The dwc3 driver allows SoC-specific configuration via the dwc3_glue_ops structure. Glue drivers, which implement dwc3_glue_ops, usually just define the .glue_configure() function.
dwc3-am62 is such glue driver which does not need to be a SIMPLE_BUS since it does not interact with any child device. Use UCLASS_NOP instead as done in the dwc3-generic-wrapper. Reviewed-by: Siddharth Vadapalli <[email protected]> Signed-off-by: Mattijs Korpershoek <[email protected]> --- This is a small cleanup intended for next. This has been tested on AM62X SK EVM using: => fastboot usb 0 $ fastboot devices ???????????? Android Fastboot --- Changes in v2: - Updated commit message (Siddharth) - Added Siddharth's R-b - Link to v1: https://lore.kernel.org/r/[email protected] --- drivers/usb/dwc3/dwc3-am62.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 99519602eb2c66299445163fafcdb3e065c89eda..66164d0a80c0264bfc400426782324f8a57b8bd8 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -116,7 +116,7 @@ static const struct udevice_id dwc3_am62_match[] = { U_BOOT_DRIVER(dwc3_am62_wrapper) = { .name = "dwc3-am62", - .id = UCLASS_SIMPLE_BUS, + .id = UCLASS_NOP, .of_match = dwc3_am62_match, .bind = dwc3_glue_bind, .probe = dwc3_glue_probe, --- base-commit: 8dd7186ca7821446c6f46b6cccefab502912f2e0 change-id: 20250226-dwc3-am62-gadget-nop-4b33c79d8d5e Best regards, -- Mattijs Korpershoek <[email protected]>
