> -----Original Message-----
> From: Heiko Stuebner <[email protected]>
> Sent: Thursday, November 21, 2024 11:27 PM
> To: [email protected]; [email protected]; [email protected]
> Cc: [email protected]; [email protected]; [email protected]; [email protected];
> [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected];
> [email protected]; [email protected];
> [email protected]
> Subject: [PATCH 18/20] mmc: rockchip_dw_mmc: Add support for rk3576
>
> The rk3576 uses a different base-compatible, as starting with this
> generation, the clock phase tuning is done via registers inside
> the mmc controller and not from inside the CRU.
>
> In U-Boot we do not tune at all, so no other code changes are
> necessary.
>
> Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Best Regards,
Jaehoon Chung
> ---
> drivers/mmc/rockchip_dw_mmc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
> index 422b8f7e4c8..7a72abaa38a 100644
> --- a/drivers/mmc/rockchip_dw_mmc.c
> +++ b/drivers/mmc/rockchip_dw_mmc.c
> @@ -171,6 +171,7 @@ static int rockchip_dwmmc_bind(struct udevice *dev)
> static const struct udevice_id rockchip_dwmmc_ids[] = {
> { .compatible = "rockchip,rk2928-dw-mshc" },
> { .compatible = "rockchip,rk3288-dw-mshc" },
> + { .compatible = "rockchip,rk3576-dw-mshc" },
> { }
> };
>
> --
> 2.45.2
