The cpu0-opp-table {} node does not exist in upstream Linux stm32mp151.dtsi
file, in order to enable conversion to OF_UPSTREAM, duplicate the node from
current U-Boot stm32mp151.dtsi into stm32mp15-u-boot.dtsi. This makes STM32
DTs buildable even with OF_UPSTREAM enabled. No functional change, since the
current U-Boot stm32mp151.dtsi already contains the cpu0-opp-table {} node,
stm32mp15-u-boot.dtsi is applied at the end, and does not bring in any new
content.Signed-off-by: Marek Vasut <[email protected]> --- Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: Sean Anderson <[email protected]> Cc: Simon Glass <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- V2: No change --- arch/arm/dts/stm32mp15-u-boot.dtsi | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index fe56f05616a..66d4c40c6a8 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -56,6 +56,24 @@ status = "okay"; }; }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + bootph-pre-ram; + opp-650000000 { + bootph-pre-ram; + opp-hz = /bits/ 64 <650000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0x1>; + }; + opp-800000000 { + bootph-pre-ram; + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1350000>; + opp-supported-hw = <0x2>; + }; + }; }; &bsec { @@ -82,14 +100,10 @@ bootph-all; }; -&cpu0_opp_table { - bootph-pre-ram; - opp-650000000 { - bootph-pre-ram; - }; - opp-800000000 { - bootph-pre-ram; - }; +&cpu0 { + nvmem-cells = <&part_number_otp>; + nvmem-cell-names = "part_number"; + operating-points-v2 = <&cpu0_opp_table>; }; &gpioa { -- 2.45.2
