): common: spl: spl: Init DRAM size in R5/A53 SPL dts: upstream: src: arm64: ti: k3-am62x-sk-common: Sync DT with Linux v6.11-rc3 Kishon Vijay Abraham I (6): firmware: ti_sci: Add No-OP for "RX_FL_CFG" soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers dma: ti: k3-udma: Add support for native configuration of chan/flow arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS configs: am62: Add configs for enabling ETHBOOT in R5SPL configs: am62: Enable configs required for Ethboot Siddharth Vadapalli (1): arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma Vignesh Raghavendra (1): soc: ti: k3-navss-ringacc: Fix reset ring API arch/arm/dts/k3-am625-r5-sk.dts | 5 +++ arch/arm/mach-k3/am62x/am625_init.c | 10 ++++++ common/spl/spl.c | 2 +- configs/am62x_evm_a53_ethboot_defconfig | 17 ++++++++++ configs/am62x_evm_r5_ethboot_defconfig | 25 +++++++++++++++ drivers/dma/ti/k3-udma.c | 6 ++++ drivers/firmware/ti_sci.c | 8 ++++- drivers/soc/ti/k3-navss-ringacc-u-boot.c | 9 +++++- drivers/soc/ti/k3-navss-ringacc.c | 17 +++++++++- .../src/arm64/ti/k3-am62x-sk-common.dtsi | 32 ++++++++++--------- 10 files changed, 112 insertions(+), 19 deletions(-) create mode 100644 configs/am62x_evm_a53_ethboot_defconfig create mode 100644 configs/am62x_evm_r5_ethboot_defconfig -- 2.34.1
