Hi Marek,
On 1/12/25 11:36 PM, Marek Vasut wrote:
Implement custom U_BOOT_FIT_LOADABLE_HANDLER and
armv8_switch_to_el2_prep()
handling in case the TFA was loaded. The loadables handler sets up
custom
handoff structure used by Renesas TFA fork in fixed location in DRAM and
indicates the TFA has been loaded.
The custom armv8_switch_to_el2_prep() handling tests whether the TFA
BL31
was previously loaded and the custom handoff structure was set up,
and if
so, jumps to TFA BL31 which switches from EL3 to EL2 and then returns to
U-Boot just past bl in armv8_switch_to_el2() to finish starting the
Linux
kernel.
The jump to Linux through TFA works in such a way that the custom
armv8_switch_to_el2_prep() handler configures the custom handoff
structure
such that the target jump address of the TFA BL31 on exit is set to the
armv8_switch_to_el2() + 4, which is just past the bl, and just before
the
U-Boot code which implements the Linux kernel boot from either EL. The
registers passed through the TFA BL31 are all the registers passed into
armv8_switch_to_el2_prep() to assure maximum compatibility with all the
boot modes. The armv8_switch_to_el2_prep() handler jumps to the TFA
BL31,
which does its setup, drops EL from EL3 to EL2 and finally jumps to the
armv8_switch_to_el2() + 4 entry point, which then allows U-Boot to boot
the Linux kernel the usual way.
In order to build suitable kernel fitImage, build TFA first, temporarily
from downstream repository:
remote: https://eur02.safelinks.protection.outlook.com/?
url=https%3A%2F%2Fgithub.com%2Frenesas-rcar%2Farm-trusted-
firmware.git&data=05%7C02%7Cquentin.schulz%40cherry.de%7C6ab2eb623e32425379f108dd407e5a7c%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C638737633628498421%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=DWQfUm5mp9%2FMCUxvFFbO1yfjKlvmtfiOD8VTkN%2BEZKk%3D&reserved=0
branch: rcar_gen4_v2.7_v4x
```
$ git clean -fqdx
$ MBEDTLS_DIR=/path/to/mbedtls/ make -j$(nproc) bl31 \
PLAT=rcar_gen4 ARCH=aarch64 LSI=V4H SPD=none \
CTX_INCLUDE_AARCH32_REGS=0 MBEDTLS_COMMON_MK=1 \
PTP_NONSECURE_ACCESS=1 LOG_LEVEL=20 DEBUG=0 \
ENABLE_ASSERTIONS=0 E=0
```
Build Linux kernel Image and device tree from current mainline Linux
kernel repository, obtain 'Image' and 'r8a779g0-white-hawk.dtb' .
Bundle the files together using provided fit-image.its fitImage
description:
```
$ mkimage -f fit-image.its fitImage
```
To start the kernel fiImage generated in previous step, load fitImage
to DRAM and use the 'bootm' command to start it:
=> load 0x58000000 ... fitImage && bootm 0x58000000
Signed-off-by: Marek Vasut <[email protected]>
---
Cc: Andre Przywara <[email protected]>
Cc: Caleb Connolly <[email protected]>
Cc: Igor Opaniuk <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Julien Masson <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: Maxim Moskalets <[email protected]>
Cc: Michael Walle <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Patrick Rudolph <[email protected]>
Cc: Paul Barker <[email protected]>
Cc: Paul-Erwan Rio <[email protected]>
Cc: Peter Hoyes <[email protected]>
Cc: Raymond Mao <[email protected]>
Cc: Sam Protsenko <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Sughosh Ganu <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: [email protected]
---
board/renesas/common/gen4-common.c | 118 +++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/board/renesas/common/gen4-common.c b/board/renesas/
common/gen4-common.c
index 52a0639073b..c7f3f9a30ab 100644
--- a/board/renesas/common/gen4-common.c
+++ b/board/renesas/common/gen4-common.c
@@ -7,11 +7,13 @@
#include <asm/arch/renesas.h>
#include <asm/arch/sys_proto.h>
+#include <asm/armv8/mmu.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/processor.h>
#include <asm/system.h>
+#include <image.h>
#include <linux/errno.h>
#define RST_BASE 0xE6160000 /* Domain0 */
@@ -88,3 +90,119 @@ int ft_board_setup(void *blob, struct bd_info *bd)
{
return 0;
}
+
+/* R-Car Gen4 TFA BL31 handoff structure and handling. */
+struct param_header {
+ u8 type;
+ u8 version;
+ u16 size;
+ u32 attr;
+};
+
+struct tfa_image_info {
+ struct param_header h;
+ uintptr_t image_base;
+ u32 image_size;
+ u32 image_max_size;
+};
+
+struct aapcs64_params {
+ u64 arg0;
+ u64 arg1;
+ u64 arg2;
+ u64 arg3;
+ u64 arg4;
+ u64 arg5;
+ u64 arg6;
+ u64 arg7;
+};
+
+struct entry_point_info {
+ struct param_header h;
+ uintptr_t pc;
+ u32 spsr;
+ struct aapcs64_params args;
+};
+
+struct bl2_to_bl31_params_mem {
+ struct tfa_image_info bl32_image_info;
+ struct tfa_image_info bl33_image_info;
+ struct entry_point_info bl33_ep_info;
+ struct entry_point_info bl32_ep_info;
+};
+
+/* Default jump address, return to U-Boot */
+#define BL33_BASE 0x44100000
+/* Custom parameters address passed to TFA by ICUMXA loader */
+#define PARAMS_BASE 0x46422200
+
Shouldn't we rather set those as offset compared to the load/entry
address passed in the ITS?
+/* Usually such a structure is produced by ICUMXA and passed in at
0x46422200 */
+static const struct bl2_to_bl31_params_mem blinfo_template = {
+ .bl33_ep_info.h.type = 1, /* PARAM_EP */
+ .bl33_ep_info.h.version = 2, /* Version 2 */
+ .bl33_ep_info.h.size = sizeof(struct entry_point_info),
+ .bl33_ep_info.h.attr = 0x81, /* Executable | Non-Secure */
+ .bl33_ep_info.spsr = 0x2c9, /* Mode=EL2, SP=ELX,
Exceptions=OFF */
+ .bl33_ep_info.pc = BL33_BASE,
+
+ .bl33_image_info.h.type = 1, /* PARAM_EP */
+ .bl33_image_info.h.version = 2, /* Version 2 */
+ .bl33_image_info.h.size = sizeof(struct image_info),
+ .bl33_image_info.h.attr = 0,
+ .bl33_image_info.image_base = BL33_BASE,
+};
+
+static bool tfa_bl31_image_loaded;
+static ulong tfa_bl31_image_addr;
+
+static void tfa_bl31_image_process(ulong image, size_t size)
+{
+ /* Custom parameters address passed to TFA by ICUMXA loader */
+ struct bl2_to_bl31_params_mem *blinfo = (struct
bl2_to_bl31_params_mem *)PARAMS_BASE;
+
+ /* Clear a page and copy template */
+ memset((void *)PARAMS_BASE, 0, PAGE_SIZE);
+ memcpy(blinfo, &blinfo_template, sizeof(*blinfo));
+ tfa_bl31_image_addr = image;
+ tfa_bl31_image_loaded = true;
+}
+
+U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TFA_BL31, tfa_bl31_image_process);
+
+void armv8_switch_to_el2_prep(u64 args, u64 mach_nr, u64 fdt_addr,
+ u64 arg4, u64 entry_point, u64 es_flag)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t)(void *)tfa_bl31_image_addr;
+ struct bl2_to_bl31_params_mem *blinfo =
+ (struct bl2_to_bl31_params_mem *)PARAMS_BASE;
+
+ /*
+ * Destination address in arch/arm/cpu/armv8/transition.S
+ * right past the first bl in armv8_switch_to_el2() to let
+ * the rest of U-Boot pre-Linux code run. The code does run
+ * without stack pointer!
+ */
+ const u64 ep = ((u64)(uintptr_t)&armv8_switch_to_el2) + 4;
+
+ /* If TFA BL31 was not part of the fitImage, do regular boot. */
+ if (!tfa_bl31_image_loaded)
+ return;
+
+ /*
+ * Set up kernel entry point and parameters:
+ * x0 is FDT address, x1..x3 must be 0
+ */
+ blinfo->bl33_ep_info.pc = ep;
+ blinfo->bl33_ep_info.args.arg0 = args;
+ blinfo->bl33_ep_info.args.arg1 = mach_nr;
+ blinfo->bl33_ep_info.args.arg2 = fdt_addr;
+ blinfo->bl33_ep_info.args.arg3 = arg4;
+ blinfo->bl33_ep_info.args.arg4 = entry_point;
+ blinfo->bl33_ep_info.args.arg5 = es_flag;
+ blinfo->bl33_image_info.image_base = ep;
+
+ /* Jump to TFA BL31 */
+ image_entry();
+}
Shouldn't we have a weak implementation that SoC vendor can override
if they feel like it?
To me this feels like it could be much quicker adopted if we had some
default people could try out for their boards.
We already have a generic spl_invoke_atf() so why not the same for
this mechanism? As far as I could tell, we get the load address of TEE
and U- Boot proper (bl32 and bl33) and pass it the FDT (or nothing if
SPL_ATF_NO_PLATFORM_PARAM symbol set).
I am not too sure who and how TEE will be started as it needs to be
executing in EL3 too I believe? So we may still have to provide that
one? BL33 would be the kernel params like you did in this patch. Then
the bl31 param could also be either the fdt or nothing if
ATF_NO_PLATFORM_PARAM is set.
