-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 03/23/2011 12:10 AM, Scott Wood wrote: >> I have tried to move those 'usb_boot' to board files. the only problem is >> > I have to run this 'usb_boot' very early. after CPU load the real u-boot >> > to memory >> > the usb_boot will not working. I will try to found more info about this. >> > then explain more in next email. > OK, so you need to run it during the SPL phase -- but there should be > some board/cpu-specific file for the SPL (if not, create one). > > Current examples of this > include nand_spl/board/freescale/p1_p2_rdb/nand_boot.c and > arch/powerpc/cpu/mpc83xx/nand_init.c. > Hi Scott Wood
thanks for the info. for speed up I think I will remove the usbboot and nandboot SPL in those patches series. I am NOT SOTP working on that. I will try to implement them in next series patches and will include the mmc/lcd/nandSPL source code in next serial patches. thanks again. - -- Best Regards Xiangfu Liu http://www.openmobilefree.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk222lMACgkQRRAEFRxkgLSMaACgrOofX/zJNpNp1e1WvhTVyAl3 64kAoIvIx38HasmCmqer2FXzoKPKlagH =Qmft -----END PGP SIGNATURE----- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot