Hi, On Wed, 14 Aug 2024 at 22:14, Jan Kiszka <jan.kis...@siemens.com> wrote: > > On 14.08.24 11:41, Jan Kiszka wrote: > > On 13.08.24 14:52, Nishanth Menon wrote: > >> On 11:16-20240813, Jan Kiszka wrote: > >>> Hi all, > >>> > >>> I'm trying to migrate the TI AM65x IOT2050 boards to OF_UPSTREAM but I'm > >>> facing issues because I need to still build the u-boot-only overlays. It > >>> is also a bit weird (but works) having to specify > >>> > >>> CONFIG_SPL_OF_LIST="../../../../arch/arm/dts/k3-am65-iot2050-spl" > >>> > > > > Actually, this does NOT work: I just had a long morning debugging SPL > > which no longer started because it picked the non-filtered dtb. The > > filtered one ended up in a folder outside of the u-boot sources because > > of all those ../ and hard-wiring to dts/upstream. > > > >>> for our spl dtb. > >>> > >>> Are there means to still build certain dtb[o] files in arch/<arch>/dts? > >>> I'm a bit lost in the Makefile forest. > >>> > >> > >> Sumit: Any suggestions? > >>
Apologies for the delayed reply. I was a bit busy with other high priority stuff. > > > > I would really like to hear some better proposals than my local > > workarounds to far. They don't converge although I already patched some > > core Makefile (overlays are building now). > > > > OK, I side-stepped the spl issue by using one of our variant DTBs for > spl as well - happens to work. That's good to know. > > For the overlays, I need to add > > --- a/scripts/Makefile.dts > +++ b/scripts/Makefile.dts > @@ -1,5 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0+ > > +include $(srctree)/config.mk > + > dtb-y += $(patsubst %,%.dtb,$(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE) > $(CONFIG_OF_LIST) $(CONFIG_SPL_OF_LIST))) > > ifeq ($(CONFIG_OF_UPSTREAM_BUILD_VENDOR),y) > > > in order to then be able to do > > --- a/board/siemens/iot2050/config.mk > +++ b/board/siemens/iot2050/config.mk > @@ -5,4 +5,12 @@ > # Authors: > # Jan Kiszka <jan.kis...@siemens.com> > > +ifneq ($(CONFIG_SPL_BUILD),y) > +dtbo-list = \ > + k3-am6548-iot2050-advanced-m2-bkey-usb3-overlay \ > + k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay > + > +dtb-y += $(patsubst %,../../../../arch/arm/dts/%.dtbo,$(dtbo-list)) > +endif > + > flash.bin: all > > > Does that make sense? A switch to OF_UPSTREAM means that we build all the DT artifacts from dts/upstream/src/ directory with the only exception that we include U-Boot specific overrides via *-u-boot.dtsi from arch/<arch>/dts. In case of overlays, is there any reason for IOT2050 board overlays not being pushed into Linux kernel repo? AFAIU, overlays are also describing puggable hardware so they shouldn't be referred to as "u-boot-only" overlays. -Sumit > > Jan > > -- > Siemens AG, Technology > Linux Expert Center >
