On Thu, Oct 03, 2024 at 08:22:21AM +0200, Michael Nazzareno Trimarchi wrote:
> Hi
> 
> On Tue, Oct 1, 2024 at 2:25 PM Christian Marangi <ansuels...@gmail.com> wrote:
> >
> > We currently init the LED OFF when SW blink is triggered when
> > on_state_change() is called. This can be problematic for very short
> > period as the ON/OFF blink might never trigger.
> >
> > Toggle the LED (ON if OFF, OFF if ON) on initial SW blink to handle this
> > corner case and better display a LED blink from the user.
> >
> > Signed-off-by: Christian Marangi <ansuels...@gmail.com>
> > ---
> >  drivers/led/led_sw_blink.c | 17 +++++++++++++++--
> >  1 file changed, 15 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/led/led_sw_blink.c b/drivers/led/led_sw_blink.c
> > index 9e36edbee47..06a43db340c 100644
> > --- a/drivers/led/led_sw_blink.c
> > +++ b/drivers/led/led_sw_blink.c
> > @@ -103,8 +103,21 @@ bool led_sw_on_state_change(struct udevice *dev, enum 
> > led_state_t state)
> >                 return false;
> >
> >         if (state == LEDST_BLINK) {
> > -               /* start blinking on next led_sw_blink() call */
> > -               sw_blink->state = LED_SW_BLINK_ST_OFF;
> > +               struct led_ops *ops = led_get_ops(dev);
> > +
> > +               /*
> > +                * toggle LED initially and start blinking on next
> > +                * led_sw_blink() call.
> > +                */
> > +               switch (ops->get_state(dev)) {
> > +               case LEDST_ON:
> > +                       ops->set_state(dev, LEDST_OFF);
> > +                       sw_blink->state = LED_SW_BLINK_ST_OFF;
> > +               default:
> > +                       ops->set_state(dev, LEDST_ON);
> > +                       sw_blink->state = LED_SW_BLINK_ST_ON;
> > +               }
> > +
> >                 return true;
> 
> I think here error is not take in account. Is somenthing that we
> should care? and if not we should
> warning the user?

Yes it's intended. Here it's assumed these function works and are
present. The check are already done before calling the on_state_change.

> 
> Apart of that
> Reviewed-by: Michael Trimarchi <mich...@amarulasolutions.com>
> 
> michael
> 
> >         }
> >
> > --
> > 2.45.2
> >
> 
> 
> -- 
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> mich...@amarulasolutions.com
> __________________________________
> 
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> i...@amarulasolutions.com
> www.amarulasolutions.com

-- 
        Ansuel

Reply via email to