Make static calls instead of iterating over the init_sequence_f arrays. Tested on a KV260 board (xilinx_zynqmp_kria_defconfig).
- With LTO enabled, the code size reported by bloat-o-meter is 1184 bytes less (-0.11%) - With LTO disabled, the code is 592 bytes smaller (-0.05%) - Execution time does not change in a noticeable way Signed-off-by: Jerome Forissier <[email protected]> --- common/board_f.c | 167 +++++++++++++++++++++++---------------------- include/initcall.h | 25 +++++++ 2 files changed, 111 insertions(+), 81 deletions(-) diff --git a/common/board_f.c b/common/board_f.c index a4d8850cb7d..ba1af3d8055 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -38,6 +38,7 @@ #include <spl.h> #include <status_led.h> #include <sysreset.h> +#include <time.h> #include <timer.h> #include <trace.h> #include <upl.h> @@ -870,58 +871,62 @@ static int initf_upl(void) return 0; } -static const init_fnc_t init_sequence_f[] = { - setup_mon_len, - CONFIG_IS_ENABLED(OF_CONTROL, (fdtdec_setup,)) - CONFIG_IS_ENABLED(TRACE_EARLY, (trace_early_init,)) - initf_malloc, - initf_upl, - log_init, - initf_bootstage, /* uses its own timer, so does not need DM */ - event_init, - bloblist_maybe_init, - setup_spl_handoff, - CONFIG_IS_ENABLED(CONSOLE_RECORD_INIT_F, (console_record_init,)) - INITCALL_EVENT(EVT_FSP_INIT_F), - arch_cpu_init, /* basic arch cpu dependent setup */ - mach_cpu_init, /* SoC/machine dependent CPU setup */ - initf_dm, - CONFIG_IS_ENABLED(BOARD_EARLY_INIT_F, (board_early_init_f,)) +static int initcall_run_f(void) +{ + int ret = 0; + + INITCALL(setup_mon_len); + CONFIG_IS_ENABLED(OF_CONTROL, (INITCALL(fdtdec_setup))); + CONFIG_IS_ENABLED(TRACE_EARLY, (INITCALL(trace_early_init))); + INITCALL(initf_malloc); + INITCALL(initf_upl); + INITCALL(log_init); + INITCALL(initf_bootstage); /* uses its own timer, so does not need DM */ + INITCALL(event_init); + INITCALL(bloblist_maybe_init); + INITCALL(setup_spl_handoff); + CONFIG_IS_ENABLED(CONSOLE_RECORD_INIT_F, + (INITCALL(console_record_init);)) + INITCALL_EVT(EVT_FSP_INIT_F); + INITCALL(arch_cpu_init); /* basic arch cpu dependent setup */ + INITCALL(mach_cpu_init); /* SoC/machine dependent CPU setup */ + INITCALL(initf_dm); + CONFIG_IS_ENABLED(BOARD_EARLY_INIT_F, (INITCALL(board_early_init_f);)) #if defined(CONFIG_PPC) || defined(CONFIG_SYS_FSL_CLK) || defined(CONFIG_M68K) /* get CPU and bus clocks according to the environment variable */ - get_clocks, /* get CPU and bus clocks (etc.) */ + INITCALL(get_clocks); /* get CPU and bus clocks (etc.) */ #endif #if !defined(CONFIG_M68K) || (defined(CONFIG_M68K) && !defined(CONFIG_MCFTMR)) - timer_init, /* initialize timer */ + INITCALL(timer_init); /* initialize timer */ #endif - CONFIG_IS_ENABLED(BOARD_POSTCLK_INIT, (board_postclk_init,)) - env_init, /* initialize environment */ - init_baud_rate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_options, /* say that we are here */ - display_text_info, /* show debugging info if required */ - checkcpu, - CONFIG_IS_ENABLED(SYSRESET, (print_resetinfo,)) + CONFIG_IS_ENABLED(BOARD_POSTCLK_INIT, + (INITCALL(board_postclk_init);)) + INITCALL(env_init); /* initialize environment */ + INITCALL(init_baud_rate); /* initialze baudrate settings */ + INITCALL(serial_init); /* serial communications setup */ + INITCALL(console_init_f); /* stage 1 init of console */ + INITCALL(display_options); /* say that we are here */ + INITCALL(display_text_info); /* show debugging info if required */ + INITCALL(checkcpu); + CONFIG_IS_ENABLED(SYSRESET, (INITCALL(print_resetinfo);)) /* display cpu info (and speed) */ - CONFIG_IS_ENABLED(DISPLAY_CPUINFO, (print_cpuinfo,)) - CONFIG_IS_ENABLED(DTB_RESELECT, (embedded_dtb_select,)) - CONFIG_IS_ENABLED(DISPLAY_BOARDINFO, (show_board_info,)) - INIT_FUNC_WATCHDOG_INIT - INITCALL_EVENT(EVT_MISC_INIT_F), - INIT_FUNC_WATCHDOG_RESET - CONFIG_IS_ENABLED(SYS_I2C_LEGACY, (init_func_i2c,)) - announce_dram_init, - dram_init, /* configure available RAM banks */ - CONFIG_IS_ENABLED(POST, (post_init_f,)) - INIT_FUNC_WATCHDOG_RESET + CONFIG_IS_ENABLED(DISPLAY_CPUINFO, (INITCALL(print_cpuinfo);)) + CONFIG_IS_ENABLED(DTB_RESELECT, (INITCALL(embedded_dtb_select);)) + CONFIG_IS_ENABLED(DISPLAY_BOARDINFO, (INITCALL(show_board_info);)) + WATCHDOG_INIT(); + INITCALL_EVT(EVT_MISC_INIT_F); + WATCHDOG_RESET(); + CONFIG_IS_ENABLED(SYS_I2C_LEGACY, (INITCALL(init_func_i2c);)) + INITCALL(announce_dram_init); + INITCALL(dram_init); /* configure available RAM banks */ + CONFIG_IS_ENABLED(POST, (INITCALL(post_init_f);)) + WATCHDOG_INIT(); #if defined(CFG_SYS_DRAM_TEST) - testdram, + INITCALL(testdram); #endif /* CFG_SYS_DRAM_TEST */ - INIT_FUNC_WATCHDOG_RESET - - CONFIG_IS_ENABLED(POST, (init_post,)) - INIT_FUNC_WATCHDOG_RESET + WATCHDOG_RESET(); + CONFIG_IS_ENABLED(POST, (INITCALL(init_post);)) + WATCHDOG_RESET(); /* * Now that we have DRAM mapped and working, we can * relocate the code and continue running from DRAM. @@ -934,48 +939,48 @@ static const init_fnc_t init_sequence_f[] = { * - monitor code * - board info struct */ - setup_dest_addr, + INITCALL(setup_dest_addr); #if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_OF_INITIAL_DTB_READONLY) - fix_fdt, + INITCALL(fix_fdt); #endif #ifdef CFG_PRAM - reserve_pram, + INITCALL(reserve_pram); #endif - reserve_round_4k, - setup_relocaddr_from_bloblist, - arch_reserve_mmu, - reserve_video, - reserve_trace, - reserve_uboot, - reserve_malloc, - reserve_board, - reserve_global_data, - reserve_fdt, + INITCALL(reserve_round_4k); + INITCALL(setup_relocaddr_from_bloblist); + INITCALL(arch_reserve_mmu); + INITCALL(reserve_video); + INITCALL(reserve_trace); + INITCALL(reserve_uboot); + INITCALL(reserve_malloc); + INITCALL(reserve_board); + INITCALL(reserve_global_data); + INITCALL(reserve_fdt); #if defined(CONFIG_OF_BOARD_FIXUP) && defined(CONFIG_OF_INITIAL_DTB_READONLY) - reloc_fdt, - fix_fdt, + INITCALL(reloc_fdt); + INITCALL(fix_fdt); #endif - reserve_bootstage, - reserve_bloblist, - reserve_arch, - reserve_stacks, - dram_init_banksize, - show_dram_config, - INIT_FUNC_WATCHDOG_RESET - setup_bdinfo, - display_new_sp, - INIT_FUNC_WATCHDOG_RESET + INITCALL(reserve_bootstage); + INITCALL(reserve_bloblist); + INITCALL(reserve_arch); + INITCALL(reserve_stacks); + INITCALL(dram_init_banksize); + INITCALL(show_dram_config); + WATCHDOG_RESET(); + INITCALL(setup_bdinfo); + INITCALL(display_new_sp); + WATCHDOG_RESET(); #if !defined(CONFIG_OF_BOARD_FIXUP) || !defined(CONFIG_OF_INITIAL_DTB_READONLY) - reloc_fdt, + INITCALL(reloc_fdt); #endif - reloc_bootstage, - reloc_bloblist, - setup_reloc, + INITCALL(reloc_bootstage); + INITCALL(reloc_bloblist); + INITCALL(setup_reloc); #if defined(CONFIG_X86) || defined(CONFIG_ARC) - copy_uboot_to_ram, - do_elf_reloc_fixups, + INITCALL(copy_uboot_to_ram); + INITCALL(do_elf_reloc_fixups); #endif - clear_bss, + INITCALL(clear_bss); /* * Deregister all cyclic functions before relocation, so that * gd->cyclic_list does not contain any references to pre-relocation @@ -985,12 +990,12 @@ static const init_fnc_t init_sequence_f[] = { * This should happen as late as possible so that the window where a * watchdog device is not serviced is as small as possible. */ - cyclic_unregister_all, + INITCALL(cyclic_unregister_all); #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) - jump_to_copy, + INITCALL(jump_to_copy); #endif - NULL, -}; + return ret; +} void board_init_f(ulong boot_flags) { @@ -1000,7 +1005,7 @@ void board_init_f(ulong boot_flags) gd->flags &= ~GD_FLG_HAVE_CONSOLE; gd->boardf = &boardf; - if (initcall_run_list(init_sequence_f)) + if (initcall_run_f()) hang(); #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ diff --git a/include/initcall.h b/include/initcall.h index 62d3bb67f08..72faab42ada 100644 --- a/include/initcall.h +++ b/include/initcall.h @@ -35,4 +35,29 @@ typedef int (*init_fnc_t)(void); */ int initcall_run_list(const init_fnc_t init_sequence[]); +#define INITCALL(_call) \ + do { \ + if (!ret) { \ + debug("%s(): calling %s()\n", __func__, #_call); \ + ret = _call(); \ + } \ + } while (0) + +#define INITCALL_EVT(_evt) \ + do { \ + if (!ret) { \ + debug("%s(): event %d/%s\n", __func__, _evt, \ + event_type_name(_evt)) ; \ + ret = event_notify_null(_evt); \ + } \ + } while (0) + +#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG) +#define WATCHDOG_INIT() INITCALL(init_func_watchdog_init) +#define WATCHDOG_RESET() INITCALL(init_func_watchdog_reset) +#else +#define WATCHDOG_INIT() +#define WATCHDOG_RESET() +#endif + #endif -- 2.43.0
