From: Paul Kocialkowski <cont...@paulk.fr>
The reset mechanism used by Linux to reset the SoC is known to only
partially reset the logic. A mechanism is implemented in
rk3399_force_power_on_reset to use a GPIO connected to the PMIC's
over-temperature (OTP) reset pin, which fully resets all logic.
Hook the associated GPIO where the function expects it to enable this
reset mechanism and avoid any possible side-effect of partially-reset
units.
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
index 43b67991fe5a..cd84269dab48 100644
--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -7,6 +7,10 @@
#include "rk3399-sdram-lpddr4-100.dtsi"
/ {
+ config {
+ sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
+
smbios {
compatible = "u-boot,sysinfo-smbios";
smbios {
@@ -32,6 +36,10 @@
bootph-pre-ram;
};
+&gpio1 {
+ bootph-pre-ram;
+};
+
&sdhci {
cap-mmc-highspeed;
mmc-ddr-1_8v;
--
2.46.2
