> -----邮件原件----- > 发件人: Tim Harvey <[email protected]> > 发送时间: 2025年1月3日 7:13 > 收件人: Alice Guo (OSS) <[email protected]> > 抄送: Tom Rini <[email protected]>; Stefano Babic <[email protected]>; Fabio > Estevam <[email protected]>; dl-uboot-imx <[email protected]>; Lukasz > Majewski <[email protected]>; Sean Anderson <[email protected]>; Simon > Glass <[email protected]>; Alper Nebi Yasak <[email protected]>; > [email protected]; [email protected]; Alice Guo <[email protected]>; Ye Li > <[email protected]>; Peng Fan <[email protected]> > 主题: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board > basic support > > Caution: This is an external email. Please take care when clicking links or > opening attachments. When in doubt, report the message using the 'Report > this email' button > > > On Thu, Dec 19, 2024 at 6:57 PM Alice Guo <[email protected]> wrote: > > > > From: Ye Li <[email protected]> > > > > This patch adds i.MX95 19x19 EVK board basic support. > > > > Signed-off-by: Ye Li <[email protected]> > > Signed-off-by: Alice Guo <[email protected]> > > Reviewed-by: Peng Fan <[email protected]> > > --- > > arch/arm/dts/imx95-19x19-evk-u-boot.dtsi | 224 > ++++++++++++++++++++++++++ > > arch/arm/mach-imx/imx9/Kconfig | 6 + > > arch/arm/mach-imx/imx9/scmi/container.cfg | 10 ++ > > arch/arm/mach-imx/imx9/scmi/imximage.cfg | 15 ++ > > arch/arm/mach-imx/imx9/scmi/soc.c | 1 + > > board/freescale/imx95_evk/Kconfig | 12 ++ > > board/freescale/imx95_evk/MAINTAINERS | 6 + > > board/freescale/imx95_evk/Makefile | 11 ++ > > board/freescale/imx95_evk/imx95_19x19_evk.env | 95 +++++++++++ > > board/freescale/imx95_evk/imx95_evk.c | 54 +++++++ > > board/freescale/imx95_evk/spl.c | 117 ++++++++++++++ > > configs/imx95_19x19_evk_defconfig | 178 > ++++++++++++++++++++ > > doc/board/nxp/imx95_evk.rst | 109 +++++++++++++ > > doc/board/nxp/index.rst | 1 + > > include/configs/imx95_evk.h | 36 +++++ > > 15 files changed, 875 insertions(+) > > > > Hi Alice, > > I found some issues with imx95_19x19_evk.env (see below) > > <snip> > > diff --git a/board/freescale/imx95_evk/imx95_19x19_evk.env > > b/board/freescale/imx95_evk/imx95_19x19_evk.env > > new file mode 100644 > > index > > > 0000000000000000000000000000000000000000..27e09d3d70a068efb97d6 > 9b27089 > > d1f213f39ee9 > > --- /dev/null > > +++ b/board/freescale/imx95_evk/imx95_19x19_evk.env > > @@ -0,0 +1,95 @@ > > +sec_boot=no > > +initrd_addr=0x93800000 > > +emmc_dev=0 > > +sd_dev=1 > > +prepare_mcore=setenv mcore_clk clk-imx95.mcore_booted > > I see where mcore_clk is used but nothing uses prepare_mcore. Also there is > no upstream Linux clk-imx95 driver yet so this really doesn't do anything > useful. Has a clk-imx95 driver been submitted?
Hi Tim, i.MX95 use clk-scmi.c driver, so no clk-imx95. And there is no prepare_mcore, this env needs to be dropped. Thanks for pointing out my errors. I will correct them. Best Regards, Alice Guo
