Dear Felix Radensky, In message <4dc2f72f.2050...@embedded-sol.com> you wrote: > > The closest example of using get_ram_size() I've found is > for MPC8548 TQM boards. But all these boards have 4-bank > memory devices, so I'm sure my case was tested. Don't you > think there can be a problem with reprogramming bank number > in this particular DDR controller ?
I haven't done this myself yet on this hardware, but I would be very surprised if you could not reprogram the controller. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de You might not be as stupid as you look. This is not hard. Let's think about this. I mean ... I'll think about this, and you can join in when you know the words. - Terry Pratchett, _Men at Arms_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot