Please don't top post, it really breaks up the flow of the conversation when people look at it later on. And please keep the list on CC.
On 13/05/11 06:31, shilpa jadav wrote: > Hi, > > I tried latest U-BOOT release from > git://git.denx.de/u-boot.git or http://git.denx.de/u-boot.git > > I am unable to compile it, i think da830/omapl137 support is not their in > u-boot. I got the error as mentioned below when i give the command > > u-boot# make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- > da830_omapl137_config The target you are after is da830evm_config. I know its there because I'm the board maintainer ;-) $ grep da830evm boards.cfg da830evm arm arm926ejs da8xxevm davinci davinci da830 is the name fo the omap-l137 which is not an OMAP but a Davinci device. omap-l137 is its TI marketing name. Nick. > > I get the error as:--- > > awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }' boards.cfg >> .boards.depend > make: *** No rule to make target `da830_omapl137_config'. Stop. > make: *** [da830_omapl137_config] Error 1 > > Can you tell the release which is supporting da830/omapl137 with USB > support. > > Thanks, > Shilpa > > > On Thu, May 12, 2011 at 2:30 PM, Nick Thompson <nick.thomp...@ge.com> wrote: > >> On 11/05/11 10:15, shilpa jadav wrote: >>> Hi , >>> When i am trying to compile u-boot for omapL137 by issuing the following >>> command >>> make da830_omapl137_evm_config CROSS_COMPILE=arm-none-linux-gnueabi- >>> >>> Our goal is to get USB up on the uboot . We are trying to boot OMAPL137 >> Evm >>> using USB mass storage device(Pen drive) >>> I have added the following macros in the /include/configs/da830_evm.h >>> (followed the instructions from CHANGELOG file) >>> #define CONFIG_CMD_USB 1 >>> #define CONFIG_USB_STORAGE 1 >>> #define CONFIG_USB_EHCI >>> #define CONFIG_USB_EHCI_IXP4XX 1 >>> #define CONFIG_EHCI_IS_TDI 1 >>> #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 >>> #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 >>> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 >>> #define CONFIG_LEGACY_USB_INIT_SEQ 1 >>> >>> This is the error i am seeing consistently. >>> >>> make[1]: Leaving directory >>> >> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/musb' >>> make -C drivers/usb/host/ >>> make[1]: Entering directory >>> >> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/host' >>> make[1]: *** No rule to make target `.depend', needed by `libusb_host.a'. >>> Stop. >>> make[1]: Leaving directory >>> >> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/host' >>> make: *** [drivers/usb/host/libusb_host.a] Error 2 >>> >>> Please help us solving this issue as this is very critical for our >>> development >> >> This u-boot version (from the DaVinci-PSP) is quite old now (2009.08) >> and, I believe, its da830/l137 code was never added to the community >> tree: community support started in Nov 2009 and USB support was added >> in Dec 2009. As such it can't be supported here. >> >> As mentioned da830 EVM is supported by the community tree and I would >> encourage you to used the latest release from >> git://git.denx.de/u-boot.git or http://git.denx.de/u-boot.git >> >> You can download snapshots, with a browser, from: >> http://git.denx.de/?p=u-boot.git;a=summary >> >> Nick. >> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
