Hi Heiko,

> >> I see with your patch the clock names, so fine... and see [1]
> >>
> >> Hmm... I am on imx8mp, and I think the changes the patchset do in
> >>
> >> "clk: imx8mn: Prevent clock critical path from disabling during reparent 
> >> and set_rate"
> >>
> >> are in clk-imx8mp already ...
> >>
> >> Ported the patch from patchset
> >>
> >> "[PATCH 05/26] clk: imx8mm: Mark IMX8MM_SYS_PLL2 and IMX8MM_SYS_PLL3 as 
> >> enabled"
> >>
> >> to imx8mp [2] and fec ethernet works again for me on imx8mp!
> >>
> >> Could you add this if you post a v2 ?  
> > 
> > TBH I don't feel like the below change is the correct one, it is too
> > specific. The clock core is recursive and thus should handle the
> > reparenting situations gracefully.
> > 
> > I posted a series that is targeting the LVDS output on imx8mp. You
> > should probably consider checking these patches as well if you work
> > on imx8mp as well. I also had similar breakages with Ethernet which
> > happened during the assigned-clocks handling. This patch, which is more
> > future and platform agnostic, fixed it:
> > 
> > https://lore.kernel.org/u-boot/20240910101344.110633-3-miquel.ray...@bootlin.com/
> >   
> 
> Yes, I also had such a "fix" first, before seeing Darios patchset!
> 
> Damn, I did not see your patches...
> 
> regarding your patch ... I am unsure which version is the best one ...
> I fear of side effects for other plattforms adding this change in
> generic "drivers/clk/clk-uclass.c" file...

FYI, this is the same approach as Linux. I don't expect any hardware
related breakage, however if people have already tried to workaround
the core's mistakes by doing more than expected in the SoC drivers,
maybe we will observe issues.

> > My series is complimentary, even though there are some overlaps that we
> > need to merge.  
> 
> I try to find time to test them on my board!

Sure, let me know if you have troubles, it's still fresh :-) I will
rework it a bit as it received already interesting feedback, and will
note to Cc you (as well as Dario/Michael) in v2.

Thanks,
Miquèl

Reply via email to