On Wed, Oct 02, 2024 at 04:55:34PM -0600, Simon Glass wrote: > Hi Patrick, > > On Wed, 2 Oct 2024 at 03:52, Patrick Rudolph > <patrick.rudo...@9elements.com> wrote: > > > > Add support for Arm sbsa [1] v0.3+ that is supported by QEMU [2]. > > > > Unlike other Arm based platforms the machine only provides a minimal > > FDT that contains number of CPUs, ammount of memory and machine-version. > > The boot firmware has to provide ACPI tables to the OS. > > Due to this design a full DTB is added here as well that allows U-Boot's > > driver to properly function. The DTB is appended at the end of the U-Boot > > image and will be merged with the QEMU provided DTB. > > > > In addition provide documentation how to use, enable binman to fabricate > > both > > ROMs that are required to boot and add ACPI tables to make it full > > compatible > > to the EDK2 reference implementation. > > > > The board was tested using Fedora 40 Aarch64 Workstation. It's able > > to boot from USB and AHCI or network. > > > > Tested and found working: > > - serial > > - PCI > > - xHCI > > - Bochs display > > - AHCI > > - network using e1000e > > - CPU init > > - Booting Fedora 40 > > > > 1: Server Base System Architecture (SBSA) > > 2: https://www.qemu.org/docs/master/system/arm/sbsa.html > > > > Signed-off-by: Patrick Rudolph <patrick.rudo...@9elements.com> > > Cc: Peter Robinson <pbrobin...@gmail.com> > > Cc: Simon Glass <s...@chromium.org> > > Cc: Tom Rini <tr...@konsulko.com> > > --- > > Changelog v3: > > - Add GIC and GIC-ITS to devicetree > > - Select GICv3 driver > > - Drop acpi_fill_madt and use driver model instead > > Changelog v4: > > - Drop CPU platform code > > - Enhance the DT to allow MADT generation from DT > > Changelog v5: > > - Add full DT and place it at the end of U-Boot > > - Merge DT with QEMU's DT > > - Drop DT generation code > > - Fix flash region length > > - Drop enable_caches() > > - Support platforms that do not pass FDT in x0 > > Changelog v6: > > - Update header order > > - Drop pad-byte from DT > > - select BINMAN_FDT > > - select E1000_NO_NVM > > - drop config.h include > > - drop a few CFG_ defines that were used for SPL > > > > --- > > arch/arm/Kconfig | 3 +- > > arch/arm/dts/qemu-sbsa.dts | 136 ++++++ > > arch/arm/include/asm/arch-qemu-sbsa/boot0.h | 34 ++ > > arch/arm/mach-qemu/Kconfig | 36 +- > > board/emulation/qemu-arm/MAINTAINERS | 2 + > > board/emulation/qemu-sbsa/Kconfig | 57 +++ > > board/emulation/qemu-sbsa/Makefile | 8 + > > board/emulation/qemu-sbsa/acpi.c | 192 ++++++++ > > board/emulation/qemu-sbsa/dsdt.asl | 483 ++++++++++++++++++++ > > board/emulation/qemu-sbsa/lowlevel_init.S | 22 + > > board/emulation/qemu-sbsa/qemu-sbsa.c | 311 +++++++++++++ > > board/emulation/qemu-sbsa/qemu-sbsa.env | 14 + > > board/emulation/qemu-sbsa/qemu-sbsa.h | 38 ++ > > board/emulation/qemu-sbsa/smc.c | 71 +++ > > configs/qemu-arm-sbsa_defconfig | 10 + > > doc/board/emulation/index.rst | 1 + > > doc/board/emulation/qemu-sbsa.rst | 98 ++++ > > doc/develop/driver-model/virtio.rst | 1 + > > include/configs/qemu-sbsa.h | 95 ++++ > > 19 files changed, 1605 insertions(+), 7 deletions(-) > > create mode 100644 arch/arm/dts/qemu-sbsa.dts > > create mode 100644 arch/arm/include/asm/arch-qemu-sbsa/boot0.h > > create mode 100644 board/emulation/qemu-sbsa/Kconfig > > create mode 100644 board/emulation/qemu-sbsa/Makefile > > create mode 100644 board/emulation/qemu-sbsa/acpi.c > > create mode 100644 board/emulation/qemu-sbsa/dsdt.asl > > create mode 100644 board/emulation/qemu-sbsa/lowlevel_init.S > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.c > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.env > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.h > > create mode 100644 board/emulation/qemu-sbsa/smc.c > > create mode 100644 configs/qemu-arm-sbsa_defconfig > > create mode 100644 doc/board/emulation/qemu-sbsa.rst > > create mode 100644 include/configs/qemu-sbsa.h > > With the tweaks below: > > Reviewed-by: Simon Glass <s...@chromium.org> > > [..] > > > diff --git a/arch/arm/dts/qemu-sbsa.dts b/arch/arm/dts/qemu-sbsa.dts > > new file mode 100644 > > index 0000000000..f743ea3863 > > --- /dev/null > > +++ b/arch/arm/dts/qemu-sbsa.dts > > @@ -0,0 +1,136 @@ > > +// SPDX-License-Identifier: GPL-2.0+ OR MIT > > +/* > > + * Devicetree with onboard devices for qemu_sbsa-ref for internal use only! > > + * DO NOT PASS TO THE OS! > > + * > > + * As QEMU provides only a minimal devicetree this one is merged with > > + * it and then fixed at runtime. > > + * > > + * Copyright 2024 9elements GmbH > > + */ > > +#include "configs/qemu-sbsa.h" > > + > > +/dts-v1/; > > + > > +#define MAKE_PROP(x) (x>>32) (x&0xffffffff) > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + interrupt-parent = <&intc>; > > + compatible = "linux,sbsa-ref"; > > + > > + binman: binman { > > + multiple-images; > > + }; > > + > > + cpus { > > + /* Filled by fdtdec_board_setup() */ > > + }; > > + > > + memory { > > + /* Filled by fdtdec_board_setup() */ > > + }; > > + > > + soc { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + uart0 { > > + compatible = "arm,pl011"; > > + status = "okay"; > > + reg = <MAKE_PROP(SBSA_UART_BASE_ADDR) > > Can you use > > reg = /bits 64/ <0x60000000> > > instead? > > Same for those below.
Isn't that less readable ? -- Tom
signature.asc
Description: PGP signature
