> -----Original Message-----
> From: Shree Ramamoorthy <[email protected]>
> Sent: Thursday, December 19, 2024 2:13 AM
>
> Replace printf() with pr_err() because pr_err() has a uniform print format
> and takes into consideration the log levels supported.
>
> Signed-off-by: Shree Ramamoorthy <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Best Regards,
Jaehoon Chung
> ---
> drivers/power/regulator/tps65219_regulator.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/power/regulator/tps65219_regulator.c
> b/drivers/power/regulator/tps65219_regulator.c
> index b7124fed0245..4b0fb205909a 100644
> --- a/drivers/power/regulator/tps65219_regulator.c
> +++ b/drivers/power/regulator/tps65219_regulator.c
> @@ -250,7 +250,7 @@ static int tps65219_ldo_probe(struct udevice *dev)
> /* idx must be in 1..TPS65219_LDO_NUM */
> idx = dev->driver_data;
> if (idx < 1 || idx > TPS65219_LDO_NUM) {
> - printf("Wrong ID for regulator\n");
> + pr_err("Wrong ID for regulator\n");
> return -EINVAL;
> }
>
> @@ -271,7 +271,7 @@ static int tps65219_buck_probe(struct udevice *dev)
> /* idx must be in 1..TPS65219_BUCK_NUM */
> idx = dev->driver_data;
> if (idx < 1 || idx > TPS65219_BUCK_NUM) {
> - printf("Wrong ID for regulator\n");
> + pr_err("Wrong ID for regulator\n");
> return -EINVAL;
> }
>
> --
> 2.34.1
