On Tue, Sep 24, 2024 at 3:28 AM Peng Fan (OSS) <peng....@oss.nxp.com> wrote: > > From: Peng Fan <peng....@nxp.com> > > i.MX93 FEC ENET port supports two mode: RGMII and RMII. For RGMII, > there is an internal /2 divider, so the freq needs to set with (*2), > otherwise the speed will not reach 1G and cause communication error > in some network environments. For RMII, the clk path is > ccm -> enet tx_clk pin -> pad loop back to enet, no /2 divider. > > So fix for RGMII mode with freq multiplied by 2. > > Fixes: 09de565f76b ("net: fec_mxc: support i.MX93") > Signed-off-by: Ye Li <ye...@nxp.com> > Signed-off-by: Peng Fan <peng....@nxp.com> > --- > > V2: > only update freq to RGMII mode
Applied both to u-boot-imx/next, thanks.