On Thu, Nov 28, 2024 at 9:17 PM Marek Vasut <[email protected]> wrote: > > The YModem support in SPL was never really used on this device, > the SDP support is much more convenient on i.MX8M Mini based > hardware. Replace the YModem support with SDP support. > > The SDP can be utilized by forcing the board into SDP boot mode > by grounding test point right next to silkscreen label U30, and > then by using mfgtools 'uuu -brun spl flash.bin' once the device > enumerates on host system USB bus. The SDP capable USB port is > available on the USB micro-B port on the base board. > > Signed-off-by: Marek Vasut <[email protected]> > --- > NOTE: Would be nice to have in v2025.01
Applied it for master, thanks.
