From: Reid Tonking <[email protected]> Define new CONFIG_K3_OPP_LOW under arm/mach-k3/Kconfig and add default value to j7200_evm_r5_defconfig
Signed-off-by: Reid Tonking <[email protected]> Signed-off-by: Aniket Limaye <[email protected]> --- v3: - Add Kconfig dependency on K3_AVS0 - Update commit msg to make it more clear - Link to v2: https://lore.kernel.org/u-boot/[email protected]/ Signed-off-by: Aniket Limaye <[email protected]> --- arch/arm/mach-k3/Kconfig | 7 +++++++ configs/j7200_evm_r5_defconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index f3f42b39213..c73396bfbf3 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -103,6 +103,13 @@ config SYS_K3_BOOT_CORE_ID int default 16 +config K3_OPP_LOW + depends on ARCH_K3 && K3_AVS0 + bool "Enable OPP_LOW on supported TI K3 SoCs" + help + Enabling this will allow Socs with the proper efuse to run at a lower + MPU core voltage and adjust frequency according to SoC trm + config K3_EARLY_CONS bool "Activate to allow for an early console during SPL" depends on SPL diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index f036a6fd46b..217759e5d1b 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -102,6 +102,7 @@ CONFIG_K3_SEC_PROXY=y CONFIG_FS_LOADER=y CONFIG_SPL_FS_LOADER=y CONFIG_K3_AVS0=y +# CONFIG_K3_OPP_LOW is not set CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_MMC_SDHCI=y -- 2.47.0
