The convention is to set bit 32 to indicate an I/O access. Do this when using an ISA serial port.
Signed-off-by: Simon Glass <[email protected]> --- boot/upl_common.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/boot/upl_common.c b/boot/upl_common.c index b0246f72597..a5a1da9cb57 100644 --- a/boot/upl_common.c +++ b/boot/upl_common.c @@ -62,7 +62,7 @@ int upl_add_serial(struct upl_serial *ser) { struct udevice *dev = gd->cur_serial_dev; struct serial_device_info info; - struct memregion region; + u64 addr; int ret; if (!dev) @@ -74,10 +74,13 @@ int upl_add_serial(struct upl_serial *ser) ser->compatible = ofnode_read_string(dev_ofnode(dev), "compatible"); ser->clock_frequency = info.clock; ser->current_speed = info.baudrate; - region.base = info.addr; - region.size = info.size; - if (!alist_add(&ser->reg, region)) - return -ENOMEM; + + /* Set bit 32 of the address if using I/O */ + addr = info.addr; + if (info.addr_space == SERIAL_ADDRESS_SPACE_IO) + addr |= BIT_ULL(32); + ret = upl_add_region(&ser->reg, addr, info.size); + ser->reg_io_shift = info.reg_shift; ser->reg_offset = info.reg_offset; ser->reg_io_width = info.reg_width; -- 2.43.0
