> Subject: [PATCH v2] ARM: imx: Replace YModem with SDP on Data > Modul i.MX8M Mini eDM SBC SPL > > The YModem support in SPL was never really used on this device, the > SDP support is much more convenient on i.MX8M Mini based > hardware. Replace the YModem support with SDP support. > > The SDP can be utilized by forcing the board into SDP boot mode by > grounding test point right next to silkscreen label U30, and then by > using mfgtools 'uuu -brun spl flash.bin' once the device enumerates on > host system USB bus. The SDP capable USB port is available on the USB > micro-B port on the base board. > > Signed-off-by: Marek Vasut <[email protected]> > ---
Reviewed-by: Peng Fan <[email protected]>
