On Wed, Nov 20, 2024 at 01:16:00PM +1300, Chris Packham wrote: > The x250 and SE240 are series of 10G L2+ switches from Allied Telesis. > There are a number of them in the range but as far as U-Boot is > concerned all the CPU block components are the same so there's only one > board defined. > > Signed-off-by: Chris Packham <[email protected]> [snip] > diff --git a/include/configs/x250.h b/include/configs/x250.h > new file mode 100644 > index 000000000000..5a3f445e218c > --- /dev/null > +++ b/include/configs/x250.h > @@ -0,0 +1,54 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2024 Allied Telesis > + */ > + > +#ifndef __X250_H_ > +#define __X250_H_ > + > +/* > + * High Level Configuration Options (easy to change) > + */ > +#define CFG_SYS_TCLK 250000000 /* 250MHz */ > + > +/* additions for new ARM relocation support */ > +#define CFG_SYS_SDRAM_BASE 0x00000000 > + > +/* auto boot */ > + > +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ > + 115200, 230400, 460800, 921600 }
We really can't use the default table? > + > +/* > + * Other required minimal configurations > + */ > + > +/* When runtime detection fails this is the default */ > + > +/* USB ethernet */ Dead comments. > + > +/* > + * PCI configuration > + */ Probably doesn't apply to this section.. > +#ifdef CONFIG_DISTRO_DEFAULTS > +#define BOOT_TARGET_DEVICES(func) \ > + func(USB, usb, 0) \ > + func(SCSI, scsi, 0) \ > + func(PXE, pxe, na) \ > + func(DHCP, dhcp, na) > + > +#include <config_distro_bootcmd.h> > +#else > +#define BOOTENV > +#endif And you should move to bootstd. -- Tom
signature.asc
Description: PGP signature
