From: Udit Kumar <[email protected]> J722S SOC have two variants as HS-FS and HS-SE. Add binman support for HS-SE variant.
Signed-off-by: Udit Kumar <[email protected]> [[email protected]: Fix load-dm-data entry and indentation] Signed-off-by: Jayesh Choudhary <[email protected]> --- arch/arm/dts/k3-j722s-binman.dtsi | 50 +++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm/dts/k3-j722s-binman.dtsi b/arch/arm/dts/k3-j722s-binman.dtsi index 28087a3b6f..6b52116657 100644 --- a/arch/arm/dts/k3-j722s-binman.dtsi +++ b/arch/arm/dts/k3-j722s-binman.dtsi @@ -7,6 +7,56 @@ #if IS_ENABLED(CONFIG_TARGET_J722S_R5_EVM) +&binman { + tiboot3-j722s-hs-evm.bin { + filename = "tiboot3-j722s-hs-evm.bin"; + ti-secure-rom { + content = <&u_boot_spl>, <&ti_fs_enc>, <&combined_tifs_cfg>, + <&combined_dm_cfg>, <&sysfw_inner_cert>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl>; + content-sysfw = <&ti_fs_enc>; + content-sysfw-data = <&combined_tifs_cfg>; + content-sysfw-inner-cert = <&sysfw_inner_cert>; + content-dm-data = <&combined_dm_cfg>; + load = <0x43c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x67000>; + load-dm-data = <0x43c7a800>; + }; + + u_boot_spl: u-boot-spl { + no-expanded; + }; + + ti_fs_enc: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-j722s-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + + combined_tifs_cfg: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + + sysfw_inner_cert: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-j722s-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + + combined_dm_cfg: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; +}; + &binman { tiboot3-j722s-hs-fs-evm.bin { filename = "tiboot3-j722s-hs-fs-evm.bin"; -- 2.34.1
