On 2024/10/14 03:24, Heiko Stuebner wrote:
As most Rockchip boards do, the TS433 also uses uart2 for its serial output. Set the correct chosen entry for it. Tested-by: Uwe Kleine-König <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ upstream commit: e1cb5d8a92e41171bf4d5ddc459bd96372500901 ] (cherry picked from commit 1e1af2af2192490a3d174624ac1bb976aa6afffa)
Reviewed-by: Kever Yang <[email protected]> Thanks, - Kever
--- dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index da735c4764f..be1c2286c2d 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -13,6 +13,10 @@ model = "Qnap TS-433-4G NAS System 4-Bay"; compatible = "qnap,ts433", "rockchip,rk3568";+ chosen {+ stdout-path = "serial2:115200n8"; + }; + dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v";
