Add tee node in SoC u-boot device trees. Use a kconfig entry to specify load and entry addresses for the op-tee image in the respective defconfig. Default IMX8M_OPTEE_LOAD_ADDR is supplied. To keep it simple, the same addresses are used for each SoC as are defined in upstream tf-a (BL32_BASE) [1].
[1] https://github.com/ARM-software/arm-trusted-firmware/tree/master/plat/imx/imx8m Signed-off-by: Yannic Moog <y.m...@phytec.de> --- arch/arm/dts/imx8mm-u-boot.dtsi | 17 ++++++++++++++++- arch/arm/dts/imx8mn-u-boot.dtsi | 17 ++++++++++++++++- arch/arm/dts/imx8mp-u-boot.dtsi | 17 ++++++++++++++++- arch/arm/dts/imx8mq-u-boot.dtsi | 17 ++++++++++++++++- arch/arm/mach-imx/imx8m/Kconfig | 11 +++++++++++ 5 files changed, 75 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index d31bc822532..ecc2319279e 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -164,6 +164,21 @@ }; #endif + tee: tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + + tee-os { + filename = "tee.bin"; + optional; + }; + }; + binman_fip: fip { arch = "arm64"; compression = "none"; @@ -192,7 +207,7 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI - loadables = "atf"; + loadables = "atf", "tee"; #endif }; }; diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index 6d80d856365..4a4498b36b0 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -240,6 +240,21 @@ }; #endif + tee: tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + + tee-os { + filename = "tee.bin"; + optional; + }; + }; + binman_fip: fip { arch = "arm64"; compression = "none"; @@ -268,7 +283,7 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI - loadables = "atf"; + loadables = "atf", "tee"; #endif }; }; diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index 56749ccacd2..9ede98a11e4 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -185,6 +185,21 @@ }; #endif + tee: tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + + tee-os { + filename = "tee.bin"; + optional; + }; + }; + @fdt-SEQ { description = "NAME"; type = "flat_dt"; @@ -204,7 +219,7 @@ fdt = "fdt-SEQ"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI - loadables = "atf"; + loadables = "atf", "tee"; #endif }; }; diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi index d7a83a78f4d..93e2ef27f7c 100644 --- a/arch/arm/dts/imx8mq-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-u-boot.dtsi @@ -144,6 +144,21 @@ }; #endif + tee: tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>; + + tee-os { + filename = "tee.bin"; + optional; + }; + }; + fdt { compression = "none"; description = "NAME"; @@ -164,7 +179,7 @@ fdt = "fdt"; firmware = "uboot"; #ifndef CONFIG_ARMV8_PSCI - loadables = "atf"; + loadables = "atf", "tee"; #endif }; }; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index b254a50b091..8aeb1ea75f7 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -37,6 +37,17 @@ config SYS_HAS_ARMV8_SECURE_BASE If enabled, please also define the value for ARMV8_SECURE_BASE, for i.MX8M, it could be some address in OCRAM. +config IMX8M_OPTEE_LOAD_ADDR + hex "Load address of OPTEE image" + default 0xbe000000 if IMX8MM + default 0xbe000000 if IMX8MN + default 0x56000000 if IMX8MP + default 0xfe000000 if IMX8MQ + help + The load and entry address for the OPTEE image. This value defaults to + the one defined in tf-a if not provided in the board defconfig file. + + choice prompt "NXP i.MX8M board select" optional -- 2.43.0
